Alpha 12, Neuwarp Windows switch

Similar Questions

• installation problem of alpha Centauri on windows vista

  I'm unable to install alpha Centauri on vista

  I run the installer, but nothing happens

  Hello
  Do you have an error message when you try to install?
   
  There is currently no information about compatibility with Windows Vista to alpha centauri. It may or may not be compatible with Windows Vista. Clickhere to check.
  However, you can follow the steps and check:
  Step 1:
  You can try to right click on the file setup.exe and "run as Administrator".
  
  
  Step 2:
  If worked well in Windows XP, I suggest that you run alpha centauri in Windows compatibility mode .
   
  If it still does not work, I would say that you contact the manufacturer of the game for a better support.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows switches mode 'sleep' and is now stuck at 'update 27 of 105.

  Help, please!  Last night, I closed my laptop and he told me it was going to continue to install updates.  105 ofr them.  I have not thought very well no problem because I was going to bed anyway.  So I close the lid and go to bed when he was to be updated on 27.  When I opened this morning - a full 15 hours later, it was still updating the 27.  So I waited and nothing happened.  It has not frozen as the blue circle turns again.

  I turned off and removed the battery and then lit it back to see he's trying to return to the update of the 27.  So I tried from the laptop in safe mode and now it says "update configuration" but in a lower resolution. fun.  Is it possible that I can start windows and circumvent the updates?

  Hi Rab_Random,

  What Version\Edition of Windows you are running on your computer?

  Step 1: Run system restore and startup repair, you can follow the steps mentioned in the article below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  (See method 1 article)

  Step 2: Delete the file pending.xml via the system recovery command prompt

  (As in step 1) access system recovery options. You can also check out the link below

  What are the System Recovery Options?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Go to the system recovery command prompt and run the following commands

  ICACLS c:\windows\winsxs\pending.xml/grant administrators: F

  del c:\windows\winsxs\pending.xml

  Once the command is executed successfully, check if the problem is solved and let me know

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows switches mode standby when you connect

  Old desktop computer goes into sleep mode when someone is trying to connect.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  I also suggest you to optimize Windows XP for better performance and check if that helps:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Windows switches from startup repair

  My laptop is a Dell Inspiron 1545. When I turn it on it goes directly to the recovery of windows page when I click on 'Start windows normally' it starts but just before the login screen, it becomes black.  When I click on "launch Startup Repair tool" it loads Windows files, but then I turns black for a little while that the blue welcome screen and a cursor appears, but nothing.  How I please suggest something.

  KandyKane-1

  Original title: Windows startup

  Hi Kandy,

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  
  

  Try to run repair to start the Windows recovery environment (WinRE) and to do this, follow these steps:

  1. Insert the Windows installation disc in the disc drive, and then start the computer.

  2. Press any key when the message press any key to start from the CD or DVD.
  If your PC does not automatically detect the media

  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.
  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.
  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.
  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.

  3. Select a language, a time and a currency, a keyboard or input method, and then click Next.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.

  6. in the System Recovery Options dialog box, click on repair your computer.

  7. click on the operating system that you want to repair, and then click Next.

  8. in the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Keep us.

  Kind regards

• windows program will rearange themselves when the monitors are in mode 'sleep' - how to stop windows switching screens

  IV has 3 screens on a map via display port adapter and a 4th on a second card in order to have a 1 on top of three parameters.

  the computer itself does not sleep because I have servers running but I put screens on standby after 10 minutes.

  for a long time, all screens would go to sleep and wake up without any problems... in the course of the last months, 2 questions.

  1. once the monitors to sleep and no consistent time 1 monitor wakes up enough to show the backlight, but no display... wake up ok and sometimes screens dislocated.

  and

  2 when the monitors have the power save / standby mode, some of the Windows I had open will have been moved to different monitor as monitors have been disconnected or "detected" numbers have changed and I saw the change number several times as well, but not always.

  I say some because I have 4 windows open on my left most monitor and 2 of them end up on my right monitor after the glitch.

  Sometimes things on my low Center {main} will end up on the top of the single monitor page.

  no rhyme or reason... a few days no problem at all don't wake up and everything is where it should be and all the screens have slept through the night

  for all the tech info

  ATI 5750 and 5770 in mode xfire w / 1displayport/DVI / HDMI/DVI 1 / 1 DVI.

  and ATI 5450 to the top of the monitor page

  Windows 7 x 64 / 8 core AMD8320 / 16 gig mem.

  latest video drivers...

  any info?

  I'm a tech and iv been scratching my head for a while on this one

  thnx in advance for reading even to see my problem

  thnx even more for an answer... lol

  Hello

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• On Windows 7, why open windows switching when a key is touched?

