Allocate memory

Hi all, I'm new to programming and I'm studying LabVIEW myself. I wrote a Mathscript code on the block diagram, it works correctly and I recorded it. But after I have opened the same code and it does not work and it says "LabVIEW: memory is full...» "I checked the solution but I don't know how to allocate memory in LabVIEW. It's weird because I saved only a few files.
I'd really appreciate your help. Nice day!

What are typical input values rlo all controls?

(For example if your "sampling rate" is equal to zero, you won't miss memory, of course.)

Tags: NI Software

Similar Questions

  • error 1097 after the call dll function that allocates memory inside

    Hello!

    When a one call my duties in my dll of LabView, I get an error 1097. My function takes a few arguments, and then allocates memory for the measure.

    He doesn't have pointers to this memory area, it's just allocates this memory for himself. I don't know what could be the problem, no doubt, I'm missing something.

    Could you please help?

    Best regards

    Tamas


  • How to allocate memory for string

    How to allocate memory in LabVIEW for char []?

    The table is:

    char ProjectName [260].

    I still have 4 lu byte string Unflatten, suggestions?

    TIA.


  • allocate memory and call the dll function that writes to the pointer

    Hello!

    I have a DLL that has a function as in the following example, I need to call from labview. In C, I need to allocate memory for data and of course the struct. I add the pointer and the length of the data to the struct and call the function with the struct. The function itself inserts values of the struct and affected memory. Someone at - it a working solution how this can be done with Labview?

    typedef struct Thestruct
    {
    UINT16 val1;
    UINT8 val2;
    UINT8 val3;
    DataLength UINT16;
    UINT8 * data;
    } T_Thestruct;

    MY_API status MY_API_CALL udaReceive (handle, T_Thestruct * args);

    I tried in labview (see photo), but I only got values inside the structure as well as the 1097 error, reserved memory included values as before.

    OK, I found the soluton to my own problem. Alignment on the struct must be corrected in Labview. There must be a value between dataLength 2Bytes dummy and the pointer.

  • Failed to allocate memory (CC 2015.3)

    Hi people,

    AE is poping up the message, frequently update it can not allocate memory in different sizes (from 0.000 to 0.003 MB). Topic in the window is (§ 76 0) for 0.000 MB of memory or (5027 §3) when you ask 0.003 MB of memory.

    I had the German version. Anyone with the same mistakes?

    Bildschirmfoto 2016-06-22 um 16.07.39.png

    You can try this

    Purge all the memeory and all the memory and disk CAsh to change-> Purge

    Quit After effects and restart again.

  • Fehler beim co-chair der speaker: 12 (cannot allocate memory)

    Hello

    We have a big problem with one of our virtual machines.

    We use Symantec BackupExec 2014 and this seems to cause huge problems with the VMDK files.

    The thing is, this special VM has thausands of disk files vmdk divided into blocks of 4MB.

    Makes this virtual machine is so slow, that we were unable to work with her.

    So, what you do everything first? right... try to turn...

    But this time: ERROR. Nothing happens. The machine does not start.

    I would try to take a look at the vm-folder on the volume of SAN. But even here, nothing happens. just of hundreds of «...» »

    So I tried to download the whole file. Here, I recognized on the thausands of vmdk files. After that, I cancelled the copy and began to consolidate the disk files.

    After 4 and a half hours (every 10 minutes he took a step forward 1%), the system has halted the process with 12 error (cannot allocate memory)

    I tried to find a solution on the web. But nothing about this kind of problem again.

    does anyone have a tip? Or better, a solution that would be the next us?

    Thanks in advance

    Hackert

    Der Versuch die Maschine zu clones ist eine gute idea zweifelsfrei. Klappt ist alles ok Wenn wenn nicht - durch die grosse Anzahl der Snapshots - muss die Kommandzeile und ein wenig Handarbeit hold. Es gibt Kommandozeilen VMware-Tools die yesterday used werden können. DAS sind vmkfstools (as ESXi und/oder vmware-vdiskmanager as VMware Workstation.) The VMware KB article http://kb.vmware.com/kb/1004545 shows wie das in meherern Entert gemacht werden kann, wenn die Anzahl der zu gross wird und nicht mehr works etc. clones Snapshots. Important ist dabei eine der Daten zu haben current safety, falls was dabei schiefgeht.

    André

  • Cannot power on VM - cannot allocate memory

    I started to see this random question on VM on our companys (3 guests) ESX cluster. I had to stop working on this cluster until we can solve the problem

    I encountered a similar problem before that related to snapshots, but this problem occurs on machines that have ever been instant and in the past, had been working perfectly.

    An excerpt from the log file of the VMware virtual machine:

    2013 07-09 T 00: 41:32.918Z | Worker #0 | I120: DRIVE: OPEN scsi0:0 [' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' persistent R]

    2013 07-09 T 00: 41:32.918Z | Worker #1 | [I120: DRIVE: OPEN scsi0:1 ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' persistent R]

    2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: FileIOErrno2Result: unexpected errno = 12, cannot allocate memory

    2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: AIOGNRC: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (c0002) (0 x 2013).

