All the sounds of my event disappeared and have been replaced by a beep loud. Impossible to control via Control Panel.

My sounds don't work anymore and the only noise I still is a strong signal. The sound is still very well when I play DVD, etc. I can't fix the sounds via Control Panel - I reapplied the sounds of Windows by default, but the problem persists. In addition, the beep does not disappear when I choose No. sounds or turn off the sound.
This could be a coincidence, but this problem started when I tried to update AdAware and had an error of update that resulted in an error message reappears frequently interfered with Windows startup. I uninstalled AdAware and no longer see the error message, but still the beep.
Thank you in advance for your help!

Hello Ecate,

Thank you for your message.  Take a look at the link below.  The beep question may just be the substitution of sounds of your system.
Please let us know if it did or did not work for you.
See you soon

Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Some of my bookmark favicons have disappeared and have been replaced by those that show a blank page. I have read many articles on the problem, but nothing has helped.

    I read many articles about this problem and have found no solution yet. Some of my favicons, which was already good, have disappered. They have been replaced by images of 'white page' where the favocons should be on my favorite Firefox toolbar. Here is a short list of them: the BBC, The Washington Post, HebCal date converter, CapitalOne, FedLoan, US Bank, The Veterans Administartion and Google. I don't recognize a pattern in the types of Web sites and ALL these favicons appear in Internet Explorer and Google Chrome... very strange. This happened more than six months ago. I have read several articles online and tried as much as I can contact here. I picked up some nasty viruses along the way help that hurts and caused enough grief that I really don't need the hunting. So I ask you all to Firefox to help, please. Thank you.

    You can check these prefs on the topic: config page to make sure that they are always default.

    • Browser.chrome.favicons
    • Browser.chrome.site_icons

    You can open the topic: config page via the address bar. You can accept the warning and click on "I'll be careful" to continue.

  • Info by tab I used disappeared and has been replaced by a list of files on my desktop showing whne as etc, I downloaded. Why would this happen?

    Information in the tab I used disappeared and has been replaced with the details of the files on my desktop and when I downloaded/viewed them etc. Why would this happen?

    has inadvertently dragging a folder from your desktop in the firefox window?

    try it now for more clarity

  • Viruses such as the behavior of the Acrobat Reader software. I have a laptop running WIN 7 and kaspersky AV. yesterday when I started my laptop that I see all the icons on my QuickStart bar browser have been changing drive adobe icon and observe also that

    Viruses such as the behavior of the Acrobat Reader software. I have a laptop running WIN 7 and kaspersky AV. yesterday when I started my laptop I see all the icons from the browser on my QuickStart bar have been changed to the adobe reader icon and also observe that many other programs on my desktop have changed to the adobe reader icon. If you click the icon it opens adobe reader. I deleted Adobe reader using Add or remove programs and the icons back to normal. Yet once, I downloaded and installed Adobe reader 11. the problem has resurfaced. then again, I've uninstalled adobe reader software and installed Adobe Reader version 10 with the same question back. I have now uninstalled Adobe Reader. Please advise on how to install a working copy Adobe reader which will not infect or impinge upon other programs in my laptop.

    Hi imoorthy,

    Please follow the troubleshooting steps mentioned in this document KB Application, file icons change in Acrobat/Reader icon.

    Kind regards

    Nicos

  • After having saved HP, all the sounds disappeared

    It asked me to update my Bios (?)  A few weeks ago. Yes, I did. Later, I noticed the laptop was strangely like the internet would be cut frequently. I went to save the laptop for a moment before the problem happened. Bandwidth works fine now, but all the sounds disappeared. I checked for problems using 'Help' suggestions, but he tells me that everything is fine. The sound is output from the headphones or the internal speakers.

    Can I have supported it until before the Bios (?) has been updated.

    The laptop is a HP Pavillion (about 2 years) using windows 7 and Norton 360 (which I ran scans to try to find a problem as well)
    Any suggestions?

    Thanks much for the reply. The model would have helped! haha. (it's a HP Pavilion)

    After that I wrote here, I checked a few other places and saw a post that said to uninstall audio driver and download a new one. It worked.
    For all others, the link is:
    (New driver) download: http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58131.exe

  • Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

    If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

    Best regards

    Q

    Hello

    It may help to place your watch in mode do not disturb before driving:

    -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

    You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

    -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

    To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

    https://www.Apple.com/feedback/watch.html

    (This is a supportive community focused on user - you don't talk to Apple here).

  • I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

    Radeon hd5450

    I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

    Hi Edrey Davila,

    1. what operating system is installed on the computer?
    2. are you sound the computer?

