Allowing the use of UEFI in Firmware on a Pavilion P7-1235

Greetings.  I'm trying to get the firmware in my Pavilion P7-1235 to recognize my hard drive and DVD drive as UEFI supported devices.  I'm looking to do this so that I can install Windows 8 (64-bit) with the support of GPT.  This will allow me to have more that 4 MBR partitions supports.

The system is installed with Windows 7 (64-bit), and I believe that Firmware acknowledged the two features of UEFI support.  But since I wiped the drive in order to perform an installation of Windows 8 own/release to date, both devices no longer appear as 'UEFI Supported' devices in the firmware.

In addition, when I press "ESC" during the initial start-up and attempt to select "Run UEFI request... ', nothing happens.  Through reading, I'm guessing that this is happening because I deleted the "HP_TOOLS" partition on the disk.  But I don't know if delete this partition is also the cause of my lack of support UEFI.

Any help or advice would be greatly appreciated.

The score of "HP tools" is UEFI support and removing it causes your problems. If completely erase you the disk, rather than selectively wiping, you also deleted from your HP Recovery partition. I hope that you have already created your HP recovery disks so that you can recovery your computer to a factory State if necessary. Running the recovery discs HP can restore the partition HP Tools support and UEFI. If that does not do it, you may need to contact HP Customer Support to solve your problem.

Tags: HP Desktops

Similar Questions

  • BIOS update allows the use of modules of 2 GB RAM DDR on Satellite P10 554?

    Hello

    I have a satellite p10 554 and want upgrad my RAM.
    By default, the maximum that you can install's two Kits of GB 1.
    Are there any - update Bios, that allows 2 GB kits?
    Thank you very much!

    Ron

    Hello Ron

    The same situation with my P20! Unfortunately there is no BIOS update allows the use of the RAM more.

  • Impossible to change the Windows Media Center guide to allow the use of ot TV relay stations (translators)

    Live TV with Windows Media Center, where RF channels are different from that of the guide because of the distance TV translators (relay Stations)

    Cannot change the guide to allow the use ot (translators) television relay stations where the RF TV channel is different from the current station. For example, Station POLO6N is 9 RF channel in Eugene, OR, but here on the coast, it is the 35 RF channel. Zip code for our region apparently points to the station itself RF channel and the number of 1092 is shown and dimmed so that it cannot be changed. How the inputs of channel can be modified to adapt to this situation? Here on the coast, we're out of range (mountains, etc.) of the station itself.

    BH

    I have apparently discovered a way to watch and record live TV using Windows Media Center where the geographical area is served by the translators of the TV and the.

    If you configure the TV channels using only NOT the guide and using Add missing channels feature to add and configure the channels you use before you download the guide, you can set the actual RF frequencies of TV translators serving your area. In my case, I had to add the letters TD after the call signs of stations so that when I load the guide, he be to point to the current channel.

    After having added all channels and before loading guide, check the reception using the function designed to help you in the pointing of your antenna. Then load the guide and your channel configuration is retained and stored in a file pref.xml which apparently replaces the channels.xml file created by the loading guide.

    Unfortunately, detailed documentation on the product missing apparently (help files I found only State to follow the guests), or I didn't find it. In all cases, you can use Windows Media Center to watch and record live TV if you live in an area served by the translators/TV relay stations with different channels channels over-the-aor real real TV stations.

    If you find that you need to change a channel, use channel add rather than the function Edit channels, clear the X in the box and start over with this channel.

    BH

  • The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8

    Hello

    I hope you can help.

    I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.

    ERROR: An error has occurred (code 0 x 80310060):
    Group Policy settings do not allow the use of a PIN code start. Please choose a
    other BitLocker startup option.

    I tried to change local policy settings...

    1. Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
    2. Open the key require additional start authentication
    3. Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN

    .. .but always not the same error.

    Help, please. He drives me crazy!

    Hello

    Thanks for choosing Microsoft Community to post your question!

    According to your description, it seems that you have problems with activation PIN code on startup.

    Refer to the suggestions from this link and check.

    http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/c3b5e90d-89fd-4e95-AF97-723b045eb41b

    For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

  • IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

    IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

    The activation servers have been closed several years ago. See Adobe - CS2 downloads

  • 6 fusion allows the use of the onboard graphics on the retina MBPro?

