Allin a 5520e: PRINTER

Similar Questions

• HP ENVY 5530 e allin one: my printer keeps showing offline, tried many things to try to resolve including uninstall.

  Help.  I'm at a total loss what to do next.  My printer is telling me it is disconnected.  I was on different websites and downloaded the troubleshooting to solve the problem.  When I ran the computer troubleshooting somes back saying the printer isn't switiched, although it most certainly is.  Have uninstalledd the software and installed again. Sometimes it cfomes on then it turns off again. Any help much appreciated.

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • All wireless devices stay better connected
  • Fact faith, your router most secure and hack
  • Can speed up wireless printing

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After setting the IP address static, computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports. 

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <-so watch it!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• How can I get my my HP ENVY 4520 ALLIN ONE TO PRINT

  HOW CAN I GET MY MACBOOK AIR TO PRINT WITH MY NEW HP ENVY 4520 ALL IN ONE

  Go to system, then print, scan or print and fax Preferences (depending on the version of the OS) and at the bottom, click the button "+". I would like to know if it works.

  Good luck

  Paul

• Activation of Webscan for HP 5520e printer all in one

  I m trying to activate Webscan on this printer. The software directs me open security in the settings Menu and turn on Webscan but before I get to that option I get a message from Windows stating security a username password is required. I tried to use the network name and the password, but without success. What is sought here?

  Hi gnomad899,

  Welcome to the Forums of HP's Support. I understand that trying to activate webscan for your printer Photosmart 5520 you is invited for a password to access the built-in web server.

  Please try just pressing on enter the default password is empty.

  If this does not help, then please restore the default settings of the network from the front panel of the printer. The network Restore Defaults are at the bottom of the menu settings wireless. Once you have restored the default settings of the network, run the Wireless Setup Wizard to connect the printer to your wireless network. You should now be able to access the built-in web server.

  Please let me know how it goes.

• 5520e "Device not found" firmware update

  Product: HP Photosmart 5520e printer all in one.  Check the hard drive, and driver seems to be: Photosmart-5520-series_v12 - 2.23.0.dmg, which I believe is the most recent.

  Problem: The firmware is not updated?  Happens in this way while troubleshooting problem try to scan.  I remember correctly, the error message with the sweeping question was a communication problem that was confusing because the printer and the computer communicate very well via USB for printing purposes.  Since turned off direct wireless and use the router and can now scan the documents.

  Using an iMac running 10.6.8 that is physically connected to the printer via a USB cable, and now also via a wireless router.  Am able to print and scan documents.

  Downloaded the latest firmware on computer.  When you try to do the firmware update got error message: device devices not found no. requiring an update of the firmware could be found.  If you think that there is an error, make sure that your device is turned on and properly connected.  -What is this error message telling me that it cannot find the printer, OR, it tells me that the firmware is up to date.  Latest firmware date of 2014-03-28.  I probably can't do an update in the last 6 weeks.  Is there a way to check to see what firmware currently installed?

  Thank you.

  Hello

  Need to print a Page of State printer to determine the version of the Firmware that is currently on the printer.

  Try the steps below to print "printer status Page.

  > touch SETUP (wrench), then

  > Touch TOOLS, then

  > touch PRINTER STATUS REPORT

  The current version of the firmware available is MGP5CN1351AR.

• HP Deskjet 3070 will not print black.

  I have a HP Deskjet 3070 and recently brought a few pack hp ink 364 ink combo from Amazon. The well installed ink cartages. When I try to print in black continues leaving as Faded or not at all. It's strange look I just made them. The printer seems to print correctly using the other colors like red or blue. I tried to alline in the printer, but it failed. can you help me

  Hi, is the printer under warranty?

  Troubleshooting steps

  http://support.HP.com/us-en/document/c04030353

  HP Support phone numbers

  http:// Welcome.HP.com/country/US/en/wwcontact_us.html

• do I need a router to print on my photosmart 5520

  I have a 5520 allin hp photosmart printer and it is very difficult to connect it to the radio, I need a router or the printer does not

  banhien is right the information he gave to you. I would add a little more to that. The type of connection banhien described is known as an AD-HOC connection. The way in which this subject has been designed, it will remain only on for an hour at a time. This is done to prevent the wireless radio to take the space of connection on the device, it connects too. I recommend to do a wireless router if you do not. It is the better and more stable way to connect to a wireless printer. Here are the instructions for a classic wireless connection. I hope this helps to better answer your question.

  Installation of the software of the printer for a wireless network connection:
  http://goo.GL/YeKFj

• HP psc1360 allin 1 7 unwanted windows test print at startup

  everytime I turn on my hp psc 1350 all-in-one connected to Inspiron 1501 running Windows 7. the printer prints a test page.  Use many Inc. (and time). any way to turn off an impression of the event unless I ask you?

  This should help...

  http://support.HP.com/us-en/document/c00027691

• Photosmart 5520 e: How do you print long distance using an IP address?

  Need to print to the Photosmart of old mother 5520e from my PC in another city.

  Is it possible to send documents to the printer using the IP address of the printer?

  If so, how to do that?

  Thank you!

  Hello

  No, you can not use the IP address because you can find thousands of same IP addresses around. Supported sound printer ePrint therfore it has an email address. You can send file formats supported in their email address and it will print.

  Kind regards.

• How can I configure HP4500 all-in-one printer / fax?

  I need install a HP4500 while printer/fax machine, currently I have phone with answering machine, turn, telstra external modem and Hp, what can I connect what?

  As title, I have a HP printer/fax allin. at the mo I have phone with built in answering machine, turn, external modem for Telstra and the HP, what can I connect what?

  "Telstra modem" is far too vague.  Please provide the exact model.

  Your product has not come with a manual Installation Guide and getting started ? You have a specific problem?

  Your HP 4500 fax component must connect to a regular telephone line (not an Internet phone).  Because you have a phone with answering machine, you'll probably want to buy a fax switch so that your answering machine pick up incoming fax calls and vice versa.  There are several different types of these devices, so you will have to do a little research.  If your telephone company offers "distinctive ring" service (two phone numbers on one physical line), you can configure fax to detect such type of ringtone.  Otherwise, you will need to find a camera that responds automatically and switches to the fax if it detects fax negotiation tones. Or order a second phone line.

  Scanner printer parts (and) your HP 4500 can be connected to your PC, either via a cable USB or - if your "router" is also a modem - using an Ethernet network cable.  If you decide to start with a USB connection, make sure to install the software from the CD that came with it before connecting the USB cable.

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.

• print labels easy without using Contacts

  Print the sheet of labels with different addresses with Word for Mac

  Is this a question?

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system