Almost no storage on USB of the Satellite C40-C-10 key q

Similar Questions

• For the Satellite C660-A219 function keys do not appear

  For the Satellite C660-A219 function keys do not appear... I formatted my laptop and installed a new Win 7 after that I lost... function keys. Please help

  Have you installed version of Win7 or recovery image original Toshiba that you got with your Toshi?
  Did you install additional package from Toshiba?

• Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

  I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

  (1) turning off SecureBoot (which I did)
  (2) putting USB at the top of the list of starting the computer.

  But it does not work.

  I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

  Hello

  Great that you are using Linux on your PC!

  You mention that you have disabled the secure boot.
  It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

  Most of the distros must support UEFI but that can't be true for each of them.
  If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
  If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

  Another clue could be to take the USB key and try to start another PC from him.
  Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

  If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

  I hope this helps!

  Tom BR

• Noise all using any device USB to the Satellite L655 - 19H

  Some time ago I bought the laptop Satellite L655 - 19 H.
  After say 2 or 3 weeks of use, I realized that sometimes it makes strange noise - like whistle not very strong, or something like that. Then I realized that it depends on the use of usb devices, when I plug in usb-flash Cards, keyboard, mouse, webcam no matter what usb device - this noise appears.
  Gave my phone for warranty service, they have repaired more than 1 month, then gave me the diagnosis - problem with the motherboard, the motherboard replaced.
  But the problem is always the same, the same noise. Is not too strong but after Let's say 5 hours near this large moskito makes crazy ^^.
  So I have two questions:

  1. everyone knows what this noise could be connected to? I am not an expert in the field of electronic devices, but spoke with a friend of mine, he said, it could be related to damaged transistors or defective to the Manger-usb or something, this is perhaps true?

  2. How can I check the serial number of the motherboard that has been installed on my device, when it was produced - I want to check the warranty service guys have really done anything, and they just kept my laptop 1 month in stock and then said, he fixed, man.

  Thanks for your help and best regards.

  Very interesting question.
  Have you noticed the same behavior with or without adapter?

  # I think you're the first person on this forum who has this strange issue reports related to the use of external USB devices, so I don't think it is a general problem
  # This can be problematic. Have you checked screws at the bottom of your laptop? They are like a new or it is visible that your laptop has been opened?

  What you can try is to communicate with other services and ask to check again.

• Port USB of the Satellite L30 stop Windows when using

  I recently bought a Satellite L30 (psl33E) for my wife and everything seemed fine. That was until she needed additional usb ports for his stuff and used the port on the left side of the machine (as opposed to the one still in use, in the back). As soon as she tried to use this port in particular, the close dow and has done since then.

  Could someone tell me please how to fix this, because it is only a few weeks old, and I don't want to take it back to the store where it was purchased.

  In the hope of a miracle.

  TIA.

  JimmyMack.

  Hello

  It really looks like a serious hardware problem. I guess that the USB port cannot deliver enough power when other ports are in use.

  If I were you I bring the machine or contact the nearest available service partner in your country and allow them to correct this problem.
  Here´s a link to find the closest of the ASP available in your country: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  See you soon

• How to install Windows USB on the Satellite L50D.-c 10.

  How to install windows 10 usb?, model L50D-C

  https://www.YouTube.com/watch?v=psPWQy3-5B0

  Might help u

• On the Satellite L650-116 product key recovery

  Hello

  I am owner of laptop Toshiba Satellite L650-116. I bought my laptop with Windows 7 Home Premium 64 bit (OEM license) original. Unfortunately I am forced to reinstall my Windows 7 system, but I realized that my product key sticker is wiped out (I can't recognize any of the numbers). I don't know if I have the recovery partition (I know there is a way to reinstall Windows, if you have this partition).

  Are there opportunities that I can restore my product key without having to buy a new one?

  I would be grateful for a quick response!
  Greetings,
  Edyta.j

  Hello

  At first, I have to tell you that this product key that you can see on the Microsoft sticker doesn't help. This product key belongs to the original version of OS you have with your machine, it cannot be used to activate Windows if you install your own version.

  First try to install the original recovery, if possible. How it works, you can read on - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Please post comments.

• Windows XP Home on the Satellite Pro L650 - FN keys do not work

  Hello everyone!

  I have a problem with my laptop. I have satellite L650 pro Windows XP and then install drivers and utilities hotkey. But the hotkey buttons do not work. (fn + f5 and others)
  What should you do?

  Hello

  I think that the installation of the Hotkey Utility is not enough
  As you can read in other forum threads you must also install Toshiba common Modules.

  So please check again the Web from Toshiba site and download/install the common Modules. Then retest FN keys.

  I hope it works :)

• Connectivity to the Satellite M30X USB problem

  Hello everyone,

  I have a problem with the USB to the Satellite M30X connectivity. I purchased a M30X and had problems with connecting devices of differnet in one of the USB ports.

  I tried to solve his problem and but nothing resolved.

  Goodbye, Meier

  Hello

  Rudi is right. There is a new update of the BIOS and it should solve the problem of USB.

• Blue screen with DVB - T USB TV tuner comes with the Satellite A100-165

  Hi all

  I have the Satellite A100-165 with PX1211E - 1TVD USB DVB - T TV tuner (TV savvy). I think the installation is OK because I can watch TV on my PC!

