Allowing the review process

Similar Questions

• Dangerous change in the approval process for iBooks

  you remember long time for approval of new iBooks users author books that publish their books on the iBook Store since the beginning. Originally, it was WEEKS, sometimes even months to get through the approval process. Fortunately, which improved considerably over time and now it's down to a period of 24 hours. remove your book from the store.

  I have published more than 17 books so far since the beginning of the iBook Store, and certainly, I look forward to this improvement. However, I just found out the hard way that this improvement comes with a terrible price.

  The new procedure:

  Is the approval process faster (not only) not due to more staff to go through the comments. Instead, it is due to an approval procedure has changed as it has been explained to me by the customer support. Now, the examiner spends less time going through the books to get quickly to the store. I don't know the details, but I guess they check the side more art if works and not actually reading it Word by Word.

  With this first less carefully past obviously comes a new stage. The Department for approval now takes books later (perhaps if they have more time or something) and check for any errors and delivers a ticket while your book is already on the iBook Store. In fact, at that time, that is not on the iBook Store more and this is the great potential disaster you should be aware of. If you get a ticket issued, your book get ripped the store until you propose changes and he crossed successfully a new review process, which could take days. It's wrong, really wrong, and he just happened to two of my books.

  Out of the blue, I got a ticket of the iBooks team for my book 'Logic Pro X - how it works', which lies on the line store since 2013 has been updated (and approved) last September. On one page, I had misspelled the name of "iBook" Store instead of "iBooks Store" and on another page, I got a link to the page of my book by asking readers to write a comment Amazon if they like my book. Of course, it was also a no-no (a multi-billionaire company referring to a competitor of billions of dollars with a link).

  I made the changes immediately and has the new version uploaded in an hour. But the review process took over 2 days, after I contacted support and recovery from the case. And here's the reason:

  At the moment they have issued the ticket, my book was not available on the iBook Store more, nothing, not even a mention that it is "temporarily unavailable" like Amazon. The visitors couldn't find the book, all the links from my Web site, twitter, facebook and other sites related, everything was made immediately a dead link. Not only did I lose money, I had to deal with customer e-mails explaining why they could not find the announced book. Last week, it happened with another book when I was in town for a week and had no files with me. And even once, it took 3 days to review the correction that I added 's' to the iBook Store.

  It is mind-boggling that the Team did iBook ' t think that through

  Why not keep the booking online during the update

  Why not give priority to the presentation (check two typos took longer than the initial review of the book).

  I asked the support team to issue feedback on this subject, so they can correct this procedure. In the meantime, you better watch for potential new tickets, or someone had the same problem already?

  HI Edgar,

  It's really good to know. Thank you

  Difficult to have a work around for this.

  (Got a ticket) Right now, I'm waiting for approval,

  After correcting a few minor problems.

  I hope this will get fixed soon.

  I like your idea to keep the original "approved."

  live version, until the update is approved.

  Should be a simple and logical

  changes to the procedure.

  Kind regards... Thomas

• Just passed the review of VCP510

  Very happy now!

  I arrived about 1/2 hour at first and let me take the examination at the beginning which was nice as I am really stressed out.

  They are very secure on which they leave.  I had to fill out a form that I've read the rules, got my photo taken and received a dry erasable cushion to take with me.  No phone, no portfolio.  I could keep my keys.

  I responded better that I could and the review began just after that the survey questions.  A few questions (very little) were easy, while others I had to re-read a few times just to understand what they really wanted an answer.

  You can make sure didn't you miss any of them after having obtained 85 question by pressing a control button.  It will tell you if you have missed issues (skippees by accident I guess) or if you chose only 2 answers when you had to choose 3.  You can also mark specific questions, that you are unsure about to review later.

  After the review process, I clicked on end and the system asked me twice if I was sure that I wanted to end because there was no come back after.

  Pass/fail screen appears and tells you what the score and if you success or failure and a print out would be given to you upon departure.

  I did it!

  I will now relax the rest of the day and have a beer or two.

  I took the class in line-live in August so now I guess that I wait until I hear from VMware on my certificate.

