All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

Similar Questions

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• XP Home only 2 users can access the internet

  I have a laptop Dell Inspiron 1300 Windows XP sp3.  I'm the only user for a few years until I've added my son as a different user (with administrator privileges).

  I have been using a USB WiFi dongle with success.
  However when my son connects, it cannot access the internet - not even with a link of ethernet wired router to wide band.
  I can ping sites like yahoo.com, but not access via a browser.
  Help, please
  Thank you
  David E.

  Hi David,

  1. what browser do you use to visit Web sites?

  2. If you are using Internet Explorer, then what is the version?

  3. What is the error message when you access a Web site?

  4. what security software is installed on the computer?

  I suggest you try the following steps if you use Internet Explorer to browse.

  Method 1: How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Check if the problem persists.

  Method 2: Create a new user account

  The user account may be damaged and because who you may not have access to the Internet. I suggest to create a new account and check.

  To add a new user to the computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_add_user.mspx?mfr=true

  If the problem does not occur in the new user account, and then transfer the data from the old account to the new account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• Why "problem loading page" appears when I try to start firefox? I can access the page relevent medium of internet explorer, but firefox cannot connect to the web.

  A few days ago Firefox has stopped working when you use the shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a & rls = org.mozilla: en - GB:official appears, even if when I paste this address in internet explore it works. What is preventing firefox to connect?

  One possible cause is security software (firewall) that blocks or limits Firefox without you informing on this subject, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox.

  See Server not found - the problems of connection and Configure the firewall so that Firefox can access the Internet and http://kb.mozillazine.org/Firewalls

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• Can access the shared folder by using the name of the server, but is unable to use the intellectual property

  

  Hi, I need help with a very strange problem.

  I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.

  So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.

  My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.

  I can using Ping IP or name of the computer for every user of AD.

  Please check the attached images.

  When I try to access it using IP, it gives me the following error:

  \\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.

  Currently, there are no available connection server to process the logon request.

  Hello

  You may need to ask the question on the TechNet Forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Can someone tell me how I can access the internet on my laptop to someone else's House?

  I want to take my computer on a visit, I can access the internet at home someone else with their supplier?

  Hi Huw,

  If it is a WIFI connection and they provide the access codes and Setup appropriate (and maybe even if they are not depending on how they are configured), it should be no problem.  You will probably need to create a new connection to connect to their network and possibly another new connection to connect to internet (if they are separated).  I created portable work of my wife to work from home in less than 5 minutes.

  If you need to connect with a cable, then you need a cable and they need a way to connect to their network or their internet connection or even a computer connected to the internet connection can be used by ICS to give you access (even once, after you have setup the proper connections and codes installation).

  The following may or may not be of help (although designed for Vista, you can get the general idea on their part and XP and W7will be similar and you should be able to work out the differences - if not, look how configure wireless internet access in "The BONES" of aid):

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links): http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista: http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista: http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf

  The truth is it is relatively easy and is done all the time by many people.  Think about all the people with laptops who take their origin and work at the same time and maybe even at Starbucks.

  I hope this helps.

  Good luck!

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

  When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

  Hello

  Follow these steps to solve the problem.

  
  Step 1
  a. Click Start, default programs
  b. Click set your default programs
  c. Select your browser from the list
  d. Click set this program as default
  e. click OK.

  Then proceed as follows:

  
  Step 2
  a. click settings by default access and computer program Set
  b. click on continue if you see the user account control prompt.
  c. click Customize
  d. Select your browser from the list
  e. click OK.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Connection WIFI mobile phone to the laptop, so I can access the web of the cell

  My laptop is connected to the internet by internet dongle, I want to connect my cell phone to the laptop via WIFI so I can access the Internet from the mobile phone, how to put in place on windows 7?

  You can configure a network hosted with your Windows 7 machine. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  Assuming that your USB dongle is a device high-speed 3G / 4G, you might also look into buying a router. Some examples...

  http://3gstore.com/index.php?Main_Page=index&cPath=35

  The advantage of the router, it is that you need not the Win 7 PC all the time so that your other devices have access to the public internet.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• Keyboard does not not on the desktop, but I can access the BIOS

  I have a desktop Compaq Presario SR1220NX w / XP SP3. Using the keyboard I can access the BIOS (F1), but it stops working when I get on the desktop. I tried 2 P/S, USB, wireless keyboards (they are all worked on other computers) and they do not work once I get on the desktop. When I press a key on the keyboard they make a thud. I have the latest version of the BIOS.

  I have reset the BIOS to its default settings, but it does not solve the problem.

  Any suggestions on how to solve this problem would be appreciated.

  Can you start in SafeMode (f8) on the blue HP screen?  If you can, then you might try to return to a well known system restore point.

• We can access the session scope variable just by using its name

  Java EE 6 tutorial contains a "Case Study of the Duke's Bookstore example". I did not understand after statements of this case study:
  
  * bookdetails. XHTML *.
  
  {code}
  < h:outputText value = "#{selected.title}" / >
  {code}
  
  * BookstoreBean.Java*
  
  {code}
  public String details() {}
  Context()
  . getExternalContext()
  . getSessionMap()
  .put)
  "selected."
  getFeatured());
  
  return ('bookdetails");
  }
  {code}
  
  I want to know we can access the defined in bookdetails.xhtml session variable by simply using his name as done previously?

  This is a feature of basic Expression Language (EL), it is not specific to JSF. And it is not specific to the scope of the session, or you can put the beans in any area (page, request, session, application, flash, conversation, regardless of how extensive custom that you create) and reference it using EL only his name. The thing you need to take care of, is that the bean lives in a scope, which can be done using JSF specific or files of configuration, through CDI, annotations or by manually setting the bean in a specific through Java code scope. It is flexible, that is the nature of the Java platform.

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• I can access the internet, get on facebook and hotmail, but I can't play games on facebook and I can not open or respond to my emails

  I can access the internet, get on facebook and hotmail, but I can't pllay games on facebook and I can't open or respond to my e - but, anyone know wats up?

  Hi Danny

  It is a problem on Facebook. Here are links where you can get help.

  Facebook Help Center | Facebook: http://www.facebook.com/help/

  Facebook Support Forums: http://www.thefacebookforum.net/forum

  Concerning

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034