    Fusion 5 requires the use of the discrete graphics chip on the MBPro retina, which decreases battery life. 6 fusion allows the use of the onboard graphics instead?

    Yes, a third-party application such as gfxCardStatus is necessary to control that the GPU is used in conjunction with VMware Fusion, as it is by default go to discrete beginning / containing a virtual Macine.

  • ColdFusion 11 allows the use of MS Access 32-bit data sources?

    ColdFusion 11 allows the use of MS Access 32-bit data sources?

    Well well, my first rhetorical question: is 2014, why MS Access? MS SQL has free versions that are much faster and more stable than any version of MS Access, I have no problem of migration.

    Now to your question, 32 bit "should not be a factor." 64-bit applications can talk to most 32-bit applications through an API without too much difficulty. The only exception that I know are 32-bit applications that rely exclusively on the DLLs for their API - I don't "think" MS Access has this limitation. It was probably at least 15 years since I touched what whatsoever in dealing with MS Access so my hesitation to be clearer in my response. Good luck.

  • Indesign allows the use of the underscore character style in automatic numbering? How to solve it?

    [In a table] I would like to use paragraphs numbered [in the first column] but ID does not allow yo use a style of ch to get the background for the number (below)

    (In addition, the cells have different heights)

    Isolate the problem, it seems, what ID here allows to not do.

    The number disappears but appears later. But it is difficult to work like that if some change is needed to the renumbering)

    new.jpg

    .     .     .     .     .     .     .     .     .     .   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .

    Mandatory:

    forum1.jpg

    A little awkward, but you have so it with a drizzle of adjustable section on column width. Add dashes if necessary.

  • Why not "item 10 only editor" allow the use of Nik Software plug-ins?

    I was very happy yesterday when I noticed in the Apple App store a version of items called "Item 10 only editor" was for sale.  Since I never use the Organizer is perfect for me.  Unfortunately, it will not Nik software plugins to install.   There are no "plugins folder" included.  In every other sense, the "Editor elements 10 only" version is wonderful.  Load fast, tracks clean and fast and is just something wonderful and something that I was hoping would come along the years.  I can't believe that adobe does not allow for the use of plug-ins.  Looks like I've lost only $80.

    Any suggestions or alternatives to allow plug-ins to use?

    This editor version only 10 has nothing else than the application icon.

    Yes, he does. This screenshot is the only version of the editor of PES 9 and I am 100% sure THAT PES 10 is the same. They are on the INSIDE of the application itself.  Right-click and choose show package content.

  • NB305-N410 - what application/driver allows the use of F # to toggle keys?

    NB305-N410wh - what application or driver allows you to press the function with a key of "f #" to toggle different features listed on the F keys #? (For example, turn on/off wireless with FN + F8?)

    I have reinstalled my system bottom upward, created the flash drive which contains all the drivers toshiba and apps, but can't seem to find the one that controls this feature.

    Hi zathrak,

    What operating system you are using?

    If you are using Windows 7, you need to install the package of added value and utility to Support Flash Cards. The two you can download on the Toshiba site.

    I had a similar problem, and after installing the FN keys worked again! :)

  • Pavilion 563w running XP CD/RW no longer allows the use as re-writable disc

    My CD/RW used to allow me to format a CD Virgin and read and write the files to and from it like a diskette using DLA.

    After a disk failure hard and reinstallation of XP DLA no longer works. The files are still there but the property is no longer present

    "Use with DLA" checkbox which appeared. I've tried everything I can think of to... Help.

    Have you tried to read this document of support and installation of DLA 4.6?

    http://support.HP.com/us-en/document/bph07940

    If you right-click on the icon for the drive in my computer, there should be a DLA tab if it is properly installed (not just a checkbox). If this is not the case, the ALD is not necessary. You should be able to read and write to CDRW using Windows XP with off DLA. Click the recording tab, and then select Enable CD writing on this drive.

  • UCCX 8.5.1 SU4 NFR kit allow the use of SQL database

    I'm running UCCX 8.5.1 SU4 thanks to the NFR UC 8 kit for my laboratory training and cannot create a DSN to a MSSQL Server. When I go to

    Subsystem | Database | DataSource

    and then click Add, the driver dialog box is grayed out and will not be open to select a jdbc driver. When I go to UCCX Serviciability, Control Center Network Services, and then expand engine UCCX then manager subsystem, the subsystem of the database is status "not configured" and did not start.