  I can't tell you how relieved I am right now

  Thank you for the forums

  Congratulations on your success

• "Error: not allowed to run the local process" during the execution of a WF in vRO7.0

  Hi all

  Need your help. We encountered a problem - "not allowed to run the local process", during the execution of a WF in vRO7.0.

  In this WF, they attempt to run the script class vRO 7.0 Server 'command. By default the Orchestrator applications having not allowed to run the command class, we get allowed by a mistake.

  To resolve this issue we need to set the system property ‘com.vmware.js.allow-local-process=true’ to the ‘vmo.properties’ properties file of the vRO 7.0 Orchestrator server.

  We already have the property to true for the properties file under ' / etc/vco/app-server " folder and after Orchestrator services are restarted. But still, we get the question.

  Another thing is that we use vRO cluster machines, so we put the real in both files to vmo.properties on both servers.

  
  

  Can you help me please how to fix?
  

  
  

  We have followed the link below.
  

  https://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.vco_administer.doc_42%2FGUID-F4995BD2-f2f7-48C0-B239-197F27FFE693.html

  Thank you

  Miloud

  Thanks llian, complete reboot of the devices/machines vRO made the resolution.

  Now everything works fine.

  Thank you

  Miloud

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie

• 'Update of the current process' of the LR5 missing exclamation point?

  Can anyone tell my why my older images (in LR 5) isn't an exclamation point asking me if I want to update the current process?

  I was just reviewing some more older. JPG files that were imported initially with Lightroom 2 or 3.   In the Panel to the point the elders 'Recovery' and 'Fill light' settings are displayed, which alerted me to the fact that the process of the most recent is not used.  If I remember correctly, he used to be an exclamation in the corner of each photo alert me to it.

  I discovered that if I right click on the pictures at the bottom of the screen, I can select "Developing the parameters" / "Update in progress", , but I found the exclamation point to be more practical.  I hope that there is a way to get this feature.

  Thanks in advance for advice :-)

  The exclamation point was changed/moved in LR5. It is now a symbol "lightning/lightning" under the histogram in the develop Module. Hovering over the icon will tell you that the version of the process, click the icon will allow you to update.

  

• How can you markup or comment on the folios in the production process?

  A question that I will meet with DPS is the difficulty in examining a folio before production. I have two ways to do it now, and both are subpar multi-step processes:

  1. the designer exports each individual article that sent me a PDF file, compile everything into a single PDF for review and I comment on that. Not a great use of time on a publication with 20 + folios.

  2. I find the publication in the content viewer, take screenshots of the pages of problem on the iPad, then transfer to my desktop via Dropbox, compile to PDF and then comment.

  Then, clumsy and timewasting on these two points. It would be nice if Adobe has integrated a comment in Content Viewer function, since one of the main missions of this application is to review/test publications.  Or, simply allow the artists to export the entire publication as a PDF from InDesign, so we can more easily use the PDF comment workflow.

  Or y at - it a better solution I just not know?

  You can put in a feature request for this: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. You can export a PDF from Indesign document, it will not however support most interactive overlays.

• When dynamically created variables are emptied in the sequential process template?

  I have a sequence TestStand 2014 in which I dynamically create and fill many FileGlobal variables in the installation section of my main sequence.  I have it using the TestStand API to read the data in an Excel file (the data consists mainly of thresholds, limits, etc.).  The methodology itself works flawlessy.

  However, there are differences in behavior when using entry points both execution of the sequential process model.  When you use the entry point of execution 'Single Pass', he has no problem in test a DUT after another.  However, when you use the entry point for execution "Test DUT", I encounter the following error after completing of DUT1 and DUT2 testing:

  An error occurred the call 'InsertSubProperty' in 'PropertyObject' of 'NI TestStand 2014 API.

  The name of the element "VariableName" is not valid because it is already in use.

  I interpret this error message means that the variable I am trying to dynamically create the DUT2 track is already present race of DUT1.  I have a few questions about this:

  1. at what point in the sequential process template are dynamically created variables flushed, such as run a further by using 'Single Pass' starts with a clean slate?