    If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

    Connect your computer to a TV
    http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

    HDTV: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  • My Dell with xp has all the sounds. Sometimes I will leave and then it will come back on. However, not as strong, as it should be. The lights on the speakers are

    My Dell with xp has all the sounds.  Sometimes I will leave and then it will come back on.  However, not as strong, as it should be.  The lights on the speakers are

    Try:

    1. pair an inexpensive connection of headphones in the speaker of your DELL outlet and see if the problem improves.
    2. connect your Dell speakers to another compatible audio device to verify that the speakers are not defective.
    Also visit:
    Caution:
    Absolutely no warranty express or implied is delivered with this post.  The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message.  Entities who follow the advice in this post are at their own risk.

  • All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

    I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

    My problems were not related to the missing CODECS.

    I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

    However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

    I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

    I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

    Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

    Here's an exact quote:

    Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

    All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
    After that, in Registry Editor, navigate yourself in the left pane until you reach

    My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

    And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
    Come in.

    Well, of course, it didn't work the first time. I received this message:

    the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again

    I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

    After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

    Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

    This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

    This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

    This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

    I clicked on apply advanced Drivers32 window security settings.

    I clicked on apply permissions for Drivers32 window.

    Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

    I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

    Hope this helps someone else.

  • lost all my sounds and when I passed all the icons were in different places and everything is much broader.

    Hello

    Last weekend or there abouts I seems to have lost all my sounds and when I passed all the icons were in different places and everything is much broader.

    What has gone wrong?

    Hello

    I did (I think) and it did not work, so it looks like I'll have to call Packard Bell and see what they have to say.

    Thanks for your help anyway

    Ken

    As you have already gone to the website of the manufacturer of the computer and reinstalled the drivers is a good thought to contact Packard Bell about this.

    See you soon.

  • His record game, my microphone is picking up all the sounds around me and to transfer them to my helmet.

    original title: his record game

    For some reason, all listening to ANYTHING on my computer with my headphones Bose, which are designed to eliminate all surrounding sounds, I hear all around me, including Tape this message, as if my microphone is picking up all the sounds around me and to transfer them to my helmet.  I have accidentally done to cause this, please?

    Thank you!!!

    Hello

    Click with the right button on the speaker near the right lower clock - recorders - then right click in the BOX
    and check also show a disabled device and show disconnected devices. Then double-click on your microphone and
    on the levels tab - MUTE it. You could also experiment with using a level lower or less thrust on this
    same tab.

    Connect a microphone, music player or other audio device to your computer - see 'connect a microphone.
    to your computer"which has an image of these parameters.
    http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

    When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
    The same video (s) works correctly when you use Chrome?

    This issue may be caused by malicious software.

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • I don't get all the sounds from my speakers

    Original title: sound recording play

    I don't get all the sounds from my speakers... the icon has an x through it... said that they don't are not hooked... shouldn't have internal sound

    Hello

    1. what version of operating system you are using?

    2. What is the full error message that you receive?

    You can try the procedure in the below mentioned link and check if it helps.

    No sound in Windows
     

    Hope this information is useful.

  • After you have installed Windows XP pro, I can't hear all the sounds of Windows

    Original title: I got a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

    I had a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

    Hello

    Thanks for posting the question on Microsoft community forums. According to the description, you can not hear the sound after installing Windows XP. He would be grateful if you could answer a few questions to refine the question.

    1. What is the brand and model of the computer?

    2 have you installed the audio drivers for the computer?

    3 have you checked the State of the audio device in Device Manager?

    See the steps to check the State of the audio device in Device Manager.

    a. click Start, point to settingsand then click Control Panel.

    b. in Control Panel, double-click System.

    c. click the Device Manager tab.

    d. double-click on a device type, double-click audio for devices of this category.

    e. double-click on a device to view its properties. In the device status box, click the driver tab and click Update driver.

    Follow the given steps.

    Method 1:

    Run the fixit from Microsoft Fixit article and if that helps.

    Diagnose and automatically repair audio playback problems:

    http://support.Microsoft.com/mats/AudioPlayback/

    Method 2:

    I suggest to check the hardware, run the troubleshooter and try to update the drivers. You can follow the article:

    No sound in Windows

    http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Please reply with the status so that we can help you.

  • I can not all the sounds from my computer

    I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

    The sndvol32.exe file is possibly corrupt.

    To replace, there are two methods:

    (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

    (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

    If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

    See you soon,.

    Jerry

Maybe you are looking for