    I thought that the kit NFR providing the premium license would allow database capacity, which escapes me?

    Thanks, Jeff

    DB subsystem requires premium.  And I think that the NFR kit is premium.  Double you can check your license under system > AppAdmin license?

    Also, you acually don't have download a JDBC for UCCX driver?  If you do not, then it is probably your problem.  UCCX comes with zero drivers installed, and you will need to search the Internet for one.  Most people end up using it for MS SQL:

    http://sourceforge.NET/projects/jTDS/files/jTDS/1.3.1/

    Anthony Holloway

    Please use the meaning of the notes to help the great content in car to the top of searches.

  • App for Apple Watch series 2 allow the use of heart rate, gps, and manual splits?

    I run about 60 miles per week and I plan to change my Garmin Forerunner 620 for a series 2. However, it would be totally useless to me if the watch does not intermediaries, as many of my workouts are pretty accurate. So, is it possible for me to intermediaries on the watch, and when looking at the splits also see the GPS info and heart rate for the said stock split?

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can see that an application of third party best suited to your needs.

    To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

  • Outlook express does not allow the use of hypertext links... said I need to contact the systems administrator

    I use a vista program and recently I have not been able to use my hyperlinks in Outlook Express.  When I click on the link of the message says something like «action has been limited...» Contact your system administrator.  I have no whizard in this area. Some might direct me in this case.

    Outlook Express was last used in XP. CrystalBall told you use Microsoft Outlook.
     
    You receive an error message when you click a hyperlink in Outlook
    http://support.Microsoft.com/kb/310049 
  • Allow the use of more than 4 GB of RAM on 32-bit Windows

    Hello, I am running Windows 7 32 bit on a computer that has more than 4 GB of RAM (10 GB to be exact), but I understand that Windows 7 32 bits by default can only use 4 GB of RAM. My processor No. Execute (Data Execution Prevention) active and PAE (physical address Extension) also active. Although it seems that EAP is that the rest of my RAM visible and not usable (which makes me question why something as useless as that would be understood as a feature). Is there anyway I can get Windows 7 is therefore able to use all of my RAM? I would prefer a solution that won't let my totally unstable system but nothing will work.

    Hello, I am running Windows 7 32 bit on a computer that has more than 4 GB of RAM (10 GB to be exact), but I understand that Windows 7 32 bits by default can only use 4 GB of RAM. My processor No. Execute (Data Execution Prevention) active and PAE (physical address Extension) also active. Although it seems that EAP is that the rest of my RAM visible and not usable (which makes me question why something as useless as that would be understood as a feature). Is there anyway I can get Windows 7 is therefore able to use all of my RAM? I would prefer a solution that won't let my totally unstable system but nothing will work.

    Hi tjratis20,

    The link below will give you a pretty good idea what exactly the EAP.

    https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366796 (v = vs. 85) .aspx

    Upgrading to a 64-bit operating system would increase significantly the amount of memory available. See the link for Windows memory limits below.

    https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx

Maybe you are looking for

  • Finder crashing on macOS Sierra

    I have a late 2009 iMac Core2 3.33 GHz, 8 GB RAM processor. After the installation of macOS Sierra, Finder crashes constantly on me. I have to restart about five times a day. Get beach balls when you click on an external drive or a folder. Get beach

  • Satellite U400: Various uncomfortable questions - rundll, programs etc. of closing.

    I have a laptop Toshiba U400 brand new which started to play up. When I try to open a document using a program for whichI navigate on the computer - and not one assigned to the document, if I click on 'Browse' the white on the box and I get the messa

  • What happened to my Time Machine backups?

    I'm on Yosemite on a 2012 end Mac mini server, with an external HARD drive, I use for backups. The short version: I can "enter Time Machine" see my backups, but after restoring my system, my Time Machine configuration seems to have been lost and my T

  • Former Motorola customers, sign here...

    After this complete fiasco with Motorola and the 2.1 fail, I'd like to see (and they have to see) how the current owners of Motorola will be closing their loyalty. Please log in if you intend to never buy another Motorola product.

  • Internal webcam does not work, but the microphone does

    I have a Toshiba Satellite C655-SP5183M and whenever I try to use my Webcam it says that it does not work.  I looked in the drivers, and it says that the Webcam is not plugged, but it is an internal webcam.  I have re-downloaded the software, but tha