Allow read, write, rename but WITHOUT permissions to remove on Server 2003 R2

Similar Questions

• Open physical standby mode read/write to test without return of flame

  I have successfully installed a physical database standby 10 gr 2 (10.2.0.3 EA). Now I have to test my application with the database pending, so I have to
  Open (enable) in read/write mode (don't want to use FLASHBACK DATABASE), I know that I have to recreate the database pending scracth after completing the test.
  
  So far, I did these steps:
  
  1. on the PRIMARY database, I disabled the log destination archive:
  ALTER system set log_archive_dest_state_2 = 'reporter ';
  2. on the day before, I cancel managed recovery
  ALTER database recover managed standby database cancel;
  
  
  Can anyone provide the remaining steps to open the write standby database? I searched the oracle documentation and all the steps require the flashbak database.
  
  Thanks in advance.
  
  S.H.

  Ok

  You could do a failover on the eve (without doing anything at the elementary level)

  So to run these on your watch.

  SQL > alter database recover managed standby database cancel;
  Database altered.
  SQL > alter database recover managed standby database finish;
  Database altered.
  SQL > alter database validation at the transition to the primary with the stop of the session;
  Database altered.
  SQL > alter database open;
  Database altered.

  Then simply stop the day before (not primary) and rebuild as the standby again. Delete and re-create.

  Make sure that your Data Guard alter system set log_archive_dest_state_2 = delay; Are fixed on both sides.

  This can help:

  http://www.Oracle.com/technetwork/database/features/availability/MAA-WP-10gR2-faststartfailoverbestp-131997.PDF

  You want to split the day before with really nothing do in elementary school except reporter.

  Best regards

  mseberg

  Edited by: mseberg May 14, 2012 14:39

• Manipulation of the Phonlog but without success in removing an element

  Hello

  I wrote a small application that needs to manipulate the last entry in the phonelog. I want to replace the number dialed by a custom filter. Only the custom number must be in the newspaper. Writing number custom works very good journal but by removing the number dialed does not work. I read in another thread that der had a problem with the removal of items phonlog in v4.2. I develop on version 4.5 fact that the problem persists or I did something wrong (see list below).

  import java.util.Vector;import net.rim.blackberry.api.phone.phonelogs.CallLog;import net.rim.blackberry.api.phone.phonelogs.PhoneCallLog;import net.rim.blackberry.api.phone.phonelogs.PhoneCallLogID;import net.rim.blackberry.api.phone.phonelogs.PhoneLogs;import net.rim.device.api.system.PersistentStore;import net.rim.device.api.util.StringMatch;
  
  public class PhoneLogListener implements     net.rim.blackberry.api.phone.phonelogs.PhoneLogListener {
  
    private AsteriskMenuItem caller;  private boolean editFlag = false;
  
     public PhoneLogListener (AsteriskMenuItem theMenuItem)    {     caller = theMenuItem; }
  
    public void callLogAdded(CallLog cl) {
  
            PhoneCallLog myLog = ((PhoneCallLog)cl);
  
            //get ne number to be write in the log            String participantNumber =  (myLog.getParticipant()).getNumber();         //get the current service number from the persistent store (String)           Vector persStore  = (Vector) (PersistentStore.getPersistentObject( 0xd4b6b5eeea339daL )).getContents();           String currentServiceNumber = (String)persStore.firstElement();
  
            //if the participantnumber starts with the servicenumber we did come from the application and want to edit the logentry           if (participantNumber.startsWith(currentServiceNumber));          {             //set the number we want to show                                myLog.setParticipant(new PhoneCallLogID(caller.getPhoneNumber2()));
  
                                  //remove the listener to prevent an endless loop                PhoneLogs.removeListener(this);
  
                                  //---> the folowing does not work                    //(PhoneLogs.getInstance()).deleteCall(0, PhoneLogs.FOLDER_NORMAL_CALLS);             //---> the folowing works                                (PhoneLogs.getInstance()).addCall(myLog);           }
  
     }
  
   public void callLogRemoved(CallLog cl) {      // TODO Auto-generated method stub
  
    }
  
     public void callLogUpdated(CallLog cl, CallLog oldCl) {       // TODO Auto-generated method stub
  
    }
  
     public void reset() {     // TODO Auto-generated method stub
  
    }
  
  }
  

  The invokeLater proved to be crucial for my scenario.

  You can learn more here:

  http://tinyurl.com/dlg36t

  Or search through the forums.

• is it possible to allow users to install approved without admin rights to the Server 2008 environment?

  IM currently working on an Active directory using MS server 2008 environment. I am trying to configure user accounts to allow them to install the software certified with rights admin... .is it possible without violating Security?

