all my printouts out of light green color. How can I fix it?

Similar Questions

• I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps from the link below

  http://support.Microsoft.com/kb/299357

• Help! I went during an email to 'junk' and something accidentally and now all my incoming emails went to "undesirable." How can I fix?

  Help!  I went during an email to 'junk' and something accidentally and now all my incoming emails went to "undesirable."  How can I fix?

  OK, each email client has slightly different options.

  In Outlook, the Actions-> Junk Email-> junk e-mail Options, list of blocked senders. Search for wildcards (*) as these can produce strange results.

  Or in the same dialogue, but the 1st Options tab there are 4 radio buttons. If the bottom one is selected only emails from those in your senders list will go to the normal Inbox, so if you have anyone in this list, then, all emails are junk.

• When I click on color chart or color in the upper right corner, it's just in the background color and foreground color, how can I fix it?

  When I click on color chart or color in the upper right corner, it's just in the background color and foreground color, how can I fix it?

  Make sure that the foreground is selected in your color Panel, not the color of background as shown here.

  

• my internet explores all of a sudden stops working then restarts, how can I fix

  I recntly been havig IE suddenly stops working then restarts itself.  My virus scans are clean and I have not downloaded anything new.  Any ideas?  I got 1blue screen with a view of crash dump.

  Hello

  Internet Explorer freezes or crashes
  http://support.Microsoft.com/GP/ie_freezes_or_crashes

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  When you start Internet Explorer, it opens, flashes and then closes immediately
  http://support.Microsoft.com/kb/967896

  ------------------------------------------

  Several troubleshooting methods:

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  For Vista:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------

  For Windows 7:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  I hope this helps.

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• I am trying to print the color of the CS6 PS and it comes out black and white. How can I fix it?

  All other Adobe applications print correctly.

  Check your settings in the printer driver dialog box.

  If you send a color image on a color printer, Photoshop sends color.

  The operating system or the printer driver are the only things that could change the image in black and white.

• Blond hair is originally edges of pixel on the green screen, how can I fix?

  So I get really good with my key skills. Unfortunately in this video here (attached screenshot) can't seem to soften or stifle the blond hair and remove these pixelated edges... I searched all over the web only to find tutorials in After Effects... in any case I can fix this without having to use AE?

  

  Hey Danny,

  Here are pictures of our current set up. I'll upload the video soon as well.

  Thanks for the photos!

  I use a T5i DSLR rebel

  AT ISO 400

  100 shutter

  Opening to 5.0

  An SLR digital H.264 shooting is one of the poorest formats for shooting for the composition of the green screen. Sorry to be the bearer of bad news.

  I would recommend shooting with a camera that can record to a highest intra-image 10 bits of quality, like ProRes format. Many people use less expensive DSLR cameras (like yours) and AJA KiPro or Atomos Ninja HDMI data recorders to get this higher quality videos 10bits, ideal for the entry. They are quite affordable for what they do.

  We ensured that the lights are some 45 degrees angles of tripod of our DSLR, then we have the key "light" following the DSLR. With a transom for product photos and unboxing videos.

  You don't necessarily want ceiling for product, which can introduce hard shadows to talent. Key and fill should take care of most of the product lighting. However, a small 300 watt 'kicker' can be called for these lighting products. You want at least a fire behind the talent (called "Backlight"), which is usually directly behind or slightly eccentric talent. Aim the shoulders and the back of the head by focusing light, then it flood a bit. Adjustment of barn doors to avoid any excess of light entering the camera lens. I have this light almost half to 75 percent of the strength of the fill light.

  See this configuration of Jeff Foster:

  

  The subject is about 2 feet away from the backdrop. (We painted the green wall to reduce to a minimum the tripods and wrinkles.

  

  First of all, in my opinion, that this room is far too small for what you want to do.

  Talent of lighting
  It seems that you are more informed in front. Too fill key and not enough. You don't want three lights, try it with two 45 degree angles. Make sure you use the less powerful light for charging. Add broadcast if the lights are of the same power (which resembles what you have). I find this filling works best when he is about 65-70% as much strength as the key.

  Placement of talent vs the green screen
  I prefer to put at least 10 feet between the talent and the green screen (or bottom of any type) so that you can 'cut' any bright talent of the background and I can fly a backlight behind the talent. Remember you want light talent separately from the green screen. For example, if it was a VFX shot, you wish to turn it on dramatically so that it will blend with the background. In a demonstration of product, of course, it is not as important.

  Green screen lighting
  I can understand why you would want to reduce the installation program by painting the green wall, but I think're missing you an important point. The wall must be turned on too! And quite differently on how you would light of talent. If you need more space for this, as well. He needs to be very evenly lit with zero modeling. I like to use very broad and diffuse sources to that effect. A couple of big lights or soft lights work well for this. Use a directional light meter to make sure that you have all the hot points (see the illustration above for the "lights of the screen").

  You may not space or gear to shoot like you want, but I wanted you to know how I would have turned on this shot. You can do a little more research on how you can configure your studio to get better once you get your shot in Premiere Pro.

  Thank you
  Kevin

• I turned on my computer this evening and all my files are gone. All images, office documents, everything. Then, a low disk space window kept popping up. Is it all the same to recover lost files and how can I fix the disk space is low?

