allowed data transfer and list of programs__

I am trying to install an online game that needs to access a server, when it load it just froze and did nothing. There suggestion was to ensure that he allowed to pass packets through the correct port and ensure that it was on my list of programs, how do I do and where I can find this list?

http://social.answers.Microsoft.com/forums/en-us/vistagaming/threads

They will help you in Forum games above.

And tell them the name of the game.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • data transfer and fingerprint

    I have a 450 probook Nooteboom g1 and I have a King stone flash driver 32 GB and it is new when I enter and copy data it copies slowly and my lab top is core I7 and 8 GB of memory ram and 1 TB hard drive, you can resolve this you problem and a nother question is the brilliance of fingerprint sensor drive digital validity or not? because when I put my finger it shines before or after that you know when I put a nother finger it mush red shine, but it does not work... Please solve my problems

    Hi mohamedaltahawy,

    Your Probook 450 G1 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

    Thank you

  • The Zire 31 data transfer and Tungsten E

    I am trying to get a Tungsten E to replace my broken Zire 31.  Can I easily sync my Contacts, calendar, data spending my Zire 31 office to the new office of Tungsten E and combined after installation of the software? or the installation of the new will scan all my existing data?

    Am hoping for a smooth transition without data loss.

    Thank you

    Click on the following link for the Web page of kb.palm.com for the article regarding the upgrade to a new device.

    http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=12926

    For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
    http://KB.Palm.com/wps/portal/KB/EMEA/tungsten/e/unlockedeu/home/page_en.html

    There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  • Data transfer NI653x

    Hello

    We used the NI6534 card to transfer data from our system in a PC. He works on traditional pilot and DAQmx. We use handshanking calendar for data transfer. Recently, we want to increase the speed of data transfer and need to change the "timing" of the handshake to sample clock calendar (model IO in traditional version). We got it working using the traditional driver, but not by DAQmx. I always get an error code when you try to start the data acquisition. Code error-89129 - Terminal is not valid for the device. Here is C code to configure and start the map:

    DAQmxCreateTask("",&m_taskHandle);
    DAQmxCreateDIChan (m_taskHandle, "Dev3/port0_32", "", DAQmx_Val_ChanForAllLines);
    m_numofSampletoRead = 2000000;

    continue to generate samples up to the stop.
    bRet = DAQmxErrChk (DAQmxCfgSampClkTiming(m_taskHandle,"Dev3/PFI2",20000,DAQmx_Val_Falling,DAQmx_Val_ContSamps,m_numofSampletoRead));
    specify the size of the buffer
    bRet & = DAQmxErrChk (DAQmxCfgInputBuffer (m_taskHandle, BUFFER_SIZE));

    Once he went to configuration and once called the DAQmxStopTask (m_taskHandle) function, he returned this error code I mentioned above.

    With respect to the traditional version, I just added a call to the function below and it worked fine.

    If (!) () status = DIG_Block_PG_Config (m_deviceNumber,
    m_group,
    1, / * enable the generation of model using REQ edge lock * /.
    1, / * REQ - REQ external source * /.
    -3, / * time - base 50ns, it is an internal clock * /.
    1, / * interval REQ * /.
    ((((i16) 0))) / * turn on or off the switch * /.

    Can you help me how to make it work with DAQmx? Thank you.

    Thank you, James. The example of aid. The function I called:

    DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle, "/ Dev3/PFI2", 10000.0, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000));

    I missed the first slash highlighted in RED.  I've was allowed past this function call but got stuck at the next function call, DAQmxErrChk (DAQmxStartTask (taskHandle)), that me cheated.

    Thanks again for your help.

  • Subvi in an another Subvi data transfer

    Hi all

    I have a question,

    -Does anyone know how it is possible to transfer data as a double of a Subvi to another sub - VI on the same project file with arthemetrical calculations and encodings in the screws.

    I don't want to use local or global variables. How to use refnum? Can someone help me?

    Thank you

    Alan.