    2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: OBJLIB-FILEBE: FileBEOpen: unable to open ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (786435).

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot open (cannot allocate memory): ObjLib_Open failed. Type 3

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LINK: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-STRING: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LIB: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' with flags 0xa cannot allocate memory (786441).

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DRIVE: cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': failed to allocate memory (786441).

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': open with success (10) size = 53687091200, hd = 3565896. Type 3

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: 'JD-5-Manager - flat hard' (0xa)

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: Msg_Post: error

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.literal] cannot allocate memory

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LINK: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (0xa): vmfs, 104857600 sectors / 50 GB.

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' or one of the snapshot disks it depends on.

    2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: ----------------------------------------

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LIB: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (flags 0xa, type vmfs).

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISK: disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' a UUID 60 00 c2 9 c cf e7 7A d0 - c9 a4 f2 29 3f 42 e7 e9'

    2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DRIVE: OPEN "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" Geo (6527/255/63) BIOS Geo (0/0/0)

    2013 07-09 T 00: 41:32.933Z | VMX | I120: DISC: discs of opening had 16 ms.

    2013 07-09 T 00: 41:32.933Z | VMX | I120: Module DiskEarly market failed.

    2013 07-09 T 00: 41:32.933Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

    2013 07-09 T 00: 41:32.933Z | VMX | I120: scsi0:0: numIOs = 0 numMergedIOs = 0 numSplitIOs = 0 (0.0%)

    2013 07-09 T 00: 41:32.933Z | VMX | I120: Closing of disc scsi0:0

    2013 07-09 T 00: 41:32.933Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': closed.

    2013 07-09 T 00: 41:32.937Z | VMX | I120: WORKER: asyncOps = 3 maxActiveOps = 2 maxPending = 0 maxCompleted = 2

    And the vmdk disk file:

    # Disk DescriptorFile

    version = 1

    Encoding = 'UTF-8 '.

    CID = 4ed52c7e

    parentCID = ffffffff

    isNativeSnapshot = 'no '.

    createType = "vmfs".

    # Description of the measure

    RW 629145600 VMFS "JD-5-manager_1 - flat hard."

    # The database disk

    #DDB

    DDB. Deletable = 'true '.

    ddb.virtualHWVersion = '8 '.

    ddb.longContentID = "8264138edeb9f6fb2afaf3be4ed52c7e".

    DDB. UUID = "60 00 C2 98 c9 03 10 f9 - 19 1A 34 a1 ba e3 1 c c3"

    DDB. Geometry.Cylinders = "39162.

    DDB. Geometry.Heads = "255".

    DDB. Geometry.sectors = "63".

    ddb.thinProvisioned = '1 '.

    ddb.adapterType = "free".

    As you can see that the parentCID is the correct setting for a vmdk with no snapshots.

    Tips to solve this problem?

    Thank you kindly.

    After asking, I checked the vmkwarning log and found the following:

    / var/log # tail vmkwarning.log

    (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

    (2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

    (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

    (2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

    (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

    (2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

    (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend

    (2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP

    (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand

    (2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa

    Which leads me to the following VMware KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004424

    Using PowerCLI, I checked the total size of all the VMDK files on a member of the cluster with the following command:

    PowerCLI > Get-hard drive - Datastore |-ExpandProperty CapacityGB select | measure - sum - ave - max - min

    County: 78

    Average: 197.730180789263

    Sum: 15422.9541015625

    Maximum: 544.49609375

    Minimum: 50

    Property:

    According to this article, the maximum size supported all open VMDK files was only 8 TB, so I was much higher than that, so fall on issues.

    I adjusted the VMFS3. MaxHeapSizeMB at the maxmum 256 MB to compensate and that solved this problem.

  • db_load error: cannot allocate memory

    Hello

    When I try to import a dump file, I always get this error:


    db_load: BDB2055 lock table is out of available lock entries

    db_load: cannot allocate memory

    I performed "db_load f outdb/outdb2 - h env xass.db".


    and I put max locks:

    dbenv-> set_lk_max_locks (dbenv, 1000);

    but it does not work.


    What should I do to avoid this problem?

    Thank you for your help in advance



    Mark



    Update:


    I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.

    The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?

    because I can not increase the infinite number of locks!

    If this is not the case, How can I cause "db_load" release of transaction locks?

    Is someone can help me?

    Mark

    Hi Mark,

    If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.

    The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.

    Kind regards

    Winter, Oracle Berkeley DB.

  • This error: "java.io.IOException: error = 12, cannot allocate memory.

    I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:

    var myCommand = new Command ("ls");
    myCommand.execute (true);
    System.log (myCommand.Result);

    We use VAPP VCO and we continue this error:

    "Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"

    Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.

