Allocate multiple cores of the only host for CPU on a virtual machine

Hello

You don't know if it is possible, but could find is not online.

An application on my virtual machine uses only a carrot and I want to accelerate.

Add more cores on this virtual machine is meaningless, to that effect, I would like to allocate multiple cores of the host that will act as a single core on the virtual machine.

Is this possible?

Thank you

Herman

As already stated above, this is not possible, and you have two options:

1 buy a new CPU with a clock higher;

2. that your application works with multiple processors.

Tags: VMware

Similar Questions

After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

Here is the error msg I get from vsphere client.
Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.
The system cannot find the specified file
VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.
I have ssh client due to vmware ESX.
ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple
564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk
Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log
Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log
Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk
Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk
It seems that all the files are there. Except that there are some spaces.
/ vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".
# Disk DescriptorFile
version = 1
Encoding = "windows-1252".
CID = 97c834c1
parentCID = ffffffff
isNativeSnapshot = 'no '.
createType = "twoGbMaxExtentSparse.
# Description of the measure
RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.
RW 16384 SPARSE "Windows w2k3 - s009.vmdk.
# The database disk
#DDB
ddb.virtualHWVersion = "7".
DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"
DDB. Geometry.Cylinders = "16383.
DDB. Geometry.Heads = "16".
DDB. Geometry.sectors = "63".
ddb.adapterType = 'ide '.
ddb.toolsVersion = "8228.
ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".
and here's a copy of the vmware.log file
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).
2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.
2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------
2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.
2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.
2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0
2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0
2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff
2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output
2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()
2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections
2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).
2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0
2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.
2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

André

a problem in passing multiple values in the loop settings for

Hi all

I am facing a problem in passing multiple values in the loop settings for.

EX:

CREATE or REPLACE PROCEDURE (pr_id OUT NUMBER) HAVE

tab type is table of NUMBER;

TEMP_TAB TAB;

BEGIN

Select the COLLECT LOOSE pr temp_tab pr_id;

I'm in 1.TEMP_TAB. loop of COUNTING

PR_ID: = temp_tab (i);

end loop;

END TEST;

OUTPUT:-

pr_id = 234578

in the example above, I'm only a value as an out parameter. but I send you PR_ID of the loop.
why I don't get all the values that the parameters.please offer a solution for me.

Thank you my friend.

More clarification, let's look at your code...

-- create a procedure and have a single numeric out variable
CREATE OR REPLACE PROCEDURE TEST ( pr_id OUT NUMBER ) AS
  -- declare a type as an array of numbers
  type tab is table of NUMBER;
  -- declare a varianble of that array type
  TEMP_TAB TAB;
BEGIN
  -- query all the values from the table into the array
  select pr_id BULK COLLECT INTO temp_tab from pr;
  -- loop through each value in the array
  for i in 1..TEMP_TAB.COUNT loop
    -- set the value of the single OUT parameter, OVERWRITING any previous value it has
    PR_ID := temp_tab(i);
    -- loop around to the next value
  end loop;
  -- end the procedure with the final value of PR_ID
END TEST;

Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.
Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

Hi Christafarian,

Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

You wouldn't be the first. I'm sorry.

The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

I found:
- If you pull the iPhone in a well-lit environment, it records at a constant speed.
- In lighting challenged environments, you get images image variable rate.
I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

Uses 3rd party freeware really the only solution for this problem?

With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

Thank you
Kevin

3407: cannot allocate space to store the property information for global cache
Salvation of the experts on the issue of a load in ttisql as follows, statement

CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;

This exception is thrown, and I can't find anything with google:

3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid

My my_ttdb DSN is configed as follows:
[my_ttdb]
Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
Data store = / home/timesten/data/database / my_ttdb
LogDir = / home/timesten/logs
PermSize = 4000
TempSize = 32
DatabaseCharacterSet = AL32UTF8
OracleNetServiceName = amq_915

The result of cachegroups is:

Group cache CACHEUSER. DOMAIN_GROUP:

Group cache type: asynchronous, Writethrough global (dynamic)
AutoRefresh: No.
Breeding: LRU on

Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
Type of table: spread

Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
Type of table: spread

The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.

Waiting for your help, thank you.
According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.

As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.

Tim

LUN access is the only host

Hello
I have 3 Dell MD3000i iSCSI connected server blade, the three guests can see/access the same logical unit number but when I create a virtual machine under its unique host access by saying is that correct?