  2. is there a reminder that I can substitute such as variables to rinse after each HAD run, allowing me to dynamically create variables on each HAD, during execution using "Test UUT?

  3. better yet, is there a counter of TestStand I can query to determine if I already ran DUT1 when using "Test DUT", such as DUT2 uses the variables that were created dynamically on trail of DUT1?

  Or you can simply use the PropertyExists function as a precondition.

  PropertyExists ("Locals.Foo")

• Hi, what are all the ongoing processes in the operating system during startup itself?

  Hello

  I want to know, what are all the ongoing processes within an operating system during startup/boot.
  Why system processes are always on.
  explain on the windows registry.

  In the order:

  Google each a wisht learn you more.

  Certain system processes are required for the various aspects of the machine - there are a lot of things to allow you to move the mpouse pointer and click on this shortcut and start the process related to it...

  You need to know about the registry of windows at this time - in view of two other queries.  It's just an honest observation.

• How can I find the suspended process when the computer does not start?

  My friend (Vista Home Premium x 86 SP2) of start-up computer is more completely on its own.  I can start safe mode, and it will start successfully if I hold down the SHIFT key during startup.  I tried to disable all non-essential services and programs from starting with MSCONFIG.  I thought about allowing the boot logging, but am unsure if this will give me any useful information.  What is the best way to determine where the boot process is suspended?

  Hello

  I suggest that you try to perform the boot repair and check if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I also suggest to try a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Netscape browser to the Microsoft windows media services plug-ins to allow the download of license to play music

  Original title: music license

  How do we install m/soft media services plug ins to allow me to download the license to play music apparently my netscape browser doesn't have the plug in to allow the download

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I am experiencing this when I try to use Windows Media Player (so recent, but not easy to find the version number) to play a .wma file that I've transferred from vinyl years ago.  My browser isn't FireFox, Netscape.

  I drag the file from Windows Explorer to the playlist in Windows Media Player, and a Web page comes up (http://drmlicense.one.microsoft.com/pdrm/en/welcome.asp?challenge=AAEAATMvJkIGMMWfrmgMxKUeJkQMlzddByxvhfASAwJeI7q50r * BSeNHGXSEmuEa3z9B8i4S!) NLoR3fRr8EAGEbyzSkliIt8lX1pln9bKWLchwWDg0iXnYGPf * BCH4kZ73R5EU2098fvdrcq72igPSRA3mL31! dWNESZJZBTemAFwX6cxUcEaSTAvCODqCFOL259Pw2vPgQ4QXcChw7R2QXrI0! lLE6Q7vFzgpqyDzWpWK2hfbfr5x3rA! Bebc75l2lX3gVmq5Na & DRMVer = 1. "& embedded = false).  The page says:

  -------------------------------------

  A license is required to play this file

  The file you are trying to play was ripped (copied) from an audio CD.

  During the extraction process, the file was "protected". This limits the number of computers on which the file can be read.

  To read the file on this computer, you must download a license (a process called "license migration"). A license is an electronic key that allows to "unlock" a protected file and read it.

  To download a license for this file, click download the license .

  [Button: download license]

  .. then by some Notes.

  -------------------------------------

  When I click on the button, I get a dialog box saying «Netscape browser no not the Microsoft windows media services plug-ins to allow the download of license to play music»

  .. who's actually a dead-end.  I tried the FireFox plug-ins, but it was a waste of time.

  It's annoying, because my vinyl transfer was fair use of album, and my time is precious to me.

  -Eric

  SOLUTION: Is annoying, but switch to Internet Explorer as default browser and go through the procedure described above.  When I did, he received the license, which enabled Windows Media Player play all .wma files in the directory.  (It could be worse - the software could have go me through the process for each file separately.) Other players are still unable to read the files and it's still a nuisance.

• 4730 proBook s: what version of the BIOS allows the activation of virtualization technologies?

