Alternative for Portege Z830 power Chargers

Similar Questions

• Where can I get support for Portege Z830 Recvery?

  I had the computer three months again.
  The msata ssd drive failed.
  I think it's a bad situation for a device without moving parts.

  I live in a regional area and told me that the computer should be sent for repair that would take a considerable time. I needed the computer so I bought a new msata and reinstalled windows from another copy, I had.

  I lost of course now windows and drivers etc, who were on the recovery of the msata partition.

  Anyone know if I can replace them?

  At first, I must say that you should not waste your time and send your Portege Toshiba service provider as soon as possible. They must replace SSDS. The warranty is valid, and it will cover all repair costs.

  Anyway, to download drivers, visit Toshiba download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
  Original recovery media can be ordered on http://backupmedia.toshiba.eu/

• Portege Z830 - cannot access page drivers Win 8

  Hello

  I had a problem to reach the drivers page for my http://www.toshibamea.com/downloadwindows8drivers.aspx?pageid=3311 region
  whenever I choose all the options and click search it gives me an error on the Toshiba site and it lasts for more than 5 months, he's in the uk page

  Also when the pilots of windows 8 will be available for Portege Z830 pt224v?
  It is available for other models

  Visit please http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Select your laptop model and use the OS option > Win8 Upgrade. 36 drivers, tools and utilities appears.

  Check it out please.

• Portege Z830 - BSOD, windows XP Setup

  Hi guys/girls,

  Been trying to install windows XP on this machine to an internal user, unfortunately we have this machine to use XP. However, I get a blue screen during windows XP Setup.

  I downloaded the AHCI drivers for windows XP on the toshiba site and load them during the installation of windows XP, but get the same blue screen.

  We also loaded into the bios and tried to change the mode of the sata to IDE controller, but it is greyed out and we cannot change it (I think it is in the ssd, but I could be wrong)

  IM currently stuck right now and don't know how to proceed, there are windows XP drivers available on the Web site for this computer toshibas but I can't get installed it, there must be a way to install it.

  Hello

  > I downloaded the AHCI drivers for windows XP on the Toshiba site and load them during the installation of windows XP, but get the same blue screen.

  What Z830 Portege do you have exactly? I check the page pilot European Toshiba drivers Win XP for Portege Z830 but did not find a?

  Are you sure that you have downloaded the driver AHCI compatible?

• Portege Z830-10F no display - power light flashes

  Hello

  I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
  What it means?

  (PC was left alone in the night on table)
  I try to disconnect the battery and load without it, it did not help.

  Indicator DC IN (first on the left):
  Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

  ((Deuxieme power light to the left):
  Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

  Also try this.
  Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
  Now connect the battery and AC adapter and turn on the device.

• Portege Z830 - issues after updating Windows for Win 7

  My laptop is PORTEGE Z830. I upgraded the system to Windows 7 Enterprise. I got this yellow (!) when I opened ad peripheral printers. When I tried to know what unit he showed:

  Pilot missing: ACPI\TOS6028\2 & daba3ff & 4

  Also, I am not able to adjust the brightness and sound volume using 'fun' key more.

  More I don't know how to get to Bluetooth more?

  can someone help me?

  I put t know not what drivers you have installed and then lacking here are detailed installation order then please make sure that you have installed the things listed in order:

  Windows 7
  ConfigFree
  TOSHIBA Assist
  TOSHIBA security assist
  Infineon TPM professional package
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel AMT software
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  Synaptics Touch Pad Driver
  LAN driver
  Wireless LAN driver
  Atheros Bluetooth driver filter package
  Bluetooth Stack for Windows by Toshiba
  USB3.0 Driver
  Ricoh card reader
  Technology of quick start Software Intel
  TOSHIBA fingerprint utility
  TOSHIBA Value Added Package
  TOSHIBA Service Station
  TOSHIBA eco Utility
  TOSHIBA PC Health Monitor
  TOSHIBA Disc Creator
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  Assistant TOSHIBA Bulletin Board
  TOSHIBA Network Device ID registry tool
  TOSHIBA wireless LAN indicator
  TOSHIBA HDD/SSD Alert 90
  PatchFiles PCIIDEREG - 1.2
  PatchFiles FixFPService_REG_1.0
  PatchFiles TosVolRegulator_1.1
  PatchFiles TBMINITREG-1. 0 t

  Please check and post comments.

