Allows a HP Deskjet 3050 cable a

Similar Questions

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• Deskjet 3050 a problem change from USB to wireless

  I got a Deskjet 3050 a printer attached via the USB port of my desktop HP Win7 64 bit for a year and a half. Attempts to convert the USB wireless. Instructions lead me the start--> all programs--> HP--> HP Deskjet 3050 J611 series a--> convert USB wireless.

  But when I open--> series HP Deskjet 3050 a J611, my only choice is:

  Connect a new printer or

  Add new software

  Nothing on the conversion of wireless USB. If I click 'connect a new printer' I have the choice of:

  USB connection

  Connection Ethernet / wireless

  Connect again later

  If I select wireless connection, it tells me to connect the USB cable. It is been connected for more than a year. But the button "Next" is gray and I can't move forward.

  If I select USB connection, it tells me to connect the USB cable. It is been connected for a year. The only choices I have are to return to a screen or check a box that says I'll connect it later, not now. I don't have to check but the 'Skip' button is gray and so I'm stuck again. I tried to turn the printer power off and moving the USB cable to the USB port of different desktop and power on printer again. I tried to reset the default printer on the printer control panel. The software does not believe that the USB is connected. This is the case.

  I pressed the button on the control panel of the printer wireless. It flashes blue.

  I'm usually pretty good with the resolution of this kind of thing, but I'm ready to break this piece of scrap on the ground and dance on his grave. .. .any help would be appreciated. Thank you!

  Hi Julie,.

  Thanks for the reply, sorry for the frustration. Here's what to do to uninstall it, in a more detailed form.

  • Click on the link above to access the driver removal tool.
  • Click on download and run.
  • Click 'Yes' when asked if you want to allow the following program to make changes to the computer.
  • A folder opens, look down and you'll see 'uninstall_l3' - select it.
  • The uninstall is running and restarts your computer.

  Now, it is normal to go forward, and then reinstall the printer.

  I hope this helps you, let me know how it goes!

• How can I configure a Deskjet 3050 a/J611 to my Chromebox?

  HP Deskjet 3050 J611 a.

  -Installation of the printer, and once, he printed the alignment page.

  -Went through the menu of the printer, but it has no option to print the "Backgrounder". All I could get it to print is the configuration sheet, who has no listed email.

  -Went to set up the printer in the Google Chrome browser settings, but just me links to HP site.

  -No instructions on how to use this printer with a Chromebox/Chromebook in the manual. HP offers Linux drivers, but never on their drives, but the Chromebox not the CD, of course. And wow, is that printing is really small for my eyes to 50 years.

  -Says it is connected wireless and printing confirms that, even if I also have the USB cable connected to the Chromebox.

  -Google offers no support, just pushes me on the HP site, who asked me to connect using my "new email eprint.

  What do I do? Thank you!

  The problem is that this printer is set up via the USB port, or something called automatic wireless. The autowireless configuration requires a windows or mac computer to connect.

  The alternative is the WPS configuration method, if your router supports you in the menu on the printer wireless, there should be a WPS option, and then when you have pressed OK than thr push button on the router. This allows to bind together the two devices, and the printer will have a full connection.

  There is another alternative, but it can be hit or miss.

  In the menu of the printer wireless, it takes an option to restore the default settings, select it.

  Soon in your chromebox if you look at available networks, you should see a network for your printer, probably scored something like HP-printing-3050, connect to that.

  In your web browsers address bar type in 192.168.223.1 - it should load a Web page for the printer.

  Here you should be abl to go to the top network, then wireless on the left, there should be a wireless Assistant to put your network name and password.

  After that, you should be able to get information page for web services, and then use google cloud print to print from the chrome box.

• DeskJet 3050 J610a - unexpected wireless connection problem.

  Running:

  10.7.4 MacOSX

  HP software: HP_Lion_Ink_SW_v12.13.17

  Printers: Deskjet 3050 J610a worked perfectly via a wireless connection

  MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,

  [Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".

  So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.

  Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as

  "HPJ610a.047DED", Type: computer network computer. It is also detected with.

  ' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.

  I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).

  As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.

  I need the wireless connection!

  Thanks in advance.

  Okay, well, I think that a different router can only solve this problem dead.  Consider an Apple Airport Terminal.

  If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link).  So, naturally, you shouldn't be able to get on the Internet with this arrangement.a

  When you run the HP software (Finder - go to Applications-> HP-> -> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable.  He who does not?

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• HP Deskjet 3050 J610a ePrint questions

  I have a HP Deskjet 3050 J610a printer that is listed as being capable on the list of HP AirPrint compatible printers and ePrint.