  I have a big problem with Windows 7.   WHENEVER I TRY TO USE ANY PROGRAM, REGARDLESS OF IF IT IS JUST POST A NOTE IN MY SOCIAL NETWORK OR JUST ANSWER MY E'-MAILS, THE WINDOW IN WHICH I WORK, WHEN I TOUCH ANY KEY ON THE KEYBOARD, THE WINDOW FLASHING, AND FAILOVER TO THE OTHER DESKTOP, START BUTTON OPCIONS OR ANY OTHER BROWSER WINDOW THAT CAN BE OPENED ALSO.   IT IS BECOMING VERY FRUSTRATING BECAUSE I CAN'T TYPE IN PEACE ANY MESSAGE WITHOUT THE COMPUTER INTERRUPTING ME EVERY FEW MINUTES.  I WISH REALLY DO NOT LIKE MUCH THIS WINDOWS 7, MICROSOFT HAD KEPT WINDOWS XP!

  I USE A DELL VOSTRO 35550 WITH WINDOWS XP MODE AND ALSO 7 OPERATING SYSTEM.

  LOOK FORWARD TO YOUR RESPONSE, BECAUSE THIS PROBLEM IS DRIVING ME CRAZY!

  WITH OUR THANKS,

  Maria M. Maduro

  Hello

   
  1 did you changes to the computer before the show?
  2. who is the antivirus installed on the computer program?
   
  Method 1: Clean boot
  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:
  Run a virus scan on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
   
  Method 3: Temporarily disable the antivirus software and check.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Firewall: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  
   
  I hope this helps.

• CF9 Windows switch from 32 to 64 bit license?

  I've seen some previous, old, comments on this subject, but most were specific to special editions (trial, edu, etc.) of the CF.

  I will be upgrading the server currently running CF9 of 32-bit Windows to 64-bit Windows.  Therefore, it makes sense to put a 64-bit version of CF on it as well.

  I think that the CF9 32 bits that is currently running on this server * could * be a version upgrade.

  Can I download the CF9 64-bit distribution and install it on the 64-bit Windows after the upgrade and use the same serial number that I am currently using?  Or I have to buy something to make this happen?

  Thank you

  -reed

  Yes, you can use your existing license. There is no separate license for versions 32 bit 64 bit vs.

  Dave Watts, CTO, Fig Leaf Software

  http://www.figleaf.com/

  http://training.figleaf.com/

• Acer Alpha 12 und Bluetooth switch

  Hallo zusammen,

  seit kurzem kann ich unten uber die Schnellstartleiste nicht mehr deaktivieren Bluetooth.

  Wenn ich im Geratemanager schaue means are EIB Bluetooth USB Gerät, dass der Treiber deaktiviert ist.

  Wenn ich unten im Schnellstart deaktivieren will be kommt nur das Bluetooth Menu. Auch da geht nichts auszuschalten.

  Hat heute simply as. DAS Hat noch problem someone? Mist der Akku ohne Ende saugt.

  LG

  HM bei mir lag're wohl am Bitdefender.

  Uninstalling ging nach're wieder. The victory of Das hab ich noch nicht evil bisher update

• Switch Windows user option does not work

  Windows Switch User Option is not Working.please help.if, anyone can remotely my computer please solve my problem.ihave tried myself to resolve according to the method of microsoft but failed.please response and solve my problem quickly.

  Hi AbdullahEjaz,

  1 find the computer on a domain network?

  2 did you do changes on the computer before the show?

  I suggest you to refer to the following articles and check if it works.

  Fast User Switching option is not available

  http://support.Microsoft.com/kb/280758

   

  A discussion on the availability of the fast user switching feature

  http://support.Microsoft.com/kb/294739

  Let us know if that helps.

• I'm looking for "switch between windows" in windows 8.1

  I use Windows Vista for some time and will now to start using windows 8.1, I am looking for the small icon that tile your windows diagonally in Vista. It is located on the taskbar next to the show desktop icon. I will try to attach an image of the icon.

  Is this possible in 8.1?

  Thanks for any help :)

  You can.  There are also a few additional options that you can use also.  In Windows 8, you can point to the top left corner of the screen to see your latest app (click to go to him).  If you want a list of all applications you have used recently, drag the pointer down to the corner and complete is displayed in the view.

  If you want the old style back, here's how: http://www.eightforums.com/tutorials/10135-window-switcher-shortcut-create-windows-8-a.html

• Lack the "Switch between Windows" button in my Quick Launch toolbar

  From: Daz 150969

  I don't have the button tab in the taskbar in order to operate the Aero of the computer part. My card under windows is 5.9. I can run aero if one press tab, ctrl and windows key and it work very well, but I think that there should be a button on the tab in the taskbar?