  Hi Lenn,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question on the Windows Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Synchronization with Serial read/write problems. can not get the functionality of the terminal emulator

  Hello

  I am writing a VI to control PWM with a microcontroller via a serial port. I wrote a simple code for the microcontroller that allows me to set the ratio of duty cycle on a scale of 0-65535. It works very well with Termite of Compuphase (RS-232 plug); The microcontroller invited me to an entry, expected that I would one, updates and expected another entry when I decided to send him. Now, I'm trying to get the same functionality on a LabVIEW vi but hit a snag.

  When I tried to send my orders with a series read base and an example of writing, everything worked fine. I could see the prompt entry, write an entry and if I was quick enough, check out the update message. Even when I was not fast enough, I was able to check the update by monitoring the PWM pin with a Logic Analyzer. The problem with the basic example, however, is that I need to update the report to aura cyclical ratio, so I went for an example of reading continues writing. The problem I've met; is that I have to switch between reading and writing to make it work. When I do that, either I don't hold write it down long enough and nothing happens, or I get several updates when I switch to reading. Some of these updates don't even match and produce updates to defective upgrades for example; 16000 16000, 16000, 16000, 6000, 600, 60, 16000, 1600, 60, 0, 0, 0, 16000, 60, 0, 0 etc.

  I tried which allows characters of endpoint in the hope that the writing would end at the end and go to reading where he would receive a termination character and wait for me allow writing once again, but nothing helped. I still have to alternate between the two and either get no response on reading several updates of variable accuracy. I tried to remove her allows read/write and their structures of matter in the hope that the loop flow, associated with the characters of endpoint would the case, but then the updates don't register at all. The funny thing is I did a VI like this before with an Arduino and that there not even no need to switch between writing and reading (I'm now using a Board of Freescale FRDM).

  I was also the frequency of timeout errors; Error-1073807339 at VISA Read, reason Possible: VISA Hex 0xBFFF0015. I removed the option to stop the while loop if there is an error so I can run but always pops up an error on the judgment occasionally. Could the problem of synchronization always cause me problems?

  Would appreciate all advice really, I am providing my slightly modified example screws and can provide the code for microcontroller on request, even if it's very simple.

  Thanks in advance, it is
  Yusif Nurizade

  In other words, frankly, a good bad example you according to your code. Also, you have the order of writing and read upside down in your amendment if the instrument requires a command to return something. It should really be using a structure of the event. The structure of the event around a write and read and use a value change event. I have attached a quick change. This mod is still a reading after writing. If necessary, you may have two separate events to write and read.

• In the target FPGA read/write control function?

  Hi people,

  I learn a lot from the sample project FPGA, including how you can easily retrieve and set controls and indicators in an FPGA using the read/write control function running in an RT target.

  However, I can't find a way to do something similar in a FPGA target.  I've been down this road before - that is, trying to move the data in/out a looping VI FPGA (void) to a (parent) FPGA VI - where my memory points to reach what I needed use.

  So I was happy to see the palette FPGA enabled me to drop the control functions to read/write on a FPGA vi target.  But alas there where tons of errors (not compatible son for target, etc.) and I guess now it's not possible.

  So, just to be sure, I'm not missing something, is there something like control functions to read/write to use in an FPGA for read/write in an another FPGA (looped)?

  In addition, why would I be able to read/write on a FPGA vi control functions if they are not supported?  (Sorry for the n00b question)

  Thank you

  Steve

  maherhome wrote:

  You're right that I don't have this knot in my palette.  However, I also do not seem to have a Refnum Occurrence in the palette is in the FPGA (see below), but I need to synchronize several loops of FPGA and added research using the textfield in the VI editor (and if compiles and runs).  So 6 months to Labview and I'm fuzzy on how the palette is restricted

  I don't know what you're trying to prove here. There is no control of refnum in search in your image. Occurrences are available in FPGA, and for control of refnum for one you just right click on a function of the instance and create a control. If you can create a valid thread of a certain type of data, then you can create a control or the indicator for it, regardless of the question to know if this type of control or indicator appears in the palettes. However, the functions that you can use in the block diagram are limited by what is available in the palettes.

  maherhome wrote:

  Regarding orders read/write for the FPGA/lights, I'm surprised that the infrastructure developed to allow read/write between RT and FPGA has not mobilized to allow read/write between FPGA and FPGA.  The elements of memory function, but they are less convenient.

  You may have noticed that you cannot compile the individual parts of an FPGA VI and combine them later; This is because when you compile an FPGA VI, all its subVIs are essentially merged to create a single block diagram (with additional logic if one not reentrant Subvi is used in multiple locations, this is why it is not recommended on FPGA). The subVIs no longer exist in the FPGA compiled; reading and writing a control on them would make no sense. If you want similar behavior, use global variables - but understand that global variables store values in FPGA logic resources. Using the elements of memory (or FIFO, which can also store in memory) leaves more fabric available FPGA logic by storing data in resources specially designed for this purpose.