• Portege Z830 - USB power off power on reboot

  Whenever a reboot is performed (for example, from Windows or CTRL-ALT-DEL to the start-up of the PC) on the Z830, power to all the USB ports seems to be turned off for a few seconds, before then come back. Is it possible to avoid this behavior and keep the power to the USB ports during the restart?

  Hello

  I put t know if its possible, but please check if the Sleep and Charge feature is enabled in the BIOS or Toshiba HWSetup.
  If you won't see a difference, Oh well, I guess that it s is not possible

• Portege Z830-10N Windows 10

  Hello

  I see it on the table to display Toshiba Portege Z830-10N is not able to be upgraded to Windows 10 why is - this? The laptop is not that old, and the system is quite high spec as far as I know. I tried yesterday and it has been initialized to offshore, but without any reason. Can someone let me know why?

  I thank... Paul

  Have Z830.

  Recently upgraded to Win10 after invitation to Microsoft to improve the system. The process was smooth, but in the end got 5 unknown devices in the system, including Web camera. So goodbye video Skype.
  More functional keys work but only OSD system (windows) are displayed - don't know how power 3D modem for example.

  First impression of Win10 - no real advantage compared to Win7.
  If not find a solution for my problems in 1-2 months - will return to the registered system.

  Someone managed with 10 windows on Z830?

  Good luck
  AK

• USB 3.0 issues with Portege Z830 & Renesas electronic drivers

  Hi all

  I have a Toshiba Portege Z830. Until today I have use any pendrive USB 3.0 external. I bought a Kingston HyperX, but when I try to use it, the port recognizes the drive, but disappears in a few seconds...

  Also when I use a port USB 2.0 back, it displays the unit, but it cannot read the contents of the USB drive.

  I checked in internet forums, and I see similar cases, but not a clear solution...

  More information:

  1. the disc works if I restart windows on SafeMode (Windows 7-64 bit)
  2. the disc works on other computers (without electronic drivers Renesas).

  I think it's a problem of Renesas electronic drivers, but I've updated, installed the modern version, power usb change, etc. but no solution...

  This ultrabook is an expensive appliance, as well as the USB key, and of course, this should be a solution...

  Thank you for your help

  Hello

  I downloaded the latest 2.1.28.0 USB 3.0 v driver available from the Toshiba UE driver page.
  The fichiers.ini (64 bit driver) contains information that this USB 3.0 host controller driver is developed by Renesas Electronics Corporation.

  I read a lot about the problems of USB 3.0 as part of different devices to USB 3.
  The questions are not related to a specific manufacturer for laptop or device in most of the cases it s a compatibility issue between the two devices, I think that's most of the time impossible to test all USB 3.0 flash drives, HARD drive, etc. with different controllers USB 3.0 for compatibility problems always seems

  I found a 3rd party page where you can find a few other drivers USB 3.0 of Renesas and NEC. But the use of these drivers is at your risk and perils do not know if they work properly.
  http://www.station-drivers.com/page/Renesas.htm

  I think you might have to force windows to use the specified driver, then first choose "Browse my computer dethrone" and then "Let me pick from a list of device drivers...". ». This must be done in the Device Manager.

  Would be interesting to know how it works

• Battery discharge even if Portege Z830 is off

  I have a Toshiba Portege Z830-10F.

  I have a question and a question about the consumption of the battery while the PC is turned off.

  Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level decreased significantly (10-15%).

  I even had the case where, after a period of 3 to 4 days, long weekend during which the aircraft had not been in service AT ALL, I could not reboot the computer, because the battery has decreased.

  I had to plug in and then start it.

  This seems rather odd and strange and would so whether there is a specific setting had to be changed so that it does not happen.

  I upgraded to the latest version of the Bios (v 1.40) and that doesn't change.

  I look forward to your help and your support.

  Stephan

  > Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level has declined significantly (10-15%).

  This can result from certain options enabled in the BIOS.
  For example option Wake up LAN or keyboard or power of dough at low level to use even if the laptop is turned off. Disabling this option might help with this problem.

• Portege Z830 - 11J - several questions after Win8 Pro upgrade

  Hello

  I bought a Portege Z830-11J with Windows 7 Pro.
  I bought the Windows 8 Pro Upgrade and did a very basic * clean installation *.

  I installed the Windows 8 Pro from scratch a (empty) disk.
  I checked for missing drivers Device Manager.

  I did a download for * Windows 8 * drivers with my serial number.
  I extracted only the drivers for the device and didn t installed all the additional software.

  I installed the drivers from package 3grdv-20120119182104 H5321gw
  I installed the drivers of the fingerprint of the fp - so package - 20121025114331
  I installed the drivers from package bltstk-20121015121744 bluetooth stack

  all drivers and windows 8 are 64-bit.

  The installation of windows has no update and the power management settings are by default.

  After 30 minutes, the ultrabook goes into deep sleep, led power mode fading slowly. all right.

  Sometimes the ultrabook wake up, if I press the power button and all is well.

  * BUT not to every time the ultrabook will wake up! **

  If she woke up, the Black Guard screen won´t, there is no video on the VGA port.
  The keyboard lights up if press and that s all the.

  If I Don t to power down (press power button very long), the hot get extrem ultrabook to the position of the cpu.

  Can someone help me with this problem?

  BIOS is 1.70

  Help...

  Hello

  I agree with Akuma, some Windows 7 drivers are compatible but many drivers Win 7 problems to Win 8.

  In addition, you should try to turn off the laptop, press Windows key + X and then choose stop.

  The point is that Win 8 be hybrid mode if you n t press Win + X key so that closing.

  Here's a tip:
  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help

• Portege Z830 - 10 H - battery is not detected

  I have a Portege Z830 - 10 h for a month and have battery issues lately:
  -It will detect no battery and only works on an external power supply;
  s ' there is a battery, it's not load - a message says '3% available, load', it lasts for hours and finally available toll-free.

  I found some ideas for removing the battery and BIOS by default in this forum, but it is a ultrabook and I have no access to the battery. I tried the reset of the BIOS by default, but nothing has changed.

  Any ideas before I go to the VAS? Thanks in advance.

  In my opinion there is nothing you can do about it. Contact the nearest Toshiba service provider and ask for help.
  Why do experiments and wasting your time here. You paid your new laptop and it should work properly.

  Request for replacement of the battery.
  Do you know how to find the nearest service provider?

• Bluetooth kit wide Portege Z830 - 11 X

  I bought your new Portege Z830 - X 11 and connected my mouse (logitech) bluetooth to the computer.
  However, after I restarted the computer, the connection was lost and since then, the computer indicates the power of bluetooth is disabled (even though I am pass it on (and market), all connections switch once, and etc.) using fn + f8 keys. all drivers say they work well, but the bluetooth is disabled since then.

  It is really strange. Did you install additional software for BT?

  Try to roll back the BONES in an hour earlier before starting to use this mouse BT, just to see if something will be changed.

• Portege Z830-M110 - need to make an ISO of my Windows 7 - How to file?

  Hello world

  Would you please let me know for the OEM to Windows 7 64 bit on my Portege Z830-M110, how can I make ISO file?
  I need to reinstall my Windows on a new SSD. I need to remove the current one and re-install WIndows again. I need to have the Windows CD that I don't have. My Windows is pre-installed on my Toshiba laptop that I bought in 2012-2013.

  I noticed that I can browse "Toshiba Media recovery Creator". I have the file on my laptop but it is not installed. I went through the drivers, but there is no software to download and install to make this option active. I noticed there is a download of the utility on the Australian website with 2.1.5.5109 version for PT225A - 00400G rather than my PT224E-01001YAR and I do not know if I have to install that!