  However, I can't a Web Services tab at all when you access either the printer via its IP address or in the printer menu.

  I can't find an update of the firmware on the support of the printer section and have had no response from HP email warranty covered. Can someone help get this job, I can print wireless easily from the main engine, it was installed on, but can't see the printer and any apps ePrint AirPrint apps. When printing the configuration pages any printer ID or e-mail address is printed. As active poster on the section of Microsoft Web services.

  The HP support pages only to see Help information about the ePrint for Photosmart printers and Officejet, Laserjet, Designjet even though they support Deskjet.

  Any help is greatly appreciated as this is starting to annoy me now...

  Hi all

  The matrix management model has been updated! DJ 3050 has been replaced by the 3050 a DJ, plus additional models were added.

  One more thing... If you have the mobile device (iOS, Android, Symbian) and a DJ 3050, you have a printing solution. You can install the free application of HP ePrint home & Biz. This app will allow you to print to ~ 200 models of different HP printers, including the legacy networking and HP printers compatible ePrint.

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi

• HP DESKJET 3050 HAS WI - FI...

  Hi guys

  IM brian and im happy to be on the HP forums... I look forward to use the forums with you guys... Anyway here is the deal... I bought the printer HP DESKJET 3050 wireless all in one printer yesterday and a that I had no problem connecting to the printer to my main (via usb) pc I have seem to have, wireless connection problems

  I need to install software provided to all laptops and pc computers, which will be connected to the HP printer wireless?... and if not how to connect laptop computers to the printer

  my router is a 'BT HOME HUB 3.0'... and I understand the advanced features of this... but theres nothing in the advanced settings that allows me to add this printer... when I did the set up on the small screen printers it asked me to insert a key in my hubs... configuration settings that I can't

  can someone help me with this... I will connect at the start than a laptop (my wife) and it works on windows 7 ultimate... any ideas,

  Bravo guys

  Hi brianthesnail,

  Wireless security is configured in your router. You will need to connect to your router and the configuration of your wireless security encryption. Refer to your routers user guide to make changes to your router.

• Cannot print to Deskjet 3050 a photo

  DeskJet 3050 has with Win 7 64 bit. Computer Nonnetd to the router via the wire and the router next to the printer.

  Can not print photo via print or windows photo viewer. He said printing but the printer does nothing.

  Can print word and web pages.

  Trouble shotting attempts did not work:

  Restarted printer and PC

  Re-installed driver.

  Checked McAfee wirewall setting does not block the printer

  Need help as soon as POSSIBLE (my PC has only USB 3.0 ports with cable is out of the question)

  Looks like you may have a driver conflict.  Try a different printer driver.

  Another printer driver

  Let me know how it goes.

• Scanner will not connect to my printer HP deskjet 3050

  I recently bought a printer HP Deskjet 3050 all-in-One series, scanner copier J611 a.  My operating system is Vista 64.  I received the error message is "Scanner not connected to the computer."  Everything worked, and then all of a sudden the scanner no longer works (print and copy of the works).  I tried to use the printing HP and Dr. Scan to try to solve the problems, but it did not help.  I also tried other solutions I found on the HP site.  Finally, I just uninstalled and reinstalled.  It did not help.  I can still print and copy but will not scan.  I need the scanner, more than anything I have an another printer/copier HP that I can use.

  I tried to analyze using the Wi - Fi connection but couldn't. I have not tried to use MS Paint. I saw in another thread, the proposition that, using a key USB cable might work and I tried it and it worked. It's a little embarrassing, but the key is that I can scan now. Thank you very much.

• ePrint does not print the deskjet 3050 a spare

  I have deskjet 3050 a and unable to print attachments. text is ok but no pdf, excel, photos etc after research I know that the pdf files is not oversized.help please

  Hi there, if you try to print from a laptop to the printer you need not send attachments e-mail to the e-mail address of printers, you can simply print via regular HP printer software driver. DJ 3050 has installed on the laptop? If not, here is a link to where you can download Windows 8 driver for your system, simply select the correct option (32 or 64 bit) for your operating system http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061092&

  If you want to be able to print from the laptop to the printer when the devices are not on the same network or if you do not want to install the product software, you have the option to install the software driver ePrint. This will allow you to print files from applications on your laptop (Adobe, MS Office, etc.) to your printer ePrint enabled even when they are on different networks. See this link for more information and a download link

  http://h20331.www2.HP.com/hpsub/us/en/eprint/overview.html

  Hope this information helps.

  Best