This is probably because you are connected directly to the ESX host. Because the hosts are not managed by vCenter (or if they are, you are not connected to it) your host thinks it's the only host touch this LUN. Looking at this capture, screen, I would say that it is correct.
- Kyle

Cant be able to see the disc format option while creating a virtual machine

Hello
When I try to create a VM, I can't able to see options disc format (thin provision) not only on his arrival for all hosts host, clusters, data center in Vcenter and and all data warehouses. Before it was working fine yesterday, I'm not able to see. How do we enable this option. What is the cause of this problem.
Please help me VMware Guru. Since we very request with limited resources, we have to reverse the If select layout slim brand new virtual machine.
Work around: enabled storage profile in one of the cluster and I tried it but no luck
All are allowed and showing same
Recent change of him that activity is carried out in our end is added to the new data store.
Please see the screen shot for your reference below.

continue to the section "Select a disk" and then under create a disk task, you will have an option under "Supply of drive" to select the desired disc type.

I have a product key for a pre-installed version of Windows 7 Pro 64 bit, now I need an ISO standard for installation in a virtual machine

Hello

I bought a refurbished machine that came with Win 7 Pro pre-installed. I erased the HARD drive. Completely. Nothing more.

I don't want Win 7 installed on the drive, but I need an ISO to install it in a virtual machine for research reasons.

I tried to download the ISO of http://www.microsoft.com/en-us/software-recovery, but when I gave the product key, I got a response that I should turn to the vendor of the computer and that is preloaded.

When I did and asked an ISO, they told me to download from http://www.microsoft.com/en-us/software-recovery. This seems to be the only source for Windows ISOs left in the world.

So, I run long in circles... infinte loop... :-(

How can I solve this misery?

Thanks for the replies!

For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. ISO file which is a digital reproduction of an optical disc.

It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

Given that this option is no longer available, what are your options?

See the article for more details: how: what are my options for getting Windows 7 reinstall media?

Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

Hello world...
I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.
After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.
I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.
I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.
I tried two VM to be sure that the problem is not only on a virtual machine.
First of all, the mouse.
My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.
I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).
Second problem.
After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.
When I go to my network card configuration, IP settings are reset in DHCP mode.
If I go again all my IP settings, Windows says:
The IP address is hidden from the network and Dial-up connections
folder because it is not physically in the computer or is a riser
It does not work. If the same address is assigned to both adapters and
they become active, only one of them will use this address. This may result
in the incorrect system configuration. You want to enter a different IP address
address of this adapter in the list of IP addresses for this card in the list
Advanced IP address in the dialog box
If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.
If I don't answer, the network working again.
I think it is a strange message but the work of the vSphere maybe network now.
Anyone have any idea why my work network and mouse as this upgrade after.
All other VM that is not upgraded so far works great.
Thanks in advance...

(1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

(2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

(a) open a command prompt

(b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

(c) type (without the quotes): "start devmgmt.msc"

Satellite U400: Where to find the latest driver for CPU Intel CORE 2 Duo

I think I had the latest drivers for this process, but I did something and now the drivers are back to: 2004, please LOOK AT THE SCREENSHOT that I show here and tell me what is the name of these drivers I need to download & install? Ok thank you.

Photo: [http://s5.tinypic.com/24n2n3m.jpg]

Made a mistake and installed OLD VERSION on the NEW version of the driver and now, if someone can please help me to find the name and the driver for this Intel CORE TM 2duo driver? ... Because my laptop started to work much more now with this 2004 the old version and now it is extremely hot.
Help?

Hey Buddy

These drivers are part of the windows operating system. It is a Microsoft driver and I doubt that you have a newer version installed I think you mixed with something!

I can say with certainty that you will find not all CPU drivers and to be honest, I never heard special drivers
You must only ensure that a right chipset driver has been installed all that s!

ESXi 5 multiple networks on the same host

Is it possible to have a host with multiple (three) cards of each on a separate network? How would you configure the network adapters in vSphere?

Welcome to the VMware forums communities. It's not a problem seen ESXi on 3 separate networks.

By dΘfaut of ESXi installation will create a virtual switch (vSwitch0) with a management port and the Virtual Machine port group.

You'll want to create other vSwitches 2 with 2 other network cards. Configuration > Networking tab, click Add Network. In the Add Network Wizard you select the Virtual Machine as the Type of connection and on the next screen, you will be able to create a new vSwitch with one of the NIC ports. You can repeat this process for the other NIC.

When you configure your virtual machines, you will select a network tag which is appropriate for the physical network you want to connect to.

Depending on your network needs you can configure things differently. If you use a VLAN, then you can have a unique vSwitch with multiple virtual machine port groups (each linked to a specicifc VLAN).