• How to add more variables to a read/write control?

  

  See how the read/write control is connected to global variables? I want to add more variables, I created the globals (some are listed in the table above), but as you can see that they are not available in the read/write control. How can I add them? I also tried to create a new read/write control, but as you can see that didn't help.

  Any help would be appreciated.

  Hi count3r5tr1ke,

  It seems that you are referencing a particular bitfile in open FPGA reference. I think that even when you save your FPGA VI, VI real time still referencing an older bitfile. Have you tried re - compile and referring to the new bitfile once finished compiling? A sure way to make sure that you have the most up-to-date bitfile is to check the VI option when you right-click on the FPGA Open reference and select Configure the reference open FPGA. When this option is checked, if you make changes to the FPGA code, it will force you to re - compile the FPGA VI before you reference it on the real-time side.

  Best regards,

• Make the NTFS read/write permissions without possibility to create/delete folders

  Out to one of our sites, we have a server running Windows Server R2 of 2012 which took a file share accessible to our people on the spot. Our project managers have developed a very strict folder for this file share structure, and for the purposes of verification, they want to stick to the closer this structure as possible.

  Therefore, although the local people must have read/write access to create, edit, and delete files, they won't they are able to create or delete folders. They want to use the existing folders and not to store stuff in folders that nobody knows there is except for the person who created them.

  The closest way to you, I got to do is to uncheck the advanced permissions "create folders / adding data" and "Delete subfolders and files." This has some side effects, however, the most notable being the inability to add data to the files, some files (such as CAD drawings) can be changed by anyone except the person who created them.

  Is there a way using only the NTFS permissions to accomplish what the project leaders? And if not, are there any third-party utilities that will help us do this?

  Thanks in advance for any help.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can not open Illustrator CC 2015, read/write permissions error, but the permissions are set correctly.

  I can not open Illustrator because of this error.

  "To work properly, Adobe Illustrator requires permissions of folder preferences be"read-write..." »

  Link support on the error message suggests to change permissions to a file location that does not exist. All permissions are set to read-write, and no changes have been made since the upgrade to 2015.  Uninstalling and reinstalling did not work.  Very frustrating to pay for a product that I can't use.

  I solved the problem by resetting the permissions of my entire disk (apply to items included...). I still can't explain why it was necessary after the upgrade to 2015 from 2014 CC CC.

• I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I enable to save the mp3 files on my computer?

  I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I activate the Firefox save MP3s on my computer?

  Go to Options > Applications tab > MPEG Layer 3 audio(audio/mpeg) image search > use the "Save file" option on the menu drop down.

• Satellite P500/01R reads the data, but cannot write data on CD files

  I recently bought a laptop Satellite P500/01R. I am able to read a data CD, but can't write data on CD files. The CD is read/write.

  Any ideas?

  Hello

  Have you tried different burning software?
  I m using Nero and in my opinion one of the apps better combustion.
  Here, I can choose between CD, DVD, DL or Blueray (only possible if the CD/DVD drive also supports this).

  Have you also checked diffΘrents CDs from different manufacturers?
  You should do this since not all disks are 100% compatible.
  I had several problems with different CD or DVD in most of the cases it was a compatibility issue, I tried TDK and this kind of drive is compatible with my CD/DVD drive
  I m using the standard of R.

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW

• Do not read CD but DVD read & write

  Hello

  In my ACER laptop, now I am facing problem CD format is not read but DVD can read & write also.
  Could be he you pls tell me what may be the problem?

  Hi ABN1706,

  Please see the link below for an article about the if your CD-ROM drive is not recognized, with a few possible corrections:

  http://support.Microsoft.com/kb/314060

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I bought the software Acrobat reader pro plan, but I am still unable to protect my files? How can I protect my files when tools only allows me to add them?

  I bought the software Acrobat reader pro plan, but I am still unable to protect my files? How can I protect my files when tools only allows me to add them?

  Hi yaritzab46986362,

  If you purchased a plan from Pro to Adobe Acrobat Pro DC, you need to use to protect the files.

  I guess what you have opened is Adobe Acrobat Reader DC which is a free application to view and print PDF files.

  If If Acrobat Pro DC is not installed on your machine, you can download it here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Thank you

  Abhishek

• Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical users to end dry change

  Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical end users EASILY change the sections of the web site.  Can this work?  Thank you.

  I would like some ideas.

  A CMS is the standard solution in the industry today. The most common environment is LAMP (LINUX, Apache, MySQL, PHP).

  Some of us to write custom CMS systems for a living. I concentrate on CMS for retirement centers. There are all kinds of solutions CMS available ranging from generalist, off-the-shelf CMS like WordPress, completely custom, with a lot of opportunities in the meantime.