  I use Oracle VirtualBox with 7 VM Linux on my ProBook 4730 of s (OS is Windows 7 64 bit). Somewhere around the BIOS update F.20 my machines virtual Linux no longer works, because of virtualization technology has not been enabled in the BIOS. I tried to enable it in the BIOS settings, but he refused to be activated. So I followed the instructions to return to the correct known copy last BIOS on the recovery partition, and yet I could not enable Virtualization Technology in the older BIOS revision.

  Then I went the drivers and software from the HP Web site section for my ProBook and downloaded the revision of BIOS Feb 2011 (apparently the earliest possible review of BIOS for my laptop model) and then flashed my BIOS with this revision. And virtualization technology setting STILL refused to activate it.

  I've seen in this thread in HP forums:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-ProBook-4730s-BIOS-cannot-enable-virt...

  anyone else with the model of my laptop had the same problem and the same symptoms: VMs worked up to a point in time and at that time there the Virt. Technology implementation option in the BIOS could not be reactivated.

  So my two questions are:

  Any available for this model of laptop BIOS revision allows the activation of the option of setting of virtualization technology?

  and,

  In the event of a revision, which one is it and can provide you a link where I can find a downloadable copy of it?

  LTW

  OK, after you call the tech support of HP, I found the answer to my version of this problem. When I tried to activate the virtualization technology in the BIOS, I was logging in BIOS using my account in the BIOS. At least for me (and probably for others too, since it is advice from HP support gave me) it was bad. You must log in with the account Guest User of the BIOS BIOS, and when you do, a lot of parameters of the BIOS, including virtualization technology, can be turned on/off. So my problem is solved.

• Don't allow the computers in the domain to connect to the WLAN

  I'm going in circles here.  First of all, I apologize for posting this question if it has been included in the past (if you have another thread to offer, I invite you to point me to it!)  I did a little research on several forums and articles and support sites.  But I'm missing something.

  I work with HP Procurve 420 access points (they bought these before starting.)   I have Cisco Secure ACS for windows 4.2 installation.  I have configured the external database group mappings to active directory and vlan assignment by group dynamics.  I have install the certificate from the ACS, and CA is our own ca on our network server.  Users can successfully authenticate and connect to the vlan appropriate right now.  That's where I'm stumped.  I want only our computers to connect.

  1 how/what/where can I go from here if I want only to allow computers on our domain to connect to the connection wireless company?   Set up some kind of another certificate that gets distributed by GPO or something?  Or is there something in ACS I can change?

  2. What is the ACS certificate, I already installed on the ACS server do?  Is it encrypt the authentication process that takes place when a user establishes a connection?

  3. How do you guys did this on your own networks?  I go about it the wrong way? What do you suggest me?

  The final goal is that I want a user with a laptop of society must be able to connect to the wireless network and to authenticate and to be placed in the appropriate vlan (which works now), but I won't be able to do it with any device, I would like to some how manage and restrict computers can connect.  Help, please!

  1. I think that you can use the group mapping (see page 603 of the ACS 4.2 user guide) to use the domain computers group.  Deny access to any other group (via the No. Access Group)

  2. to the Spiderbeam of each EAP conversation, the ACS server will provide the certificate as proof of who he is.  If the client trusts the cert, then the client will continue authenticatin process.  It's how you help ensure that your clients connect only to your network.  If you configure clients to ignore the cert, and someone else is a network with your SSID, your customers can try to connect.

  3. many companies to complain about not being able to contol that devices connect to their networks.  It is a way to do it.  By simply using PEAP with user accounts, any portable computer iPhone/iPad/staff / anything that can connect to your wireless network, if the user knows how to set up.

  If go you ahead with this, please post back and let us know how it works.

• Is there a utility that will give me a list of all the programs or processes loaded in the startup process?

  There must be some sort of utility that will allow a user to view and edit, what programs or services that load during the startup process. In my case, during this process, a screen will appear that says; "cannot find the program. Skipping Autocheck. I need to eliminate what it comes to store the boot process.

  There is Autoruns , but it can be dangerous because it shows everything so use at your own risk

• I probed to "Always allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

  I was probed to always select "allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

  How can I reverse the error?
  Concerning
  JollyJ

  Without doubt blocked by any firewall you have installed, that being the review of the cases of your firewall settings that relate to this program