All necessary licenses on ASA 5510 for old Cisco VPN Client

Similar Questions

• How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Dear all

  How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Concerning

  Hi Imran,

  Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

  Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

  Once you create and save this profile. Your FCP file is stored.

  Please assess whether the information provided is useful.

  By

  Knockaert

• Necessary certificate on ASA 5510 for Cisco Secure Desktop?

  I use Cisco Anyconnect "anyconnect-victory - 2.3.0185 - k9" and ASA 8.0.4. I want to just use CSD to prelogin and check a registry key for desktop PC.

  It works fine but I still the newspaper of the SAA this message:

  "Failure of the validation of certificates. No appropriate trustpoints found to validate the serial number of certificate: xxxxxxxxxxxxx, name of the object: cn = CiscoSecureDesktop.

  January 5, 2009 15:00:50: % ASA-3-717027: invalid certificate chain. No appropriate trustpoint was found to validate the string. »

  I need to install a certificate on ASA just to use the CSD module? Or, what is the average to avoid this log message and use a certificate of CSD?

  Thanks for your help.

  David.

  Hi David,

  The question is more aesthetic and does not affect all the features.

  You can view the bug "CSCsr07594", which describes the problem and the workaround in detail.

  Thank you

  Naman

• Cisco VPN Client and Windows XP VPN Client IPSec to ASA

  I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

  PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

  Config is:

  !

  interface GigabitEthernet0/2.30

  Description remote access

  VLAN 30

  nameif remote access

  security-level 0

  IP 85.*. *. 1 255.255.255.0

  !

  access-list 110 scope ip allow a whole

  NAT list extended access permit tcp any host 10.254.17.10 eq ssh

  NAT list extended access permit tcp any host 10.254.17.26 eq ssh

  access-list extended ip allowed any one sheep

  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

  tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

  flow-export destination inside-Bct 192.168.1.27 9996

  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

  ARP timeout 14400

  global (outside-Baku) 1 interface

  global (outside-Ganja) interface 2

  NAT (inside-Bct) 0 access-list sheep-vpn

  NAT (inside-Bct) 1 access list nat

  NAT (inside-Bct) 2-nat-ganja access list

  Access-group rdp on interface outside-Ganja

  !

  Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

  dynamic-access-policy-registration DfltAccessPolicy

  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

  Crypto ipsec transform-set newset aes - esp esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

  Crypto ipsec transform-set vpnclienttrans transport mode

  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

  life crypto ipsec security association seconds 214748364

  Crypto ipsec kilobytes of life security-association 214748364

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

  card crypto interface for remote access vpnclientmap

  crypto isakmp identity address

  ISAKMP crypto enable vpntest

  ISAKMP crypto enable outside-Baku

  ISAKMP crypto enable outside-Ganja

  crypto ISAKMP enable remote access

  ISAKMP crypto enable Interior-Bct

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  No vpn-addr-assign aaa

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.192 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside Baku

  SSH 10.254.17.18 255.255.255.255 outside Baku

  SSH 10.254.17.10 255.255.255.255 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside-Ganja

  SSH 10.254.17.18 255.255.255.255 outside-Ganja

  SSH 10.254.17.10 255.255.255.255 outside-Ganja

  SSH 192.168.1.0 255.255.255.192 Interior-Bct

  internal vpn group policy

  attributes of vpn group policy

  value of DNS-server 192.168.1.3

  Protocol-tunnel-VPN IPSec l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  BCT.AZ value by default-field

  attributes global-tunnel-group DefaultRAGroup

  raccess address pool

  Group-RADIUS authentication server

  Group Policy - by default-vpn

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  Hello

  For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

  Please see configuration below:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  or

  http://tinyurl.com/5t67hd

  Please see the section of tunnel-group config of the SAA.

  There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

  So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

  Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

  "crypto isakmp nat-traversal.

  Thirdly, change the transformation of the value

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  Let me know the result.

  Thank you

  Gilbert

• Configuration of Cisco for Cisco VPN Client ASA 5505

  Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

  When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

  There step by step guides to create the connection profile file to distribute to customers?

  Hello

  The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

  You will need to set the same in the client, so that they can negotiate and connect.

  Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

  Host will be the external ip address of the ASA.

  Group options:

  name - same tunnel as defined on the ASA group
  Password - pre-shared as on ASA.

  Confirm password - same pre-shared key.

  Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

  You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

  Kind regards

  Anisha

• Cisco VPN client (ASA) password expiry messages

  Hi all

  I am looking for a way to change the message displayed on the Cisco VPN client, when a password change is required. This configuration uses an ASA 5520 with Windows 2003 IAS radius for authentication server.

  I have configured the option 'password-management' under the tunnel-group, but when the password expires the vpn client prompts you to "enter a new pin code.

  This customizable message, for example "Please enter a new password to 8 characters etc.

  The original message communicates enough information for the user.

