All the Windows updates compressed into a single file for offline use?

Similar Questions

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• Make the png/jpg sequence into a single file png/jpg

  Hello

  does anyone know how can I make animation as sequence of images (png or jpg) and get 1 big png/jpg file?

  frames can be registered vertically or horizontally.

  
  

  what I get is: http://oi62.tinypic.com/2wp7csh.jpg

  
  

  is it possible automatically in AE somehow (option, script, plugin, external software)?

  This isn't a sequence of images, it's a film strip.

  I would make your project to a sequence of images. Make sure that your master or rendered comp is the same width that you want your film.

  1. Now import your images as images, not as a sequence of images to After Effects (you can do something similar to Photoshop)
  2. Select your entire image sequence and then click on file > new comp from selected, then choose unique composition.
  3. This should give you your whole image sequence in a composition with the images in the correct order. If the order is wrong, then start again by selecting the first image in the sequence first and then sliding the last image
  4. Now you need to change the size of your publication by going into settings of Composition (Ctrl/Cmnd + K) and the Advanced tab, click on the upper area of the Center in the anchor selector
  5. Now, go to the Basic tab, make sure that lock the proportions is not selected, and then select the height
  6. Use the arrow key to move to the end of the size of the height and type * and the number of images in the sequence (IOW 640 * 20)
  7. Go back to your publication and add this expression to the position property of the upper layer:

  h = thisComp.height;

  n = thisComp.numLayers;

  y = height/n * index;

  x = thisComp.width/2;

  tempY = n - (height/2);

  y = tempY + index * height;

  [x, y]

  Or select all of your layers, then apply this preset

  If your publication is completed save any image in format PSD using Composition > save the calendar layers Photoshop or Frame save as file

  Your ' e done.

• FIXED ~ can't access the windows update Web site ~ FIXED

  I'm editing my question details & scored the title to indicate that the problem has been corrected.

  I am sharing my 'dose' for these sho could also have a similar problem with Windows Update.  I do not have a Browser Helper Object enabled, which was to be enabled - "MUWebControlClass".  Of course that was axtivex needed control.  Windows Update now performs normally for me & I was able to successfully download & install my updates - yay!

  My original message follows the stars below...

  ***********

  ... the desktop running windows xp pro sp3 & IE8

  For what it's worth, I go to the Microsoft site & downloaded IE 8 & installed, as my first troubleshooting, before you come on this forum.  Theoretically, I should be as up-to-date as I can be with XP Pro SP3 & IE8, but I wanted to see that everything had been downloaded.  Well, I can't this info now.

  I wanted to see which updates had been installed & when I clicked on the link for Windows Update, said the "Welcome to microsoft update" page, below the message to install the activex control required to view the Web site... fthere is no popup message any that I can right click on to install an activex control.

  I googled similar questions on this forum & tried a similar question MrFixIt & who has not resolved the problem I encounter.

  IE8 is NOT my default browser, or generally leave automatic updates 'ON' unless I'm updating.

  I try to keep my current computer with the Windows updates on a monthly basis, I have to use IE8 for a couple of Web sites.  My current default browser is Dragon of Comodo.

  Your input & feedback & suggestions are appreciated!  Thank you all in advance.

  «Click Start ---> 'run'---> and in the dialog box, type "inetcpl.cpl" without the quotes and click on ' OK'.» Click on the "Security tab"--"custom level button" and scroll down to the box "Download signed activex controls" and select ""prompt(recommended"). Click ok and exit. This should activate the InfoBar at the top of the screen, when you visit windows update to download the activex.

  Good luck.

• My "windows update" says he can not search for new updates-error code 80070002. Help, please. Thank you!

  I already tried ideas to stop the Windows Update Service, removal of temporary files to update and restart the Windows update service.

  Hello

  Have you made changes on the computer before this problem?
  Follow these methods mentioned below and check.

  Method 1:
  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:
  a. Click Start, type services.msc without the quotes and press ENTER.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in startup type, select Enable.
  e. Click Start under the service status.
  f. click OK.
  Repeat steps c through f for the following services:
  Background Intelligent Transfer Service
  Cryptographic services
  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.
  Method 2:
  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus software. Check out the following link.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 4:
  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists. Read the following article.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• I can't uninstall all of the programs on my computer. Also the windows updates do not install. Windows Vista Service Pack 2 for x 64-based systems (KB948465)

  I think I have problems arising from the Windows updates do not install it.

  I can't uninstall all the programs already on the computer - I get the message "Please wait while the current program is finshed uninstall or changed" on every single program.

  Also, anything with an authorisation button freezes as son as I click on it without the authorization window popping up. for example. the clock or the managed task advanced details.

  This has led to problems trying to install other software for example. I tried to install a game that failed, because the .NET framework 4 would not install.

  Help!

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  I suggest you follow the steps in the Microsoft KB article for your problem of update.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• How to hide all the future updates to the Windows Mail Junk e-mail filter?