    Hi Alan,

    It's very simple. Just wire the data on an indicator in your first Subvi, then make an exit using the connector pane. Call the two SubVIs in your main program to where you want that data transfer and output of wire to an entry in the other Subvi.

    Another option is to call the second Subvi in the first and just wire the data entry.

  • Updated Kaspersky and have been asked to deny/allow the following "Setup of Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

    Update of Kaspersky, it asks me to deny/allow what follows - "Installer Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

    # Kaspersky is one of the worst AV packages that you can install on your Mac. I suggest that uninstall you it. All he will do on your Mac is causing problems and offer no addition protection what so ever.

    Once you think you have managed to get rid of it, please download and install EtreCheck from http://etrecheck.com/

    Run it and post the report here. From the snapshot of your Mac, we say if you missed any bit and pieces during the uninstallation of Kaspersky.

  • How to transfer pictures from iphone to PC and keep the date, time and place

    How to transfer pictures from iphone to PC and keep the date, time and place

    Hello Grumpelfuerer,

    Thank you for using communities of Apple Support.

    If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

    Import photos and videos from your iPhone, iPad or iPod touch

    Best regards

  • Transfer all of the data files and program from old computer (Vista) to new computer (Windows 7)

    I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

    Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

    I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

    From Internet Explorer

    Original title: Transfer all data and program files from old computer to the new computer

    I've been using a Dell xps 420, 32-bit Vista since 2008. I just bought a new Dell xps-8700, 64-bit with windows 7 preinstalled. I would like to transfer all THE DATA, SETTINGS AND PROGRAMS from my old computer to the new computer. I bought a cable easy transfer of Dell for windows, xp, vista, windows 7 and 8. I read somewhere that the method of cable will transfer all my installed programs. Is this true?

    No, it won't, it will transfer personal files and settings. You will have to reinstall your applications from the original installation files or install CDs and DVDs.

    Can someone give me the better, easier and faster method available. At least give me a step by step procedure for this task.

    If you really want to move your applications to the Vista computer, you will need to buy a commercial programs such as Laplink PC Mover that will allow you to move your programs:

    Laplink PCmover® | Laplink.com

    I am 81 years old and not too computer savvy. Any help you can give will BE appreciated.   bobnancy

    From Internet Explorer

    Original title: Transfer all data and program files from old computer to the new computer

  • Slow data transfer between computer and HP Laser Jet 1320n

    I recently bought a laptop with windows 8.1 and successfully connected to 1320n times via LAN and wireless networks. Problem is when I try to print .pdf files, data transfer from my computer to the printer seems very slow and that's why it takes several minutes to print 10 pages. On the print window of my system, it tells me the data to transfer a file from pdf page 14 are about 75 MB.

    My questions are:

    1-is-normal this size of data?

    2. What can I do to increase the transfer speed?

    Thank you in advance.

    H.A.

    Thank you very much for the reply.

    I hae has solved the problem by installing the drivers that are on the product page (I was using the Windows drivers when I had the problem). Everything works as it should now.

  • PXI data transfer between OTN and FPGA

    Hello

    I have a DAQ card in my PXI and a FPGA 7813R map.

    The problem is that I send sample waaveforms of the data acquisition card to the FPGA card (which only has digital i/o) to launch my control on the FPGA. When I generate a sine wave of 50 Hz in the OTR to simulate a measured signal and send it to the FPGA through the controls in the Panel before (http://zone.ni.com/reference/en-XX/help/371599G-01/lvfpgaconcepts/pfi_data_transfer/) the signal happens on the fpga is much slower than 50 Hz indicating this folding is (it takes too much time to send the data). I tried to use this method of data transfer because my control requires only the more recent data, but it also has a phase lock loop that requires the data arriving at least resemble the original signal. Another criterion is that the control to data more up-to-date as possible. I know there is another option of the use of DMA FIFO, but I use it because I thought it would take more time to send the data, because each value must be sent.

    My questions are:

    I go about it the correct way? I know that there is the FPGA cards with analog inputs. I buy one it is because I have a large amount of differential analog inputs (20 +)

    Is there a quick way to transfer data to the FPGA. (I have converted all the FXP data before writing to the FPGA)

    Hi Jagwa,

    You should not have to synchronize the RTOS loop that written information and the FPGA VI which is read.  Instead, you can simply use a FIFO.  In RT, you can write all the data points for the FIFO, and then you can extract them one at a time on the FPGA VI and use them as needed to control functions.  In this way, the only time you need to worry about stopwatch the FPGA VI to get out the data to mimic 50 Hz.

    Kind regards

  • When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

    I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

    When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

    Is it something that needs to be reset or changed?

    In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

  • Can I partition my C: drive without data loss and transfer user files to the new?

    I have a pre-installed windows 7 Home Premium(64-bit) on a computer laptop DELL studio. Unfortunately, it only has drive C and no partition at all. Therefore, it is possible to create partitions without risk of loss of data (System and user)? If so, is it possible to transfer all the files from the user to the new one system files and all stay in C.

    Rodney

    Partitioning itself has no impact on performance. You can get slightly better performance by how you distribute folders and files on a partitioned system but I would not partition to eliminate program freezes. It's the wrong way to tackle the problem.

    There are many reasons for freezes.

    Freezes occur mainly because the task or tasks require more memory or one that is immediately available to the capacity of the CPU. The solution is to increase what is available or to reduce demand. You can do both. How to do this is much more complicated. It depends on what element of hardware is causing the bottleneck. If memory is limited, it can be simply remedied by adding RAM. If the problem is the capacity of the CPU, you will find that increasing capacity is often not practical to replace the often average CPU processor replaced motherboard, operating system and other equipment doing expensive exercise... Change the hard drive could help, but switching to an SSD is also expensive. If the processor is the problem, then demand reduction is often the way to go.

    If you are resolved to reduce the demand, it can significantly improve the performance if you delete the browser add ons such as toolbars and search engines that are not necessary. Most of the time when you install the new software you will find recommended add ons. You must learn to say no when they duplicate what you already have. Add on can hide malware, including spyware, reports how you use your computer. Do not believe the bland statements like 'works quietly in the background. It's more than one spin. Multitasking may be good, but it can provide performance problems. It translates into a surplus of supply over demand.

    Another cause of gel can be for lack of material, most commonly, the hard drive, RAM wiring associates or defective. These flaws are often easy to detect, but not always the case. You must also make sure that you have the latest version of the BIOS and motherboard drivers. They can be updated on a brand new computer if the person selling you the computer is not updated immediately before restore you the computer.

    If Frost always involves the same programs uninstall and reinstall the program, and you make sure you have the latest updates. You can also use Google to find out if others have or have had the same problem. Focus your search by using keywords, descriptions of the extracts may event viewer and limit the results to those within 12 months.  Many programs have dedicated forums where other users may be able to help.

    A gel is often the result of a malware infestation. In this case do not rely on your existing software. You need to perform analyses with software like Malwarebytes and Superantispyware. Perverse freezes may be caused by security software. Norton and McAfee are known to be involved, in particular where the computer has limited the capacity of RAM and CPU.

    Poor or no maintenance will result in poor performance. You must have a maintenance routine. This can include compaction (some e-mail programs) and should include the cleanup with cCleaner and disk cleanup and defragmentation. You must make sure that the partitions have at least 20% of disk space. You do not defragment SSDS.

    You must use the tools on your computer to look for clues as to what is happening. More you use, the more you understand what they say. The most useful tool is event viewer, although many users, it is difficult to interpret.

    You will find many sites on the internet promoting the use of registry cleaners and optimizers to maximize the performance of your computer. They are promoted by the spin and the hype. The truth is that their use causes finally grief when you use to reinstall windows to eradicate the mistakes of the system they have caused.

  • Need a PowerShell Script to list all my stores of data, capacity and VMFS format.

    All,

    I need a script to list all my stores of data, capacity and VMFS format.

    That's what I have so far but its does not give me the results I need.

