All the solutions for a continuosly flashing "taskeng.exe" popup?

A black box appears constantly and come out on the screen. The title bar of the popup says "taskeng.exe. Running under Vista 64-bit...

Hello

 
 
Did you of recent changes made to your computer before the show?

This is the Windows Vista Task Scheduler service. He is responsible for the follow-up of tasks to run at a time predetermined by the user and to invoke when necessary.
Note: The taskeng.exe file is located in the folder C:\Windows\System32. This service can sometimes become infected.
Follow these methods mentioned below and check if that helps:
Method 1:
Step 1:
check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If it works fine in safe mode, then follow this KB article to perform the clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
WARNING: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.
Method 2: I also suggest you to download and run the last Security Scanner Microsoft on your computer scan that the issue could have been caused by infections.

http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Before performing safety analysis make a backup of important data.
 
 
 
 

Tags: Windows

Similar Questions

  • In use, IE. even when playing a windows game will enter the power saving mode. All the solutions for this?

    It was produced for about 1 month without no reason that I can find.

    Hello Keir,

    Follow the following steps:

    1 plug in your power supply. Click on "Start" on your computer screen, then click on 'control panel '.

    2. double-click on the "System management" link and click on "Power Options."

    3. Select 'High Performance' under the power plan window. Click 'OK' to save the changes. This will disable sleep mode auto power saving.

  • Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

    Whe trying to update ios to ios 9.3 9.2.1 come error 3194 give me the solution for all I phone and ipads

    Try some suggestions here: If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support

  • Adobe Edge animate is suitable for long animations? Can I convert a Flash file in a file of edge animate, or somehow reuse all the work already done in Flash?

    I created a Flash of 4 minutes, and for the life of me, I can't allow it to play smoothly without glitches and jerks in the query.

    Edge animate will produce the same effects on slower PCs and those with less RAM, slower processors?

    Can I convert a Flash file in a file of edge animate, or somehow reuse all the work already done in Flash?

    Thank you

    Marshall Gisser

    Hi Marshall

    One of the ways to have your work exported to animate dashboard is by exporting under sprite sheet. You can use this option to flash pro and import them into Edge animate.

    Thank you

    Dieudonné

  • I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

    Hi guys,.

    IM pretty happy problem because I found the solution for my tx 1219 us wireless!

    First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

    I read a lot of posts on forums that talking about changing the motherboard by HP.

    I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

    I was paying, so I pretend a new.

    Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

    I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

    Here's the method. Feel happy!

    This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
    Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

    The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
    HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

    Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

    step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

    Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

    Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

    It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

    Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

    Greetings

    Message edited by Wendy on 30/04/2009 21:02

    Please see the procedure on YouTube

    http://www.YouTube.com/watch?v=musu759LsT4

    Message edited by Wendy on 30/04/2009 21:02

  • Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

    Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

    Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

    Help, please.

    Hello

    I suggest you to ask your question at the following link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

    I would also ask you to contact your IT Department for further explanations.

    I hope this helps.

  • MS, what IS the solution for the ERROR CODE of 0 x 80240437?

    Looks to me like PERSON DON'T know what the solution to the problem is YET many people say online the fault lies with the last update from Ms.

    I just got a NEW laptop Gateway (NE56R41u) and it comes with bloatware to/from Windows 8.  The store said I need to 21 updates, yet all say that it cannot load due to this error code.
    So if nobody seems to have a solution, should I just sit and fiddle while Rome burns?  My solution is to delete everything that needs updates for and find one comparable application/software other than comparable MS/MS.  To see all the complaints and problems that have been created by the said error tells me that maybe there is no control of the quality at the top when it comes to release updates or solve the error in a timely customs codes.  Some of us have businesses where these codes are an obstacle, perhaps even bad, but no one knows what to do.
    If there is an answer, of course, I'm going to see/read the solution for it.  I'll even write back and say "Alright, it works now!
    I will say that States out constantly updates without checking and adding more noise to its 'small box only enlarges the problem... ".
    It is MY FIRST point in this place and I am disappointed... later, people!

    method 2 worked for me. Thank you very much! Very grateful!

  • Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

    Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

    Please make sure that you gave permission for the folders listed in the article, follow these steps.