  Is it possible to automatically hide or ignore all future updates for Windows Mail Junk e-mail filter?

  I don't have, and never plan to use Windows Mail, and I'm not sure that I could never be convinced that I should, someday.

  Therefore, all the updates of Windows for this are very very little, but the update system keeps their important marking - so I have to hide them every time.

  Is there a technique to automatically remove this update until it is important to my system?

  I use Windows Vista Home Basic SP2.

  No, you can not hide all the future updates Windows Mail Junk Email Filter. But here is a workaround:

  1 configure automatic updates for the 'updates but let me choose... '. "setting.

  2. when an update of the Windows Mail Junk e-mail filter is available for your approval, thereafter, hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Media Player Windows XP automatically wrong info for my titles. How can I stop all the automatic update of news media?

  Windows XP Media Player is automatically putting the wrong info for my pieces for example the name of the album and the cover.

  How can I stop all the automatic update of news media?

  Windows XP, the version of Windows Media player to date. ' Retrieve additional information on the internet "is not checked.

  "Rearrange music in rip music folder, using rip music settings" is not checked

  "Keep my ratings stars as global ratings in files" is unchecked

  "Maintaining the codecs automatically" is unchecked.

  Under Privacy Options, everything is disabled except "set clock on devices automatically.

  Thank you for your help in this endevor.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what version of windows media player do you use?

  Try the fix tool in the following article and verify.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  See also:
  Resources for the resolution of problems in Windows Media Player
  http://support.Microsoft.com/kb/843509

• How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  In addition to the updates of Windows, there are some tools to run that will give you all kinds of information on your PC:

  Microsoft Baseline Security Analyzer

  Belarc

• whenever I try to install the windows update I get error 00000646, the error message

  Ideas:

  • You have problems with programs
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under.

  2. in the list record under , click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"- by a loop for hours, unable to get to the start

  Hello.

  First of all, I read this page - http://support.microsoft.com/kb/949358

  It says this - "Note if this problem occurs, it may take 30 minutes to undo changes, and then the system will display the login screen Windows.»

  But this is not true for me, I have nowhere near the logon screen. Earlier the PC rebooted, but is IMMEDIATELY returned to the exact same failure screen. There is a line.

  A few notes:

  (1) it is a G46VW mobile computer ASUS 'Republic of gamers ". I had 3 days. There is no DVD drive so I can't use any kind of boot disk.

  (2) I have no attached removable media.

  (3) I don't know how to get to any screen except that this form of failure, so do not know how to enter in a single command.

  (4) all that happens is that I see the ASUS logo, then this screen failure immediately.

  I'm panicking, it's all new. It has worked very well. I started it today, it has been updated slowly. I saw him at about 17%. Then I looked at a few hours later and saw that he was stuck in this process.

  What can I do?

  Hi James,

  I appreciate your patience and manual labor.

  You can follow the steps in the link below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

  1. Go to Start creen and type regedit.
  2. Select regedit , then right-click on the screen.
  3. Click run as administrator.
  4. Right click on computer , then click export.
  5. In the Save in box, select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.
  6. Click Save.
  7. If something goes wrong, you can do a right click on the registry backup file and click on Merge.

  Write to us at the State of the question.

• HP Z800: HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  Newly installed OS - everything seems to work fine, except for the shot without end to WIndows update... Verification of updates. Apparently, this affects the update of Windows 10 as well. Someone at - it ideas? I tried all the options via the site help MS. Merci.

  Greetings,

  Please read this.

  You can wait patiently (updates will appear later) or there is a problem in the article.

  You need to reinstall Windows for the fix. Your PC must be isolated from the network when reinstalling windows. You need to download both updates and install before connecting your PC to the network.

  I used the fix of Ed Bott and it works. But I reinstalled Win 7 again. I wasn't going to wait for hours and hours to get the security updates.

  You can try to install these updates on the problematic installation of Win 7:

  1. apply the Microsoft patch found here. Disconnect from the network.

  2. install the two updates in offline mode and cross your fingers.

  3. repeat on Windows Update.

  See you soon!

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Vista - during the Windows Update, get the error "computer restarted unexpectedly or encountered an unexpected error.

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  * original title - no error number. Message says: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. to install Windows, click "OK" to restart the computer, and then restart extra

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  Hey dkeeney2330

  ·                        try a restore system before this

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theSafe Mode option with the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Copy of the Windows updates to other machines after downloading via WSUS.

  I am currently in the process of updating our domain details. It consists of 214 back-office machines and about 600 points of sale (cases). Each machine back-office has between 2 and 10 of the machines connected to it. All machines are currently under XP SP3. They all need to tinker with the latest critical and security updates. I have updated the 10 machines up to now. My problem is the time it takes for updates to download on the WSUS server.  Is there anyway I can download the updates of Windows to each machine in back-office on the site and then copy the Windows updates on all computers within that site.

  Thanks in advance.

  sniper,

  Maybe try the WSUS forum

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads