All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I backed up all the data on external hard drive and did a clean install of xp pro. I can't find a lot of folders, files or programs.

  I'm looking for advice search to find photos, documents and MS Office applications, most seem to be missing. I had a large photo collection and cannot find a few hundred off more 4 000.

  How can I do to get the MS DOS programs? I have more drives. Is it possible to download the programs I had? MS will be able to see that the key is stored somewhere in my computer or external hard drive?

  A backup does not recover programs, only data.
  If you did a clean install of the program keys that are lost, so you have to install the origonal with all key media programs

• # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

  I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

  How can I get to the lock screen?   I have tried F11 and Esc.

  BreBruce-Tampa

  Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• transfer files from computer to external hard drive

  I will reset or reinstall IE 9 due to problems. I would like to know if I can transfer these files on an external hard drive and how

  to make this function. .

  Sunday, October 21, 2012 16:18:40 + 0000, dpvhouse wrote:

  I will reset or reinstall IE 9 due to problems. I would like to know if I can transfer these files on an external hard drive and how to do this function.

  Which files are those files?

  You can transfer files from one disk to another without what
  If one of the disks is external or not. The process is identical
  for two players to drive (or thumb)).

  There are several ways to do so. Drag-and-drop and copy - paste are
  two of the simplest. If you don't know how to do these, post back to
  more information.

  Ken Blake, Microsoft MVP

• Each folder in my external hard drive and Flash Drives have all been replaced by cmd shortcuts by accident

  I don't know how it happened but one night, I unplugged my external hard drive, and I remember vaguely the prompt being opened by accident after I plugged the external drive again the next day. The computer says my drive needed for formatting, that does not make sense because my drive was not related at the time. Well, when I reconnected my drive and restarted the computer, each folder in my external hard drive, I created in recent months, had been changed to shortcuts by the computer. The target location for each folder on my external hard drive and readers flash is (C:\Windows\System32). So whenever I click on a folder for documents, it will open in another screen, but I can't ever see as a folder only content inside, I need to find a way to cancel some setting in my computer that changes every folder I creat in a shortcut that reads-card: cmd (C:\Windows\System32)

  Hi Gordon Gekko.

  It seems that the data on the hard drive is damaged. I suggest you plug the drive on another computer or another port on the same computer to see if the data is accessible.

  If you take a backup of the data in the drive and try to format the drive.

  For more information, see the following link:

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  You can also use your favorite search engine to download third party software to recover the data and then format the drive, so it's is more corrupt.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

  This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• Backup file on my personal profile to an external hard drive impossible. I get an error saying "the directory is read-only, please select another.

  Was able to backup from the Admin profile.

  Manufactures States problem is a file or a parameter block transfer, maybe a problem of attrib file. How to find the problem to be fixed.

  Last backup in the month of August without problem.

  Not aware of any major changes to the computer, can have added AVG anti virius since the last update protection.

  Hi LovingMN,

  · What is the full error message that you receive?

  · What type of backup you make?

  · Are there data saved on the external hard drive?

  Change the attributes of the file. You can check the link for the steps below: how to set, view, change, or remove special permissions for files and folders in Windows XP: http://support.microsoft.com/kb/308419

  This can also be caused by the destination drive. If there is no data saved on the external hard drive, you can format the drive and then try to save and check the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D when copying files from computer to external hard drive

  I am trying to copy some files from my drive HARD outside., but I get this error (error 0x8007045D: the request could not be performed because of an i/o device error).

  I run windows check disk on my external hard drive, I tried to run windows defrag, but it takes too Lowe and cancel (external HARD disk is 1 TB). I download a software defrag and defragmented my hard drive using fast (the software is O & O Defrag). I tried on another computer and got the same error. Is it a hardware problem. Y at - there any possibility to fix it. Thank you for helping

  Hello Nyfixen,

  1. have you changed the permission for the external hard drive or files you are trying to copy?

  2. you have all important data (files) stored on the external hard drive?

  3. are you able to copy the external hard drive to the computer?

  The Autorun.inf could not be a problem for that. It always seems to be a problem of permission for me. Some hard drives have a jumper on them for write protection. You should check the configuration of jumpers, thank you consult the manual that came with the hard drive for permissions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

  Format hard drive:

  Read this article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I move files from the hard drive of your computer to external hard drive.

  Original title: can I add an external hard drive to transfer music from windows media to free up space on the top of the Tower

  with windows media player to manage two mp3 players, running out of space on the top of the Tower, can I transfer and store all the music files on an external hard drive of 1 TB and use windows media player with the external hard drive?

  Hi PaulDocherty,

  I suggest you follow the methods given and check if it helps.

  Method 1: Please run the synchronization in your Windows Media Player.

  Please visit the link below to make a synchronization in your Windows Media Player;

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Method 2: You can also try to copy and paste option.

  Please visit the link below to copy files to your files on an external hard drive;

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  I hope this helps.

• My new Kindle Fire HD when connected to USB causes files on my external HARD drive to go away, they come back when the Kindle is disconnected and after a reboot, any help please

  If after installation with kindle, connected external HARD drive disappears

  USB ports are usually "matched" in groups, called hubs root.  These root hubs then control and distribute the power to the USB ports.  If any device on one of the two ports, the hub root, requires too much power, the other port loses power.  When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session.  Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.

  A free USB powered hub can help.  These allow usually additional power over USB ports, on its own USB ports.

• all play them at the same time with several videos tabs

  When I have several tabs open tabs with videos that all try to play at the same time

  Hi crazychief,

  Some Web sites will have this default tag value for their videos. You can try:

  • Enter about: config in the address bar and press to enter.
  • Agree that you will be attentive
  • Search for media.autoplay.enabled
  • Double click to change the false value

  Hope this helps!