  From: Andrew McLaren

  The "Switch between Windows" button in the toolbar quick launch is enabled by a file called "Window Switcher.lnk" in your Quick Launch folder. If this file is missing, the icon does not appear in the Quick Launch toolbar.

  You are probably missing this file and need to replace it.

  You can get a copy of the original file here:

  "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk"

  This place is normally hidden in Explorer (you won't see it).

  To put it on your own toolbar quick launch, go to a command prompt and enter these commands (replace "" with your real username, of course!  :-) -

  C:\>CD C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  C:\Users\launch \AppData\Roaming\Microsoft\Internet Explorer\Quick > copy "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk.

  You should see a "1 file (s) copied" message when the file is copied successfully. Then type "exit" to exit the command prompt.

  The "Switch between Windows" icon now needs re - appear in your quick launch menu.

  It will be useful,

  --

  Andrew McLaren
  amclar (at) optusnet dot com dot to the

  Another response of the community of Windows Vista discussion groups

• Windows Vista mixer does not switch windows

  I use Windows Vista 64 bit on a laptop of Ed. When I first bought my laptop 4 months ago, it worked.  I have the windows switcher icon in the taskbar, but when you access the Windows I have open turn out.  I get a box on the screen with all the windows open as an icon instead of the windows open, floating on the desktop, so you can scroll through them.  I tried to go to the "customization" and "windows color and appearance ' and that 'windows aero' is selected and clicked OK and apply, but it does not work.  When you try to "switch" I always get the box in the middle of the screen.

  Help and thanks.

  Libtech

  Hello

  Try to update your display and video driver using the methods below.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Alienware Alpha i7: Windows 10 upgrade with keyboard and bluetooth mouse problem

  Hi, after I upgraded my Alpha to 10 Windows x 64, the sytem lost connection to my keyboard and mouse bluetooth (both Microsoft, ironically).

  In the bluetooth Setup screen, the devices of just no longer appear.

  Unistalling the driver HID keyboard and restart has been recommended in many forums. I have not seen a change. Is there anything else I can do?

  TIA

  Hello

  You have probably the Intel 3160 ADAPTER Bluetooth 4.0 or the Intel 7265 ADAPTER Bluetooth 4.0. Try to reinstall the driver for your system and restart the computer.

• Macro switch window mouse no longer works on Windows 8

  I have a simple macro to switch window I've used for years on Windows 7. Here is the content of the file macro mhm , produced by Centre of keyboard and Microsoft mouse:

  
   56
   10
   15
   10
   15
   10
   56
  

  As you can see, it is a simple Alt + Tab sequence. It works fine on Windows 7 (and in a computer virtual from Windows 7 on my new machine Windows 8), but has no effect on Windows 8. I tried the "Next window" option, with mixed results (he has a bad habit of jumping to the window, as if cycling through each window open; and it does not work with the new Windows Store applications).

  How can I get the simple Alt + Tab feature works on Windows 8? Thank you!

  I just bought a Sculpt Comfort Mouse. Unfortunately, I couldn't reproduce nubi2kof macro on the mouse and keyboard Centre 2.3.

  I guess Alt + Esc as S3rgio suggested mapping, works for most people. You can do this on the mouse and keyboard Centre 2.3 (without using AutoHotKey), although...

  The problem with Alt + ESC is that it does not work with Metro applications and you cannot switch between two applications, as you can do it with Alt + Tab. So I ended up doing an AutoHotKey Script to try to imitate the behavior of Alt + Tab and the mapping of the mouse for this shortcut key (Win + N in my case):

  #n ::

  AltTabTimeout: = 2000
  SleepBetweenKeys: = 10
  DesktopClass: = 'WorkerW. '
  If (A_PriorHotkey = A_ThisHotkey & A_TimeSincePriorHotkey)<>
  WinGetClass, activeWindowClass, A
  If (activeWindowClass = DesktopClass) {}
  inverse: = 1
  } else {}
  If (reverse % = 0) {}
  AltTabCount: = ++ AltTabCount
  } else {}
  AltTabCount: = - AltTabCount
  If (% AltTabCount % = 0) {}
  inverse: = 0
  }
  }
  }
  } else {}
  AltTabCount: = 0
  inverse: = 0
  }
  Run C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk
  Sleep, SleepBetweenKeys %
  Loop, % AltTabCount % {}
  Sleep, SleepBetweenKeys %
  SendInput {Tab}
  }
  Sleep, SleepBetweenKeys %
  SendInput {return}
  return

  I hope this helps...