All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

Similar Questions

• Today, we are locked into sitting and staring at the stupid hourglass or spinning cirlces infinite so that your OS continues to steal the memory and performance

  I just want you know I hate using this operating system. WIN 7 and WIN 8 on different computers. Years ago the opportunity to correct a bit your * but today we are locked in to sit and watch the fool or spinning cirlces infinite hourglass while your OS continues to steal the memory and performance of any type of material that is using your operating system. I can't wait to own a computer that runs an operating system that doesn't degrade not just because I use it for work and play. There is a special place in * for windows programmers and engineers.

  Original title: why windows suck so bad!

  Hello

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  Registry and file locations where applications can configure auto-démarrer parameters.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.

  Help, please

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• Is there a way to select all text objects containing the specified character?

  Is there a way to select all text objects containing the specified character?

  For example,.

  My work consists of points and numbers.

  Points are separated into blocks of text, so are numbers.

  I want to select all points, so I group.

  Or numbers and group together them.

  

  Yes,

  -loop through all the elements of text

  -get each content

  -compare to '. '.

  -If the matching, save a reference to that block of text

  -When does with all frames

  -loop through all stored references and move to a group

• I bought Adobe Acrobat Standard DC.  During the installation, he keeps asking register previous serial number. Any suggestions?

  During the installation, he keeps asking register previous serial number. Any suggestions?

  Hi santiagorfp,

  I checked your account & I see that you have purchased the upgrade to Acrobat Pro DC November 2 & Acrobat Standard DC November 3.

  Update requires the previous version of Acrobat serial key to activate, but the second is a purchase of full application (Acrobat Standard DC), and so it should not ask the serial number recorded previous product.

  Make sure that you enter the series of Acrobat Standard DC key not key upgrade Acrobat Pro DC series.

  Kind regards

  Nicos

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• No wireless access to the printer. Printer attached journal. OfficeJet J6480. Any suggestions?

  The event ID description

  46 69666 firmware Error

  50 69666 firmware Error

  It seems to be a hardware error in the module the printer wireless.  I can find the printer with the full package installer of HP, but the installation fails try to configure the printer.  Printing and scanning doctor could not resolve, then I saw the printer through 192.168.1.124 and got the newspaper.  This problem occurs with all the computers in my house trying to access the printer wireless.  All computers can access the printer using the base driver via shared printing.  All other functions of the printer work fine.  Cannot access wireless computers are:

  Computer: HP Omni 220-1150xt with Windows 7 Home Premium SP1 x 64

  Computer: HP Pavilion dv6700 with Vista Business SP2 x 64

  Hello

  I understand perfectly, but it seems to always be caused by the local envoirnment... any material failureof the printer network card will prevent entirely the printer connected to the network and will not allow you to access the printer and page...

  the steps below refer to the Omni PC...

  Please, try the following steps and let me know any changes:

  First step: reboot the router

  Unplug the router from the power, wait 30 seconds before plugging back power.

  After turning on the router back, leave 2 to 3 minutes until that router will be fully executed.

  Second step: temporary disable Norton Internet Security Firewall (Applicable only for the Omni 220)

  Norton provides security enhanced by its default configuration restrictions, I want to prevent any possible cause

  You can find the steps to disable the firewall below:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=v64908971_NIS_Retail_2012_en_us&product=home&PVID=f-home&version=1&LG=English&CT=us

  Step 3: remove any existing device:

  1. Enter the control panel > devices and printers.
  2. Delete any copies of the printer J6400 series by a right click on it, then click on remove device.
  3. Right-click the background of the display devices and printers area, and then select Device Manager.
  4. Locate and spend the imaging devices category, delete the printer in this category by right-clicking on the name of the printer, and then click on uninstall.
  5. Restart the computer.
  6. Enter the control panel > devices and printers.
  7. Select any available printer by clicking once.
  8. Click the print server properties in the menu bar.
  9. Enter the Ports tab.
  10. Remove any existing printer TCP/IP port.

  Fourth step: Add a new device

  Run the installation of the software and select Add a device.

  Please let me know of any changes,

  Shlomi

• The cursor on my mac pro will not respond to commands to open a page or select anything.  Any suggestions

  I use a Mac Pro and had problems with my cursor does not not at the controls.  I had not updated of Maverick.  I called apple and the first step was to upgrade to El Capitan 10.11.3.  I did this and still have the problem where the cursor will not answer orders intermittently.  It will stop unexpectedly and restart unexpectedly.  Any suggestions?

