Always addressed E1500 DHCP default gateway for hotspot :(

I have an ADSL Modem with built-in router to which the E1500 is connected via Ethernet.

If I choose 'Automatic Configuration' for the connection setting internet on the E1500 can I enable DHCP on the E1500 but the gateway it gives to the customers is always that of itself (192.168.1.1). The bridge, it should be is the ADSL Modem (192.168.1.254).

If I choose "bridge" Mode I can not yet activate DHCP.

Is there a way I can use the DHCP server?

N ° do not use the DHCP server on the E1500. You can use it if you use it as a router. You want to use this access point. Enable the DHCP server on your ADSL modem.

Also use the bridge mode.

Tags: Linksys Routers

Similar Questions

[Advanced] Is it possible to put the IP Address of the default gateway for a vmnet NAT?

I am trying to duplicate a computer lab on my Mac environment, and I need the bridge will be located at one address other than VMWare wants to implement. I know how to create a static IP address for a virtual machine, but I need adjust the routers option in Library/Preferences/VMWare Fusion/vmnet2/dhcpd.conf. Will there be a networking Library/Preferences/VMWare Fusion/to allow this? Is there something I can put before or after the "DON'T CHANGE" section dhcpd.conf that replace the parameters in this section?
Except that, is there a way to prevent the re-writing of the dhcpd.conf file after I made a change to VMWare? I tried it wrong in various ways, including the re - generate the hash SHA1 of the networking file and reset the modification time of the dhcpd.conf to the original time, without success.
Here are my current settings:
subnet 10.10.0.0 255.255.0.0 subnet mask}
range 10.10.128.0 10.10.255.254;
option broadcast-address 10.10.255.255;
option domain-name-servers 10.10.0.2.
option domain-name localdomain.
by default-lease-time 1800;                # default is 30 minutes
Max-lease-time 7200;                    # default is 2 hours
option netbios-name-servers 10.10.0.2.
routers option 10.10.0.2.
}
host vmnet2 {}
Hardware ethernet 00:50:56:C0:00:02;
fixed-address 10.10.0.1;
option domain-name-servers 0.0.0.0.
option domain-name ";
routers option 0.0.0.0.
}
And I'm changing the gateway to 10.10.0.2 to 10.10.1.250. Maybe VMWare requires that the first IP address as the host and the second either the entry door and rewritten if not?
Thanks in advance,
Dave

I found a way to do this. Not sure if it's official, or if it will continue to work in the future. In addition changes nat.conf, if you simply duplicate the part of the section "DON'T CHANGE" dhcpd.conf below, then the second version of the settings will cancel and replace the first. Here is my solution:

# Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet2.

#

# This file was generated automatically by Setup of VMware.

# See Instructions below if you want to change.

#

# Define us domain-name-servers to satisfy some DHCP clients

# (dhclient such as configured in SuSE, TurboLinux, etc..).

# We also provide a domain name to the pump (Red Hat 6.x) happy.

#

# VMNET DHCP Configuration. Beginning of "DO NOT EDIT ARTICLE" #.

# Instructions change: this section of the configuration file contains

# News generated by the Setup program. Do not change it

# section.

# You are free to change to everything else. In addition, this section must start

# on a new line

# This file will get saved under a different name in the same directory

# If this section is edited and you try to set up DHCP again.

# Written on the: 04/11/2015-21:15:15

allow unknown-clients;

by default-lease-time 1800;                # default is 30 minutes

Max-lease-time 7200;                    # default is 2 hours

subnet 10.10.0.0 255.255.0.0 subnet mask}

range 10.10.128.0 10.10.255.254;

option broadcast-address 10.10.255.255;

option domain-name-servers 10.10.0.2.

option domain-name localdomain.

by default-lease-time 1800;                # default is 30 minutes

Max-lease-time 7200;                    # default is 2 hours

option netbios-name-servers 10.10.0.2.

routers option 10.10.0.2.

}

host vmnet2 {}

Hardware ethernet 00:50:56:C0:00:02;

fixed-address 10.10.0.1;

option domain-name-servers 0.0.0.0.

option domain-name ";

routers option 0.0.0.0.

