All of a sudden my system became very slow and duration start increases 15-20 min.

Similar Questions

• iMac became very slow and unresponsive

  Hello

  I have an iMac which, in the last two days, suddenly became unusably slow. Almost every click brings up the spinning beachball even just after a reboot. iTunes cannot play a melody without pausing every minute or two. Same Safari is really slow, so I have still not tried more demanding such as Lightroom.

  Its an iMac mid 2010, 8 GB RAM, 1 TB HD with 305 GB free. Im running El captain, 10.11.6

  Any ideas what could be causing this or what I could do to remedy the situation? IM thinking I have to go through the pain of wiping the hard drive and reinstall everything. But I'd really rather avoid because I was planning on getting a new iMac when they release then them and I don't want to go through all that process again.

  I hope someone has an idea of something I could try before doing this?

  Thank you.

  Andy

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• my computer became very slow, but it shows no virus. Videos don't is not good and updated loading in service is very slow?

  My computer became very slow and takes forever to start up. I ran a diognostic on it and he registered all those sites that open at startup, but I don't know which I need and those who didn't. In addition, do not load my videos, they stop and start!

  Hello

  1 are there any changes made recently to the computer?

  2. What is the security software installed on the computer?

  3. What are the steps that you have already tried?

  Follow the steps in this article.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  I hope this helps.

• Since Firefox 13.0.1 my scrolling speed is very slow and lazy. Disabled all the plugins still don't work. Any difficulty? I HATE IT!

  As soon as Firefox when through it's automatic 'upgrade' the scrolling action became very slow and lazy. I tried all this suggested (disable plug-ins, re-installing Firefox, restart the computer, etc.), but I still can't get back to the way it was. Is there a fix, or how can I re - install the older version that worked so well? I HATE THIS!

  Hello mjg263, firefox 13 introduced a scroll smoothly by default - it might not work well on older hardware.

  Please, try to update your video driver or if this does not improve the case you can disable scrolling smoothly in firefox/tools > options > advanced > general.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• All of a sudden my system aero theme does not work!

  All of a sudden my system aero theme does not work! Before that it worked. But it doesn't now. What should do?

  Original title: aero theme!

  Open the Aero Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, typeTroubleshooter, click on resolution of problems and then, under appearance and personalization, click Display Aero desktop effects.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• All of a sudden I've locked the folders and files on my system. How to unlock the files?

  I'm as Windows 7 Home Premium 32-bit slot. All of a sudden I've locked the folders and files on my system. I am the administrator and the only user of my computer. What happened to cause this? How to unlock the files?

  I right click on them and there is no label of 'ownership '.

  Angi

  Hello

  ·          How do you lock the folders?

  ·          The question came with all the files and folders?

  Step 1: Here's how you can take ownership of the files/folders

  a. right click on the file or folder and then click Properties.

  b. click the Security tab.

  c. click on a user name or group under group or user names.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  Step 2: Run the fix it to http://support.microsoft.com/mats/windows_file_and_folder_diag/

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mac became very slow viruses

  Top of desktop Mac became very slow all of a sudden. Could there be any virus. How do I solve the problem

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• my 27 Imac late 2009 became very slow

  My 27 Imac late 2009 became very slow - I think especially after I've upgraded to El Capitan. Otherwise, everything in the computer works perfectly and I m using only 200 I have the 1 TB. Onyx and other tests can't find anything wrong. I mainly use my computer for word documents and to manage his photos about 30 000. The internal memory is 2 x 2 GB. Does anyone have any suggestions of what I could do to speed it up? Thank you.

  I wish I had an answer, but all I can do is rather echo to your problem. I have a 19 mid-2007 "iMac, contributed to the maximum with the RAM, 1 t disc hard less that half full, who did the same thing - he has worked with El Capitan until I updated to the latest version. Once that has happened the machine became so slow as to be unusable. It would take ten or twelve minutes to record a mouse click. When I restarted the machine, it took 32 HOURS to start (Fortunately it isn't my main Mac production).

  Last week, I tried all the remedies of common sense - by removing unused software, keeping an eye on the activity monitor (there is nothing fancy here), etc. Finally, I did all the stuff start, PRAM, run utilities disk (no noted problem) and even tried to reinstall El Capitan to a bootable USB I did with my first Mac, the reinstall, but seemed not 'take' somehow - he wanted to repeat the installation procedure again and again.

  I use the little Mac for Internet, e-mail and (as Karlis2) deal with some of the oldest pictures in my files - I'm sure that I have pictures on Time Machine, so I'm not too worried about it, but this was the first Mac way back in the day, I bought with my money and I'm a little sentimental on and would like to resurrect if possible... I wonder if there is a way to restore the operating system to an earlier version and it would make a difference?

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• The machine is very very slow and constantly beach balls, System wiped 3 times by Apple store

  I have a 27 June 2015 iMac 5 k, 3rd two precedents as a failing. I upgraded to 24 GB of RAM and use PS CC, Lightroom with two plug-ins software nick Imagenomics.

  the machine is very very slow and beac balls constantly...

  Sometimes, I visited pirate bay re music but all f my software is legitimate...

  I have taken e machine to my local application, e store twice, claiming the material is good, but the software is obviously not correct that they admit that it's very slow, so they wipe the machine and system restore...

  sound she's like going round a roundabout...

  Help

  So, what operating system Mac are you on? You are not running an iMac on iOS.

  The Apple store actually erase your entire hard drive or they just install the OS on top of what you have?

  If you downloaded from any type of torrent/pirate bay Web site, there are some that will include a few unwanted songs (like bloatware/adware/malware) with their free software, especially if this software costs money elsewhere - for example, you might have installed something that will not be fixed by installation of operating system unless all of the hard disk will be deleted first. You can view the results after you run this small diagnostic tool of one of our employees of Developer:

  http://www.etresoft.com/etrecheck

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796

• Satellite Pro M10 suddenly ran very slow and freezes

  Two weeks ago, that my SP M10 is suddenly very slow and freeze. After a reset, it began to check the HARD drive, which lasted about 8 hours, and several repair lost clusters to files. But the student pilot did not run faster. I reformatted the HDD to FAT32 (NTFS has not worked) and reinstalled Windows XP. First, it seemed to work very well, but a few hours later, it freezes again.

  After 10-20 min, I got access. This has not changed so far. CHKDSK another also lasted several hours and again showed some lost clusters. I think that my HARD drive is damaged, but how can I see if there a lot of bad sectors? Can I fix it? Can I possibly replace my 40 GB HARD drive with a larger HARD drive capacity?

  Are there restrictions or can I use any brand?

  Hello

  I had the same problem with my Satellite 1900. The result was the HARD drive damaged (bad sectors). I tried to fix it with different tools, but without success. The best solution is to swap the HARD drive.

  Good bye

• Failed to create the restore point and system runs very slow

  Original title: date of restoration

  An automatic download occurred.  System is very slow.  Runs in safe mode.  No date of restoration can not enter in safe mode, time in normal mode.  Cannot run the system restore.

  Hi Jim,

  1. you did it any recent hardware or changes to software on your computer before this problem?
  2. the automatic download is produced through Windows update or any application?

  3. What do you mean by "is running in safe mode. No date of restoration can not enter in safe mode, time in normal mode. Cannot run the system restore'?

  4. what happens when you try to start in Normal mode?

  5. what happens when you try to perform the system restore?

  6. do you get an error message or error code?

  
  Please follow the links:
   
  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

   
  How to resolve performance issues during startup in Windows Vista

  http://support.Microsoft.com/kb/950684