All of a sudden my system aero theme does not work!

Similar Questions

• all of a sudden the audio to youtube does not work? OK but in IE

  all of a sudden when I play a YouTube video of the audio does not work. Works fine in Internet Explorer.

  Did you also check the plugin-container parameter in the Volume mixer?

  You will see Firefox or plugin-container in the mixer volume if you're on a Web site that is running a media (audio) file.

  See also:

  • https://support.Mozilla.com/kb/no+sound+in+Firefox

• All of a sudden my keyboard tab key does not work in Firefox 20. What might this disables?

  What information do you want?

  Have you tried to close and restart Firefox or restart the computer?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• cooling fan (fan system 90 b) does not work

  cooling fan (fan system 90 b) does not work for my laptop of 2229 you pavilion g6, my warranty period is not over, what is now a solution for this?

  Try a hard reset as follows:
  
  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button
  
  Please post here your positives or negatives in your thread. If that does not improve the situation, thencontact HPfor warranty repair service for your laptop.

  Troubleshooting here

• my work of collapsed app coil system, help printer does not work

  my work of collapsed app coil system, help printer does not work

  Hello

  1. What is the brand and model of the printer?

  2. do you have an error message when you try to print?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps suggested by chan seen from the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  Hope this information helps.

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• Problem of Pavilion dv67023tx, drive damaged, recovery system recovery cd does not work

  Hi all! I really need help

  I bought my computer hp laptop Pavilion dv67023tx July 2012.  When I bought it, they gave me a set of recovery disks. January 2013, I did a system restore. It was fine then.

  Later, after some software hp update my cd player began to eject automatically. The light of the hp on the lid logo disappeared also. My audio jack went wrong from the beginning. So for all these problems together, I took it to the service center, and as it was in warranty period, they sent to hp. 3 months later I have my laptop back, I was informed that hp has changed the hard drive, motherboard, cover, screen.

  There is a month Itried to install some of my software I used earlier, but they were not working. If I had no other way than a system recovery using this link

  http://support.HP.com/us-en/document/c01867418

  Then the main problem occurred. I couldn't do a system recovery from disk on my laptop. Then when I tried to do the recovery disks and he says, the system recovery disks do not support this computer. You are not able to restore this system with these discs.

  http://support.HP.com/us-en/document/c01868346

  This link said, maybe its because hp has changed the motherboard.

  Now what should I do? I need a factory. But recovery in my laptop drive does not work, my recovery disks do not work. Please help me out of this. Or give me email ID so I can contact HP directly with problems, I do not find anything.

  Others suggesting me to install a pirated Windows 7, I don't want it. I had a real windows 7 pre installed, why should I?

  I'm sorry but I can't help you with recovery disks not working is not on your computer, but I don't have an alternative. If you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Premium using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

  Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

  There are Windows 7 drivers here...

  http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

  Have you tried?

  Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

• Of Windows Aero theme does not

  I know there are a lot of other posts on this subject online, but their solutions have yet to help me.  My windows Aero theme has suddenly stopped working.  I ran the store and he tells me that it is a problem of graphics, but I can still run games like 2 Troubleshooting and Minecraft very well.  I have a laptop HP Pavilion dv6 with an AMD Radeon HD 7600 M Series and AMD Radeon HD 7640 G + double HD 7600 M graphics card.  I also tried uninstalling and then reinstalling the drivers for the cards, but without success.  If there is anything else I can try, please let me know.  Thanks for the help.

  Thank you very much for the help.  I will try your solution, but my windows eventually break I guess.  I decided just to format the hard drive and reinstall windows because it wouldn't start even in the first place.  Everything works fine now, but.  Thanks for the help.  If the problem happens again, I know where to go for help!

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• tried system restore it does not work

  I tried the system restore is not working I remember there's long internal an d seting a time you wanted the system restarted from. a couple of days or weeks all it worked. everything back to the way it was on the set date in plezzzzzzzzzzzzzzzz help oy

  Try to do in Mode without failure.

  How to go in safe mode...
  Restart the computer > immediately and repeatedly tapping the F8 key until you see a black and white screen > use the up/down arrow and scroll to select Sfae Mode.

  Tutorial to make the system restore...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• BlackBerry smartphones HELP! I lost all my application icons and the menu button does not work!

  I don't know what I did.  All the application icons are moved from the home page.   The menu button does nothing. The trackball does not have anthing. The only thing on the screen is the time, date, battery, new mail envelope, signal and volume. I pulled the battery and it has no effect. I don't know what to do. Help!

  Hey, JSammy.  I had mine works again with the help of someone from another site.  Here's what you need to do: press the green call button, then the menu button.  Select options, then on options General, highlight "dial from homescreen" and the value. Save and exit. Now on your home screen, press "O".  After that, the General menu options will come.  Choose the option 'theme' and choose a different theme or return to the default value.  This should be all your application icons to reappear.  After doing all this make sure you go back to reset the "dial" since the homescreen on 'yes '.  I hope it works for you.