Multiple downloads of the same update for Windows Vista HP

Could Hello, please someone help? I've had no luck so far with the Microsoft support line.

On October 13 and 14, I got 10 downloads of updates to MS came on my computer whenever I turned it on and outside - in total 19 times for each download for about a week. He seems to have stopped now, but it is now constantly try to configure something - whenever I turn on it tries to do it but then past my welcome screen and whenever I turn off the phone it tell me also if you can download a update that always fails to load. I searched an error code - 800 b 0100 - and tried a fix - KB3093983 I think. In addition, the machine seems to be freezing intermittently, once I'm in.

Dowloads/updates that appears 19 times in my updates are history - some of them anyway - KB3085544, KB3085618, KB3080446, KB3093513, KB3094996, BK3097966, KB3088195.

I don't know what to do - find out if I have a virus somewhere - not show on my antivirus, if I should try to uninstall 18 19 updates, if I should disable the automatic refresh for the moment, etc..

Any notice received with gratitude. You will probably be able to tell from my language/mistakes here that I am very untechy then please also patronizing that you like - the simpler the better.

Thank you very much in anticipation. Sara

I'm sure that you see the effects of an ongoing infection & probably to long date of a certain type. (Yes, there are infections the scanners can't detect.)

As if that wasn't enough, my other concerns include:
- The fact that the most recent (i.e., 13 Oct-15) for Internet Explorer Cumulative security update is not installed. [Do not know how many cumulative updates you miss but I suspect his way more than just a].
- The fact that IE8 has never been installed, AND the fact that the sine qua non updates for IE9 have never been installed. [12 Jan-16, IE7 & IE8 will allow more be supported.]
- The fact that the two published 2½ & 4 years critical security updates were installed only a day or two ago.
- Your misguided use of registry cleaners.
In view of the foregoing...

The computer must NOT be connected to the internet [regardless of the browser you are using] or local networks (i.e. other computers) in its current state. All business & personal data (including passwords online banking & credit) must be considered at risk, if not already compromised.

OPTION A: Trash of all your data (for example, all emails; contents of the My documents folder etc), format the hard drive and then do a clean install of Windows Vista (or pay someone mucho buckos to do it for you).

OPTION B: Buy a whole new (e.g., Win7;) WIN8.1; Computer Win10) & move on your life. [Yes, computers with Win7 preinstalled are always available - but.] I suspect, not much longer.]

Wish I had better news for you. Good luck!

PS: Mark my messages as being HELPFUL would be highly appreciated. Marking my last answer as the ANSWER, too. You can also post your comments here: http://answers.microsoft.com/en-us/feedback/forum

THE ONLY LINK FOR CUSTUMER SERVICE THAT WORKS IS THE ONE ON THE FORUM, I HAVE TO CANCEL MY SUBSCRIPTION TO THE MONTH, CANCEL

THE ONLY LINK THAT WORKS FOR THE CUSTOMER SERVICE IS THIS ONE, I HAVE CHOSEN TO CANCEL THE SUBSCRIPTION, HE BROUGHT ME HERE, CANCEL THE SUBSCRIPTION
[Profanity removed... This is a family forum... MOD]

To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If he continues to not try to use a different browser.

https://helpx.Adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

Concerning

Stéphane

The only HTML for analytics in Muse, is GA?

I'm confused:
1. Is there a Muse or BC HTML for website analytics, or is on the site of the only Google Analytics? It seems that I read that Muse would publish an HTML < head > element, but I can't find such a thing.
2. When GA is used in the head of <>, the same data is published in Muse manage and also the site of GA?
Thank you
Greg

Hi Greg,.

British Colombia has its own analytical engine. However, muse is a design software, does not come with any analytical engine. You can add google analytic or other analytical code on Muse website in the section "HTML for head" available in the Page Properties > data Meta.

Kind regards

Aish

the only option for full-screen video player / swf?
I think I already know the answer, but wanted to check. outdoors by opening a new window chromeless with the player up to 100% and the width, there is no other way to have actually video full screen or any swf using the version of player 8,00 +? Unfortunately, I have a drive that works very well, in 9 with its feature full screen, however I need to also cover 8. The only thing I can think is the new window...

anyone?

Thank you!
You're right, if you want to make a flash 8 Player do something similar. You need to do the contextual approach.
It is possible to publish to swf version 8 and only one button full screen if the player is 9 + If this is an acceptable compromise. Player 9 penetration stats are quite high, but there are certain groups of users where it could still be Player 8, for example, large companies with rigid COMPUTER strategies.

Allocate multiple cores of the only host for CPU on a virtual machine

Similar Questions

Maybe you are looking for