  Try another mouse/pointing device.

  It works in Mode safe?

  OS x: what is Safe Boot, Safe Mode?

• I can't get my HP Officejet 4300 series printer to print. When I right click, it says 'offline', but it won't let me change it to "in line". "." Any suggestions? Thanks /.

  I can't get my HP Officejet 4300 printer to print.  When I right click, it says 'offline', but it won't let me change to "online".
  Any suggestions?  I feel I have tried everything. What happened in the past, however, if I "right click", I could change to "online".
  but now it won't.  What can I do else?

  Hello

  1. have there been recent changes to the computer before the show?

  Method 1: I suggest to follow the steps provided and check if it helps.

   http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&LC=en&DLC=en#N71

  Method 2: You can also try running the fix it from the link below.

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Hope this information is useful.

• My pc is unable to load the program except in safe mode, which is a recent problem. Time must also be reset whenever I start. any suggestions

  At startup the program do not load beyond the xp logo and then a black screen. The only way to load is in safe mode. The clock needs daily update, is it connected?  I can't restore, but might do at the beginning, but not more. My antivirus is also disabled, it's because its in safe mode. Could all this be reduced to a battery of spleen?

  people suggestions.

  Hi Mike,.

  ·         You did changes to the computer before the show?

  Try the following.

  Method 1: Read the following article.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Method 2: Follow the steps in the article mentioned below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• Using Windows 7. Suddenly in my library of photos I can not open a new folder. Never had this problem before. Any suggestions?

  Suddenly today I'm unable to open a new folder in my library of images.  Also impossible to open a new file in the folder of images on my external hard drive.  Don't know what happened.

  Hello, Edith,.

  You have discovered a problem with Windows 7. To resolve this problem, I recommend a program called FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• do not open Lightroom, photoshop and creative cloud. Impossible to uninstall either. any suggestion?

  do not open Lightroom, photoshop and creative cloud.

  Impossible to install again,

  Impossible to uninstall either. any suggestion?

  uninstall the application of cc, Creative Cloud desktop help | Uninstall the creative desktop application Cloud

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Reinstall the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  and use it to install your ps and lr.

• Newbie question, object remains under all other objects on the layer?

  I am trying to create a logo with a piece of glass and the shadfows. Now there is something funny. On a layer, an object remains in each layer. By dragging it in the layers panel, the object is placed on top. Tried ctrl_x, then ctrl-f, but the rest of the object from all other objects. But in its place on the top panel layer?

  TIA

  check each object and the layer and group: I did and it works as it shoul and black apears on top...

  Check again...

  G

  Also create new layers for each object, and then drag the object (Group) layers of diff.

• AS2 help, moving object to the mouse, click.

  Here is the code that I have, I know that these are the basic elements of wihc I need to use it, they work individually, but together they are not

  on {(press)
  this.startDrag ();
  }
  
  on (release) {}
  stopDrag();
  }
  }

  This += ._y this ._ymouse/4;
  This ._x += this ._xmouse/4;

  
  So what I try to do is to get the object to move more slowly than the mouse, but finish moving all over the place where I let go the click. So far, I can get the object to be moved with the mouse without clicking and dragging at a slow speed, but I can't get the drag to work at a slower speed, he moves as soon as the mouse moves. Can someone help me? Very much appreciated.

  {this.onMouseDown = function ()}

  {this.onEnterFrame = function ()}

  YourObject._x =. 5 * yourobject._x +. 5 * _xmouse;

  YourObject._y =. 5 * yourobject._y +. 5 * _ymouse;

  If (Math.ABS(YourObject._x-_xmouse)<><>

  delete this.onEnterFrame;

  }

  }

  }

• Move the object to the mouse click

  Hi all!
  I'm in a group of study at Aalborg University in Denmark, where we are currently working on a small game Flash, nothing big, nothing fancy, just a part of a small project.
  
  I am currently working to set up one small card game, a card where a character can walk and talk to the NPC and other. We just started to I'm pretty much just working with the basics here. Everything has started to learn AS3 too. I created an object, in this case a circle that gets drawn when I run my code DID, the circle is drawn in the Hugo to my step. What I want, since the game is isometric and moves in these isometric lines rather than upward, downward, to the left, right, I want to do a funktion where, if the mouse is clicked in a place where the X coordinates and are below where is the object, then the object moves to the square.
  
  I hope you can follow me on this point, otherwise, please tell.
  The code I have is for the moment: