also. I have an acer aspire I wish to set. running vista. e recovery is in poor condition. you want to restore to factory settings. no password...?

all about

N °

We can not help you with your forgotten password problems or eRecovery.

Contact Acer and ask them about eRecovery, because it is their software.

http://support.Acer.com/us/en/default.aspx

And ask them if they still have the Vista recovery disk for your model

http://us-store.Acer.com/RCD/

Some manufacturers have more available Vista recovery disks.

If this happens, you may need to try this instead:

You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

Other manufacturers recovery DVDs are should not be used for this purpose.

And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

"How to do a clean install and configure with a full Version of Vista '

http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

And phone Activation may be necessary when you use the above installation method.

"How to activate Vista normally and by Activation of the phone '

http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

See you soon.

Tags: Windows

Similar Questions

  • I have an Acer Aspire 5735-4774 laptop which runs Windows Vista. Whenever I close my laptop, my computer restarts its self.

    I'm trying to find a solution to the problem. I tried including virus cleaning disc and other analyses, but I continue to have these problems. This problem did not begin until recently. I restored to a restore point previous to the first time it happens, but its still on me once again. any help would be helpful, thanks.

    Hello

    Control Panel - Power Options - Choose top left - close cover.

    Also, check the settings of Plan change for power Plans and Advanced Options for each.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Have an Acer need 2 GB of RAM, running VISTA, upgrade to WINDOWS 7, this what can I buy to do this? __

    ACER is the 160G drive

    You can buy a copy of a upgrade Windows 7 Home Premium, professional or ultimate edition of your store local tech. At soon emm386 - Microsoft Partner

  • I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

    I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

    Sasha,

    What browser (exact version). ?

    Harold Horne MVP on September 24, 2012

    0x8024400a

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. on start and then click Run.

    2 copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281>

    You may be unable to access the Windows Update of Windows XP Web site.

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack

    http://support.Microsoft.com/kb/322389>

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure

    http://support.Microsoft.com/kb/875364>

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717>

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

    This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

    The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

    You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

    Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

    Install it.

    Reset.

    Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

    Back - let everyone know if it worked for you.

        

    UTC/GMT is 14:12 on Sunday, October 28, 2012

  • I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work.

    Acer Orbicam has stopped working

    Hi, I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work. Can someone help me?

    Hello

    ·         Were there recent changes made on the computer before the show?

    Follow these methods and check if that helps:

    Method 1:

    I suggest you run the Microsoft Fixit tool and check if it helps:

     

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Try to install the latest drivers for webcam on the Acer support site and check if it works.

    http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=44

    Note: Be sure to select the operating system like Windows XP before downloading the drivers.

    You can also check with the Acer support for all known hardware related issue:

    http://support.Acer.com/us/en/default.aspx

  • I have an acer aspire 3690 and I am trying to restore windows xp to its factory settings how to do that

    I have an acer aspire 3690 I am trying to restore to factory settings and is only let me go back to a certain date all I want on that, that's what org. came on the computer and the internet I do not have any disk

    Page 28 of the manual of your system describes how use the built in Acer eRecovery Management software to restore your system to factory settings.

    Doing so will scan all your personal data and when you did, I think you need to configure your Internet connection again since the factory settings are unlikely to know everything about your current installation of Internet.

    If you experience a problem with your system, I think I would fix rather whatever is the problem, but here's what Acer has to say about it:

    The manual is here:

    http://support.Acer.com/us/en/product/default.aspx?modelId=5

    This article reads as follows:

    Recovery and restore features allow to restore or restore the system
    a factory default image, leave a user created image or previously
    created backups of CD and DVD. You can also reinstall applications and drivers for your Acer system.

    1. press on + or select Acer eRecovery Management of the
    From Empowering Technology toolbar to start Acer eRecovery Management.

    2. position yourself in the restoration and recovery page by selecting the button restore.

    3. Select the point of backup you want to restore from. You can also
    choose to restore the system from a factory, to retrieve a default image
    already created CD/DVD or reinstall applications and drivers.

    4. follow the on-screen instructions to complete the process.

  • I have and Acer Aspire 5516 with 1.6 ghz processor. But his run at only 800 mhz. How can I fix?

    I have an Acer Aspire 5516 with a processor AMD Athlon (TM) TF-20, 1600 Mhz, 1 Lossnay, 1 logical processors
    The processor is supposed to be clocked at 1.6 ghz. But it is only running at 800 mhz. What can the steps I take correct this problem? Thank you

    Probably something wrong with your path. Try

    %SystemRoot%\system32\wbem\wmic cpu get List

    Also type

    path

    and report what he said. And type

    dir %systemroot%\system32\wbem\*.*/a/s

  • I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

    I have two Acer Aspire laptops.  They are totally frozen because of the virus.
    I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
    I have to rebuild my laptop.

    Hello

    No - what are the two Acers come with a recovery disk?

    If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

    With an Acer, you press Alt + F10 at startup to start the recovery process.

    All data are lost when you do the above.

    And for the lost disc, contact Acer and ask them to send you recovery disks.

    They do that for a small fee:

    http://us-store.Acer.com/RCD/

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 arrives

    I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?

    Hello

    1 are there any changes or updates made on the computer before the show?

    2. you try to add a network printer?

    3. What is the full and exact error message?

    4. when exactly you get the error message?

    5. What is the number of brand and model of the printer you are trying to connect?

    Method 1:

    I suggest you check out the link and try sharing the printer:

    Share a printer

    http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

    See also:

    Network printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Method 2:

    Check out the links and check if that helps:

    File and printer sharing: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

    Troubleshoot file and printer sharing

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  • I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

    I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

    original title: Netbook Windows 7 problem

    New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

    Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

    Make an image of the DVD, you can use a program like ISO Recorder to do.
    http://alexfeinman.com/

    If you don't have a Windows 7 DVD to borrow, try to upload a picture:

    32 bit
    http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

    You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

    Utility delete EI.cfg allows you to use a product key
    http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

    You can create a bootable USB stick with the following:
    Download Windows 7 USB/DVD tool
    http://store.Microsoft.com/help/ISO-tool

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    They will give a confirmation ID, enter it

    Click next to complete the activation.

    Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

    http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

    Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

    Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

    Reactivate the installation, you may also do it by phone:
    Activate Windows 7 manually:
    1. click on start and in the search for box type: slui.exe 4

    2. press enter on your keyboard

    3. Select your country.
    4. Select the telephone activation option and brace yourself for a real person.

  • Hi there I have an acer aspire one and I have a problem with my wireless connection.

    Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

    A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

  • I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

    I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

    You can buy or download a copy retail Microsoft windows and install it on your computer.

    You can download and install the device driver windows for your computer to Acer support website.

  • I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

    I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

    See if this helps:http://www.sevenforums.com/tutorials/66482-memory-set-maximum-amount-used-windows.html

  • I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

    I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

    My system (Windows XP) will make use of the new speed of the upgrade card?

    If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.

  • I have an Acer Aspire 5542. Since I was Windows 10 MyWinLocker Yo-Safe will not open.

    Hi, I have an Acer Aspire 5542.  It came with Windows 7, and had MyWinLocker Yo-Safe pre-installed.  Since I upgraded to Windows 10 MyWinLocker Yo-Safe will not open.  After I entered my password in the window of MyWinLocker Yo-Safe he said Yo-Safe is open in a small window pop up at the bottom right of the screen, but Yo-Safe will appear in the window of this PC, and the overview of the tray icon still says it is closed.

    I found the answer: open an administrator command prompt and then type in: sc mwlservice start

Maybe you are looking for