  Thank you

  Hi Matt,

  This is a known defect CSCeh13180 (when using RADIUS with expiry) and there is currently no plan to fix this bug.

  But you can try this for one of your VPN client and see if that helps.

  you need to change the VPNClient.ini on the PC that installed the VPN Client. Here are the settings you will need...

  [RadiusSDI]

  NewPinSubStr = "" enter the new password: ""

  HTH

  Kind regards

  JK

• Cisco VPN client 3.5.1 and Cisco ASA 5.2 (2)

  Hello

  I have a strange problem about Cisco VPN client (IPSec) with Cisco ASA. The Cisco ASA runs software version 5.2 (2). The Cisco VPN client version is 3.5.1.

  The problem is the customer able Cisco VPN to authenticate successfully with Cisco ASA, but could not PING to any LAN behind the Cisco ASA. In any case, the problem disappeared when we used the Cisco VPN version 4.6 or 4.8 of the customer. All parameters are exactly the same. What has happened? What is the cause of this problem? How can I solve this problem?

  Please advice.

  Thank you

  Nitass

  I understand your problem, I never used 3.5.1 so I thought that maybe nat - t is not enabled by default as 4.x.

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• connect Cisco VPN client v5 to asa 5505

  I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.

  Cannot ping asa 5505

  Any ideas on what I missed?

  Try adding...

  ISAKMP nat-traversal crypto

  In addition, you cannot ping the inside interface of the ASA vpn without this command...

  management-access inside

  Please evaluate the useful messages.

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• Cisco ASA 5510 multiple dynamic config VPN L2L necessary

  Hello

  We have a Cisco asa 5510 with static IP address. Also, we have a remote office with a dynamic IP address. We now have a dynamic to static VPN configured L2L. And now, we must add new tunnel to another site with a dynamic IP address. Is this possible? Does anyone have an example of woking, or manual?

  Oleg Kobelev

  The config only you need in the ASA is: -.

  (1) set of crypto processing

  (2) political ISAKMP

  (3) dynamic Crypto map

  (4) default group L2L & PSK

  (5) Config RRI (reverse Route Injection)

  HTH >

• ASA 5505 and ASA 5510 Site to Site VPN Tunnel cannot be established

  Hi all experts

  We are now plan to form an IPSec VPN tunnel from site to site between ASA 5505 (ASA Version 8.4) and ASA 5510 (ASA Version 8.0) but failed, would you please show me how to establish? A reference guide?

  I got error syslog 713902 and 713903, how to fix?

  I got the following, when I type "sh crypto isakmp his."

  Type: user role: initiator

  Generate a new key: no State: MM_WAIT_MSG2

  Hugo

  Hello

  This State is reached when the policies of the phase 1 do not correspond to the two ends.

  Please confirm that you have the same settings of phase 1 on both sides with the following commands:

  See the isakmp crypto race

  See the race ikev1 crypto

  Also make sure that port UDP 500 and 4500 are open for communication between your device and the remote peer.

  Finally, make sure you have a route suitable for the remote VPN endpoint device.

  Hope that helps.

  Kind regards

  Dinesh Moudgil

• ASA allows 1 only RAS VPN Client IPSEC

  Hi all

  I have a strange problem where an ASA 5510 configured for IPSEC - over - udp VPN RAS allows only one 1 customer vpn traffic through.

  Other clients can connect successfully (obtain IP/DNS etc., auth using LDAP) but only the all connected client is first able to browse internal resources. Others show 0 decrypted packets when I check the statistics. I have confirmed that it is not a problem with the license that the ipsec default license allows customers up to 250 I believe. Does anyone had this problem in the past?

  TKS,

  Donavan

  It is usually a problem with the translations, which intervened on the NAT/PAT device in front of these multiple machines:

  http://www.ciscotaccc.com/Kaidara-Advisor/security/showcase?case=K71102938

  Check the translations look correct initially on this device. There should be a translation for each VPN.

  There were also a few bugs on multiple clients behind the same PAT, such as CSCse03299, but these had to do with IPSec over TCP connections.

  -heather

• CISCO ASA 5505 no cisco VPN Client

  Hello

  I'm looking for after a firewall Cisco ASA 5505 and want to watch all the owners of it with remote access in but none of us have a support contract with Cisco.

  Is it possible to set up a VPN client not as Microsoft built the client to connect to the ASA?

  Thank you

  Alamb200

  Hello

  Looking for a PPTP on ASA connection?

  The following document provides the following:

  ASA q support PPTP client?

  A. number of the

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_qanda_item09186a00805b87d8.shtml#supportfeat

  But we can configure ASA to allow the PPTP connection:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your request is answered. Note the useful messages.

• Record of equipment for the Cisco AnyConnect client NAM module

  Hi all

  Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)

  Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?

  Where can I find what wifi chipset is compatible with?

  Thanks in advance for your answer.

  Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.