    Get-Datastore - Datacenter MN_PROD | where {$_.} Type - eq "VMFS"} | Select-Object Name,@{N="VMFS version. {E = {$_.Info.Vmfs.Version}}

    Try like this

    Get-Datastore -Datacenter MN_PROD | where {$_.Type -eq "VMFS"} | Select-Object Name,CapacityGB,    @{N="VMFS version";E={$_.FileSystemVersion}}
    
  • How to list all files within a data store and sent an email...

    Hello

    I know that within a data store there of are VM, but these virtual machines are right files?

    Some might create a virtual machine, remove the inventory but do not delete the folder/VM from the data store.

    Is thre anyway to get a script to list all records, not VM. s within a data store and be able to send emails?

    Thanks for your help,

    How about something like this:

    $VIServer = "YourVIServer".

    $EmailFrom = "Sender@Email".

    $EmailTo = "Recipient@Email".

    $Subject = "email subject".

    $SMTPServer = "YourSMTPServer".

    SE connect-VIServer $VIServer

    $datastores = get-Datastore

    {Foreach ($datastore to $datastores)

    $msg = "' nFolders in Datatore:"+ $datastore. " Name + "' not n".

    New-PSDrive-location $datastore - PSProvider data store name - VimDatastore-root '-' | Out-Null

    $folders = get-ChildItem Datastore:------|? {$_. ItemType - eq "File"}

    Remove-PSDrive Datastore. Out-Null

    {Foreach ($folder in $folders)

    $msg = "' t ' + $folder. Name + "' n '.

    }

    }

    Send-MailMessage-to $EmailTo - of $EmailFrom - $msg - SmtpServer $SMTPServer body-subject $Subject

    Disconnect-VIServer-confirm: $false

    This will send an email with an output similar to the following:

    Files in Datatore: local-esx100

    Test-VM

    ARandomFolder

    MoreFolders

    Files in Datatore: local-esx101

    Test-VM2

  • This allows backup, data recovery and AntiVirus Server

    Hello

    Am new to the CWC and I wanted to know if there is an option in the CWC to enable backup, Server data recovery and install Antivirus for commissioning a virtual machine of the CWC. It would really help if someone could share some links for the same or any document available to her.

    Thank you

    Anish

    Anish, don't know if this is related to your original question, but if I understand correctly, you want to know how to configure which models are available for users to order. This first through these images through CloudSync automated discovery. Then, the supplier (CPTA) uses the portlet to manage an Infrastructure of Cloud Computing for review 'Discovered' templates/images and mark them as "Registered" or "ignore". Only "Registered" models can be selected when ordering a virtual machine. "Registered" items can be removed temporarily from the selection by putting in "Maintenance" mode

Maybe you are looking for

  • How can I stop Firefox to open a url in the Clipboard when I open Firefox?

    When I have a url copied to my Clipboard and I open Firefox, Firefox read the Clipboard and open the url instead of my default web page. How can I locate it?

  • Record Photo

    Hi all I used to be able to right-click on a photo or video attachment in an email (I use Mac Mail) and choosing "share to" Photos ("save in" or "add to"..) I forgot the exact option!). A few days ago, I noticed that this option had disappeared, and

  • problems with iPhone privacy settings

    I have the iPhone 6, iOS 9.2.1. Apps that made the request for access to the contacts do not appear in settings > privacy > contacts. I can't change the privacy settings for contacts. How to solve a problem?

  • Motorcycle G vibrates when makingcalls

    I am currently using Motorola moto g dualsim updated kit kat and when I make a call it vibrates on the success, also when receiving phone calls not vibrate room. I looked at the settings but I can't vibrate on answer or vibrate on option hang up. Can

  • What type of connectors are used with MXI-4 cables?

    I have two MXI-4 cards (PXI-8331). One in each of the two PXI chassis I have in the lab I also three MXI - 4 A-03 190957 of copper and wish to connect the cables together using connectors (preferably two mini DB9 GEF/DB9 Fem sex changing connectors o