  But occasionally PC reboot with blue screen! :-((Je pense qu'il lorsque le niveau dele de signal TV est inférieur)
  I update the driver warned with the version I found on the Web from Toshiba site: savvytv-udvbtt - 10180629.zip
  But it's always the same!
  You have an idea about this problem?
  I can agree to have a bad display when the signal quality is lower, but it is very annoying to often have a blue screen and PC reboot!

  Thank you in advance on your help
  Best regards

  Hello

  I think that this can be corrected with the latest display driver. Please visit the Toshiba download page and install it.

  If the problem is fixed, please write again.

• USB 2.0 on the Satellite 5100 603?

  Hello

  I had to reinstall my laptop with the original recovery CD
  on Windows XP Home Edition. I ran the updates.

  Because I used several USB devices, the system tells me that
  I have to connect this device to a USB 2.0 to get the fastest
  connections.

  I'm sure that I've never had these messages before.

  Does not support my 5100-603 improved USB?

  OR

  What drivers should I download and where?

  Thank you for your help in advance.

  Oliver.

  Hey Oliver

  These messages are nothing unusual if you connect USB 2.0 devices to broadband to a laptop with USB 1.1 port.
  Yes, as much as I know Satellite 5100-603 supports only USB 1.1 and not 2.0 USB ports
  This is a limitation of the phone hardware and may not be updated with all the drivers.

  I imagine that get you t has not all messages in the past because Microsoft QFE updates were not installed.
  In any case, nothing wrong in you unit.

• Can't get webcam Chicony USB 2.0 to work on the Satellite A200

  Hi all

  I noticed that other people have posted messages asking for help on this subject. I have problems in the webcam integrated on my laptop model Satellite A200. There are no icons in what concerns this camera and I'm puzzled because the manual doesn't even mention the camera.

  There is no link in the menu all startup programs. I tried the solution suggested in the forum to add this as a USB but the phone said that there was a mistake. I'm not the person more computer in the world and I would be grateful if someone wants to be good enough to post a step by step guide on how to get this on camera. It seems to be a common problem for those of us with the A200 so it would be great if someone could help.

  Thanks in advance

  Helsfeas if you use the pre-installed Windows Vista you will be able to find the installer for your webcam chicony under the C: don't / drivers directory Toshiba which must be in your hard drive. If you run the installation program you will get an icon in your bar of tasks and on your left, follow a pop up window that can turn on your camera and put effects on it.

  If you have downgraded to WinXp please tell me if I can send you on the program, as I recorded it before the mine downgrading to XP.

  Hope I was of any help...

• BlackBerry 10 cannot delete the notification of "almost complete storage device.

  Dear users,

  I got 8 notifications of "Almost complete storage device" less than an hour today. I deleted some files and released ca. 5GB successfully. (It was Nobex download new episodes I didn't listen and they kept piling up).

  Now 8 notifications sitting in my Hub unread - I can't delete it or mark it read. The opening, they all say "this message cannot be opened.

  I restarted the hub. I restarted the device. Notifications still not sit to read and cannot be removed [no error on delete].

  I want to get rid of unread notifications. Any thoughts are welcome!

  If you press and hold the side bar should pop open then press the trash.

• Cannot connect the usb on the UBUNTU 14 client storage

  Good evening. is a little of temp I of understand how connect one usb key for my customer VMware - view -client.
  I searched on the internet but there is a lot of information and I could not even understand how I can fix this.
  I attach the log file to riga76 tells me () May 13, 17:05:46.795: vmware - 6025 | view.bin ( CdkViewUsb_Init: () vmware- view -usbd is running?)
  What does this mean?

  Hello

  Thank you for your answer, but I managed to solve the problem.

  I downloaded a package on the HP site where the inside was the installation of the orizone view. I unpacked the. Deb and I have copied the file vmware-view-usb in the path-usr-bin of my installation directory. I drew the 4775 permissions and you are done.

• Flashing BIOS R830 Satellite on the Satellite R630

  I have a version of Bios R830 - 1GZ 3.70 THIS Version 1.50
  And also a R630 - 138 BIOS version 2.20 THIS Version 1.60 (this is the most up to date for this discontinued model version).

  The elders will recognize my WD Storage for what it is--it is an external HARD drive. And the boot in the bios shows below the HARD drive priority internal - that is what you expect for a correct operation.

  The last (R630) will always attempt to boot from storage of WD. It does not show the WD HARD drive in the list of Bios Boot priority.

  I can't continue to disconnect and reconnect the USB in the R630 - but it's a nuisance. I don't know that the problem down to the BIOS is not quite new. What would be the likely result of the turn signals version 3.70 - designed for the R830, on the R630?

  I expect to be told that he will make the inoperable R630. These laptops are very similar, so I hope someone might have a more promising response.

  Thanks for your help

  First of all:
  You can download only from the page driver BIOS Toshiba UE Toshiba victory.
  This means that you can update the BIOS only when running windows system.

  Second:
  It is not possible to update the BIOS R830 on the R630 since there is a protection which break the process flash because of compatibility issues.

  Thirdly:
  You could damage the laptop if you would try update BIOS wrong (perhaps using the traditional version of BIOS, USB version, etc.)
  So it is really bad, bad idea, that