  Please help I don't have the money to have someone come out and look for me.

  Welcome to the Microsoft Answers community.

  System Restore and the temporary files can be placed on your hard drive, but can easily be recovered.

  Try the utility Disk Cleanup to delete files and system restore points that you can safely remove.

  You can start disk cleanup, by doing one of the following:

  • Click Startand then click run. In the Open box, type cleanmgr, and then click OK.

    -or-

  • Click Start, point to programs, point to Accessories, point to System Toolsand then click on Disk Cleanup.

    -or-

  • In Windows Explorer or my computer, right-click the disk in which you want to free up space, click Properties, click the general tab and then click on Disk Cleanup.

  Remove files stored on your hard drive

  To remove files stored on your hard disk that you no longer use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Disk Cleanup tab (if it is not already selected), click to select the check boxes beside the files that you want to remove, and then click OK.
  5. Click Yes to continue it with this action, and then click OK.

  Remove Windows components

  To remove Windows components that you don't use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under Windows components, click clean.

     The Windows Components Wizard starts.

  5. In the components list, clear the check box next to the component you want to remove.
     • A checkbox grayed out next to a component indicates that only some of its subcomponents are installed.

       If you want to remove a subcomponent, click Details, clear the check box next to the subcomponents that you want to remove, and then click OK.

  6. Click Next.
  7. At the end of page Windows Components Wizard, click Finish.
  8. Click OK, click Yes to proceed with this action, and then click OK.

  Remove installed programs

  To remove programs that you no longer use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under installed programs, click clean.

     The dialog box Add / Remove Programs is displayed.

  5. In the currently installed programs list, click the program that you want to remove and then click Remove (or Change/Remove).
  6. If you are prompted to confirm the removal of the program, click Yes.
  7. Repeat step 5 and 6 to delete other programs you use is no longer and then click close.
  8. Click OK, click Yes to proceed with this action, and then click OK.

  Delete restore Points

  To delete all points except the most recent restore restore point, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under System Restore, click clean.
  5. Click Yes to remove all but the last restore point.
  6. Click OK, click Yes to proceed with this action, and then click OK.

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FTP Dreamweaver CC2015 removes all line breaks in the php files. How can I fix this problem?

  When I upload a php file. The ftp transfer removes all line breaks and creates a continuous line of unique text. I need to download the code with all the line breaks in the original php file correctly.

  I found the problem.

  FTP of Dreamweaver CC 2015 program is not compatible with Yosemite 10.10.5 on all ftp servers.

  The new version of FileZilla (v 3.14.0) is also not consistent.

  Fetch 5.7.5 is fully compatible with Yosemite. With Fetch, I can download the files without any problems successfully.

  In their update, Fetch mentioned that the problem is not with all servers.

  I host on Unix servers with HostGator AMD Opteron processors running on an OS GNU/Linux 64 - bit.

  If you run Yosemite and ftp of Dreamweaver is ruin your line breaks, then use Fetch until Adobe can fix their problem.

• When I click on my Office key shortcut in the taskbar it will bring up out of my office. How can I fix?

  I have Windows XP on an Acer Travelmate 230.

  If it used to work, what do you think happened?

  I right click (in the quick launch area) and delete it, the creation of a new sequel to this article:

  http://support.Microsoft.com/kb/190355?WA=wsignin1.0

  As the "Fix it for me" options work rarely, I would choose to fix it yourself.

• When I type on a path type is all capital letters even when traffic is disabled, how can I solve this?

  I work on a personal logo and wanted the guy to follow on the path of a circle. When I type in any character that's all uppercase... Ive checked my character signs and chose the small caps but it always results in all types of plugs. Does anyone know how can I fix?

  N of Tara

  In the character Panel menu > character reset

  or

  Pref. reset may be the best option then.

  Windows: CTRL-SHIFT-ALT immediately after you double-click the PS icon.

  Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.

• How can I fix the system to show red and green colors to customize (you are looking for all colors)?

  Preium Running Windows Vista Home Edition, Service Pack 2.  Currently only display black, white, gray, yellow, blue & Brown under START - control panel - appearance & personalization - customize the colors.  How can I fix system to show "all colors".  Note: This affects all MicroSoft applications as well.

  Hi Martin,

  To provide the proper resolution, I would need more information on your side.

  1. you are trying to change the color of Windows?

  You can read the article and check if it helps.

  Change the colors on your computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/change-the-colors-on-your-computer

  Check out the link for more information.

  Customize your computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/personalizing-your-computer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• I'm trying something in the paint color, but each unique color comes out gray? How can I fix?

  I will be buying leather, and I downloaded a blank form of them and put in paint.  But when I try to color, each color comes out like gray.  My painting is broken, because when I just paint on a white sheet colours are normal.  How can I fix?

  Hello

  1. open Add/Remove Programs
  2. open Add/Remove Windows components
  3. remove paint under the accessories section
  4. repeat the procedure to add it again

  Windows will now uninstall brush. Now, insert your Windows XP CD into the drive and repeat the procedure above, but allow the paint entry in step 4 and click Next. The required files are extracted from the Windows XP CD and paint is now re-installed.