All the data disappeared after the installation of updates! Help!

Similar Questions

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install Trend Micro 2012, receive error message: "your computer meets all the installation requirements, so Setup must stop."

  Original title: Problems installing Trend Micro 2012

  Tried to install Trend micro on my laptop, and towards the end of this way the message; "Your computer meets all the installation requirements, so the installer must stop." appeared. He then read "Windows update," I clicked on the link and also called microsoft who gave me the link updates from SP1 to SP2. I did (ran for almost 2 hours!) and recorded. I then checked the edition of windows under system and it has not saved the update even if it is registered and installed to my files. Tried to do the foregoing twice, still the same problem. Rang Dell and they sought to find an answer to the problem, but did everything they could. Still no answer to the problem after all. I have Windows Vista Home Basic as my operating system and installed Trend micro in the past with no problems. (Not sure if the following has nothing to do with it, but thought it might be useful a mention). I changed to Microsoft Office 2007, which has already been installed on my laptop for Office 2003, because I found it difficult from the laptop to the desktop and I didn't really want to pay for the upgrade of my office, if I didn't need it.

  Hello

  You need to install Trend Micro Titanium 2012 Vista SP2 or later version

  See this: http://support.antivirus.co.UK/trendmicro/kbresolution.jsp?Hmid=53756&ServiceId=51&ApplicationId=345

  I suggest you follow these methods and check.

  Determine if SP2 has been installed or not?

  To see if the update has been installed, review the installation history

  To view the history of installation, follow these steps:

  a. click Start, point to all programsand then click Windows Update or Microsoft Update.

  b. click view update history.

  c. find the latest entry for the specific update.

  d. If the entry shows the success in the status column, the update has been installed. If it says pending in the status column, the update is not installed.

  Post back with the history state of Windows update, mistakes, if there is.

  If the update is successful, if it does not show in system properties run System File Checker tool.

  To do this, follow the steps in this link:

  Follow the steps in this link: http://support.Microsoft.com/kb/929833

  In the meantime, you can check this link for the required components, that you must take to install the Vista SP2. Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/is-is/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Also these return these items:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.microsoft.com/kb/2438651

  I hope this helps!

• BlackBerry Z3, I lost all my data on my SD storage card, please help me to retrieve the data.

  Dear Sir.

  I lost all my data on my SD storage card, please help me to retrieve the data. I have a Z3, just bought only a week before, I removed the card with the phone off and then give the card again and noticed that I lost all the data. Please help

  Try restarting your phone. Sometimes it shows data that brought them "disappeared". To do this, hold down your power button for about 15 seconds, until you see BlackBerry on your screen. Do not release the button until you see that without taking account of any other thing you see before that.

  Try this and post back with your results.

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• The following updates 5 will be "installed successfully" but reappear on loans for the installation of all the days of updates: kb2600217, kb2533525, Ko 2468871, KB2656351, KB87367.

  Hey all,.

  The following updates 5 will be "installed successfully" but reappear on loans for the installation of all the days of updates: KB2600217, KB2533525, KB2468871, KB2656351 and KB87367. Any advice on how to fix this?

  TIP: See the first, 4 specific sub-section of .NET Framework of the method of resolution 2 (only!) on this page-online http://support.microsoft.com/kb/976982

• Windows 7 pro 64 hangs up on the installer is updated to display registry settings

  Windows 7 pro 64 hangs up on the installer is updated to display registry settings.  It will sit there for hours and doing nothing. Hard drive seems to click from time to time.  New drive in a new i7 system.

  If the problem persists, try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

  Note: The drivers on the Windows Update site is directly provided by equipment manufacturers. Microsoft tests drivers in various environments prior to publication; However, we cannot guarantee that all the drivers work on all hardware platforms as there are too many different models, although their hardware IDS are the same as the standard version. In some cases, due to changes in the material by different manufacturers, updates of the driver can cause an error.

  If this does not work on your question, I suggest you install the Vista driver in compatibility mode. Remove and rescan the device in the device, right click on the executable/installer file manager driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• update problem failure in the installation of updates to restore changes

  I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'

  Help, please.

  Thank you.

  Hi Manish,

  This problem may occur if Windows updates are not getting not properly installed or damaged.

  I suggest you try the steps from the following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  
  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• Since the installation of update of firefox I have more a padlock displayed when on secure sites. Is it still OK?

  Since the installation of update of Firefox today, 11/11/2011, when incoming secure web sites I no longer have the display of a padlock. I still have Https. I wonder if the security of these barns is still OK.

  The status bar is gone and the 'blocking' with it from Firefox 4.0. Safety information on a web page are shown by the Site identity button.
  
  The former lock could give users a false sense that a site is safe to not to provide information to the site and showed that there is a secure connection that does not guarantee that you are connected to the right server. The Site identity button is introduced in Firefox 3.0 to show more complete information of 'identity' for HTTPS web pages.
  
  https://support.Mozilla.com/en-us/KB/site+identity+button

  You can add a padlock in the address bar with the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PROBLEM WITH THE INSTALLATION OF UPDATES

  When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few minutes start computer & it starts normally & then it finish installing updates.  My question is what could cause the problem?  I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.

  I would like to know what else could be the cause of the problems and what I could try to fix it?

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)

• Creative cloud claims all the apps are updated when they are not

  Hello

  I have a subscription to creative cloud and use applications on two different computers W7 64-bit. On one of the computers - creative cloud shows notifications on apdates and I am able to install these. On the other computer, however, it is said that all the applications are updated. In individual applications - the menu updates option is grayed out.

  I'm connected with my accound and I can install applications. However-, it does not seem to install the latest version of the most recent. Tried to uninstall and reinstall Photoshop CC today (10 MS) and got the version 14.0 20130423.r.221. On my other computer - it updated to 14.1.

  No error message whatsoever - it simply asserts that everything is already updated.

  Thanks for all the suggestions

  Hi Tomas614,

  Could you please try to uninstall and reinstall Office CC applications. Once please check if you are able to download and to install the updates or not.

  If the steps mentioned above does not work then please uninstall the Applications of CC and remove Adobe files in these locations.

  Windows:

  C:\Program Files (x 86) \Common Files

  C:\Program Files (x 86)

  C:\Users\(your username) \AppData\Local.

  Reinstall all the apps again and try to update.

  It will be useful.

  Kind regards

  Abhijit

• All the pictures and videos stored on the previous deskmanager Blackberry phones smart blackBerry disappeared after I have accept updates

  I'd appreciate any advice really - when I was accessing my media on my blackberry Desktop Manager Manager I've been invited to accept updates that I did - it seems to have downloaded a new blackberry desktop and I lost all the photos and vids I stocked up on previous - such a freak out as about 3 years worth of travel and pictures of the family and of the videos stored in my manager of blackberry desktop software

  Appreciate any help thanks

  Anything sync'd through your BDS is stored in a folder somewhere... usually My Documents > my pictures > BlackBerry (or my videos > BlackBerry). It depends on the path specified for the folder when you set up the synchronization of the image.