    1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

    2 - Add user and admin both permissions.

    When you open the Get Info option for specific folder.

    Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

    Both must have read and write to prevent access these some questions in the future.

    Important:

    Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

    Make sure you click on the gear icon and select apply to closed.

    Lock dialog box and close the Get Info .

    So that all the folders in the folder Adobe will get read and write access.

    Let us know if this helps

    ~ Assani

  • Adobe Reader has stopped working, all the solutions?

    I'm having a problem with Adobe reader X.

    I open the program and it works normally, nothing to report.

    Whenever I close the program I get the error message "Adobe Reader has stopped working)

    I'm on Win 7 (32-bit) SP1

    all ideas/solutions for this situation?

    Thanks in advance

    It worked for me on Win7 Pro 64-bit:

    Open Adobe Reader X (10.1.1)

    Edit... Preferences... General...

    Uncheck 'enable protected startup mode '.

    Close and restart.

    I use Symantec AV, I can easily believe it's an irritating inconsistency between what Adobe is trying to do and what Symantec is trying to do.

  • CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

    CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

    Try creating a new profile as a test to check whether your profile is the source of the problems.

    See "basic troubleshooting: a new profile:

    There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

    If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

    See:

  • I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

    I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

    Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

    In addition, you can try to reset your settings.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

  • Where can I find all the drivers for Tecra 8200

    Where can I find all the drivers for a Toshiba tecra 8200 PIII750/20/14 t/D/LM/W - I searched for drivers (all drivers) this Labtop can enyone please help me :)

    Got Windows XP:

    Post edited by: Rullings

    Hello

    Have you checked the European driver Toshiba page?
    This site contains all the necessary drivers for Win95, Win98, Win98SE, Win XP, ME, W2k.

    Only Vista drivers are not available for this oldie

    Check it!

  • I found the solution for the problem of sound-acpi with Satellite P100-219

    Hello

    I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

    See you soon,.
    MIK

    Hi Mik

    As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

  • 152TX HP - AC: I need all the drivers for my laptop hp 8.1 windows

    Hi guys,.

    Can some1 please help me get all the drivers for my system. I installed windows 8.1 in my laptop.

    Thank you!

    Kind regards

    Prashant

    Hello:

    You should be able to use the W8.1 drivers and software ac000-15 t on your model, except the BIOS and firmware files.

    http://support.HP.com/us-en/drivers/selfservice/HP-15-ac000-notebook-PC-series/7771404/model/8381866

    Using the latest graphics driver Intel appearing... sp72651

    Use the Realtek drivers wireless and bluetooth.

  • All the driver for Hp Pavilion 15 - n213sx windows 7 & 8.1

    Please all the driver for Hp Pavilion 15 - n213sx windows 7 & 8.1

    HP provides a limited number of drivers for Windows 7 and the complete assortment of Windows 8.1 drivers on the page of drivers PC laptop HP Pavilion 15-n213sx.

    Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

Maybe you are looking for

  • Can I sync 2 iphones feculence 1 Apple Watch?

    Good afternoon I have a Apple Watch series 1 and now 2 iphones 1 work, 1 staff. The phone is currently set to synchronize with the phone. Can I use this same watch to set up and synchronize with my IPhone to work? I can't wait to hear a comment. Kind

  • HP Photosmart Premium C309g-m: HP Solution Center does not work

    Improved win7 to Win10 House and it worked all fine until a few weeks ago.  Now when I open the HP Solution Center, the drive vibrates for a while, I see HPqdirec.exe (32 bit) process for a second in the Task Manager (not all the time but that could

  • Switch time delay between 3 and back!

    Hello I'm trying to figure out how can I switch between three cases in a case structure for a while between each switch. For example: I have three cases in a structure of case (case) {0,1,2} where zero is the default case. What I want to do is to sta

  • Drag and Drop Hide Source of success

    Hi, I created a multiple source target Drag and Drop Interaction.It works great except for advanced behavior, I want to take place.I want to give the impression that my source objects 'disappear' (hide) after I drag them successfully to the right tar

  • Cannot create the vCloud Director VDC

    Hi allNeed help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.Note: My setup d