    Have you tried to increase the memory of the virtual machine?

    I assume that you already have tried to restart the virtual machine without increasing the memory, just?

    Christophe.

  • put db failed for "cannot allocate memory".

    Hi exports BDB.


    I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

    (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

    (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

    (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

    (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

    (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

    BRS,

    Min

    Hi Min,

    The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

    (1) the memory will be allocated heap if you have not defined a function alloc.

    (2) all databases in an environment share the same cache (16 m here).

    (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

    (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

    https://forums.Oracle.com/thread/2560134

    The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

    To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

    Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

    This thread can help you on this:

    https://forums.Oracle.com/thread/2557981

    5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

    Kind regards

    Winter, Oracle Berkeley DB

  • AMT: cannot allocate memory - is there limit to the databases on a single box num

    Hello

    Specification of the server:
    Windows 2008 R2 x 64 with all updates applied

    Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)

    10 GB OF RAM

    I have a standby server that has all my databases to watch over him

    Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory

    I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database

    It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.

    With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free

    If I withdraw half a dozen databases in the scripts, it starts working again.

    I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

    Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to

    Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!

    I reorded the data bases in the script and it still fails at the end, not on a specific database

    I also added restarts listeners for scripts that made no difference

    I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases

    Thank you
    Robert

    Have you tried a note

    AMT-12531 on Windows 64-bit [ID 1384337.1]

    I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

    I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

  • Help.  Error "cannot allocate memory".

    Hey all,.

    I tried a search first, and I tried google.  I have to look at a PC that has CS5 or CS5.5 tomorrow, it runs Windows 7 64 bit with 16 GB of Ram.

    The error given is:

    "Cannot allocate 0.000 MB of memory. Or decrease memory for rendering of the framework requirements

    or install more RAM. (Object 123803/U.Mem) »

    And I have no idea.

    I suspect, it might be in the way that there AE set up, but wont know until I see the machine.  Any suggestion is appreciated.

    See you soon

    The after effects CC (12,2) update solves this problem.

    Let us know how it works for you after installing the update.

  • ORA-04030: of process when an attempt to allocate memory

    Hello

    I did a digital dashboard with 12 application. Each job well, but one last have error.

    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 4030, message: ORA-04030: lack of memory of process when trying to allocate 123404 bytes


    Product information
    Oracle Business Intelligence product 10.1.3.4.1 Version (Build 090414.1900)
    Physical presentation catalog path \\?\D:\oracle\bise1\bidata\web\catalog\bitest\root
    Oracle BI Server Data Source AnalyticsWeb
    Available paging memory (MB) 12517
    Available virtual address space (MB) 3843

    My db admin don't see any problem in the database :)
    My NQSconfig.ini is standard I did no changes.

    What the problem maybe bi server have sufficient resources?

    Kind regards
    Luko

    Hello

    SUMMARY links, below

    http://www.DBA-Oracle.com/t_ora_04030_out_process_memory.htm

    OR

    http://ORA-04030.ora-code.com/MSG/75705.html

    Thank you
    Oldia...

  • Could not allocate memory or additional processors in an image file in 10 workstation

    Hi all.  I have a workstation image created originally on AWS (Amazon) and exported to a VMWare image.  I use the last workstation 10.0.0.7, and cannot change the allocated memory (or the number of processors) for the image.  I tried this on 2 machines and the allocated memory will remain unchanged to 2 GB and a single processor.  A machine is a Pro MS Surface 3 with 8 GB 8.1 Windows running, the other is a Lenovo Thinkpad laptop with 16 GB also runs win 8.1.  The settings are grayed out so I can't type or use the cursor in any direction.

    Can anyone help?  Of course, to the point that it is the image works slow with only 2 GB allocated, is unacceptable.

    Thank you!!

    Change the values for the RAM and the processor must be done when the virtual machine is turned off, not suspended.

    If you cannot change these values even with the virtual machine off - try changing the vmx file directly.

  • How to allocate memory

    Hi all

    The allocation of the memory (RAM) for the new installation of oracle.

    RAM memory: GB n
    Processors: m

    PGA =? %
    BMG =? %

    Temp = TS? Is this related to the RAM/virtual memory

    Oracle 10.2.0.4
    operating system: AIX 5.3

    Thanks in advance

    There is no hard and fast rule for the allocation of memory to any instance. Up to a few methods used for the assignment.

    SGA_TARGET = (TOTAL_MEM * 80%) * 20% to 40% for an OLTP system

    PGA_AGGREGATE_TARGET = (TOTAL_MEM * 80%) * 20% for an OLTP system
    PGA_AGGREGATE_TARGET = (TOTAL_MEM * 80%) * 50% for a DSS system

    Where TOTAL_MEMORY is the total memory available to the system. If multi-instance applications running on the machine, the values must be adjusted accordingly.

    Once the databases work with all its strength, adjust the values of parameter from different views.

Maybe you are looking for