}

# VMNET DHCP Configuration. End of "DO NOT EDIT ARTICLE" #.

subnet 10.10.0.0 255.255.0.0 subnet mask}

range 10.10.128.0 10.10.255.254;

option broadcast-address 10.10.255.255;

option domain-name-servers 10.10.1.200.

by default-lease-time 1800;                # default is 30 minutes

Max-lease-time 7200;                    # default is 2 hours

option netbios-name-servers 10.10.1.250.

routers option 10.10.1.250;

}

-Dave

get the address of a default gateway

Hi all

I saw a TCP library function that can get the address of the host. but someone do it now, how to get the address of a default gateway?

for example

192.168.0.4 IP (this ip address can get according to get host address)

subnet 255.255.255.0

Deault gateway 192.168.0.1

B.R

Gerry

Hey Gerry--

To get the default gateway, you'll want to use the IP Helper Win32 API. Unfortunately, this part of the Win32 API is only available for users of the full package LabWindows/CVI.

To retrieve IPV4 information about your network adapters, you can use the GetAdaptersInfofunction. If you need IPV6 information, you will need to use GetAdaptersAddresses. I wrote a small example of GetAdaptersInfo and attached to it, you can see the result below:

Let me know if you have any questions-

NickB

National Instruments

How can I specify a default gateway for users of AnyConnect with a local pool of IP?

Hi all

This question relates to my ASA5510 8.0 software (4) running.

For many of my AnyConnect group strategies, I use a local pool of IP to assign addresses to remote clients. The pool is 10.1.50.1 - 10.1.50.250. The problem is that when clients connect, they get a default gateway 10.1.0.1 it would be OK in a properly configured network, but it's not really one of those.

I don't think there is any place where I can specify the default gateway value, is there? What is the right way to work around this problem?

Thanks in advance,

-Steve

Hello

Find out what...

Cisco AnyConnect VPN Client connection Ethernet card:

The connection-specific DNS suffix. : vcnynt.com

... Description: Miniport Adapter virtual cisco AnyConnect VPN for Windows

Physical address.... : 00-05-9A-3C-7A-00

DHCP active...: No.

... The IP address: 10.1.50.1

... Subnet mask: 255.255.0.0.< subnet="" mask="" is="">

... Default gateway. : 10.1.0.1.

10.1.50.1 is a part of 10.1.0.0 subnet. By design, to make the client VPN routing compatible with machines Vista. We had changed the functions of IPs for the DG on the client. It had been noticed that if you have the same DG ip address as the ip address of the virtual card it will not work. So what you see is good behavior.

In other words, Anyconnect will show the first ip address in the subnet as the DG which in your case is 10.1.0.1.

HTH...

Concerning

M

PS: To all users whenever you post your questions and the solution given to you, work, please make sure that note you. Helping other users with the same query to get their answers in less time rather post a new thread for the same thing and waiting for responses. This saves time for the author and the person who answers to him.

default gateway for vpngroup

Is it possible to configure a default gateway in the vpngroup?

When I set up the split tunnel for my vpngroup, they see the web but no local lan access. If I remove the split tunnel in the config, they see lan local but of course without web access access because everything is encrypted at this time.

I did a ipconfig/all in the two scenarios and found that in the split tunnel, there is no default gateway specified for the virtual card; without split tunnel, the default gateway in the virtual card is the ip address of the connected vpn client.

Usually, the pool of VPN and the internal network should be two different networks. The best way to do it is by using a class C network.

For example: 192.168.1.0 / 24 for network access

192.168.2.0 and 24 for the VPN Pool.

Note that the for the Pool of VPN subnet mask cannot be set and is chosen by the network class.

Add the default gateway for the VMKernel port group

Hello
I use this script to create a VMkernel port group, but the last part of the gateway address of updates to script for all groups of VMKernel ports. How can I change the script so it adds the passage for the 55-CHI-VMKernel port group only. Thank you.
$hostname6 = "host1".
$pg = New-VirtualPortGroup-55-CHI-VMKernel - VirtualSwitch "vSwitch1' name - VLanId 55
New-VMHostNetworkAdapter - VMHost $hostname6 - $pg PortGroup - VirtualSwitch "vSwitch1' - '10.33.1.77' IP - subnet"255.255.255.0"- ManagementTrafficEnabled $true mask
IP address of the gateway #Add
$netMgr = get-View (Get-VMHost $hostname6 |) Get - View).ConfigManager.NetworkSystem
$iproute = new-Object VMware.Vim.HostIpRouteConfig
$iproute.defaultGateway = "10.33.1.3".
$netMgr.UpdateIpRouteConfig ($iproute)

Have you tried it like that?
```
$hostname6 = 'host1' $pg = New-VirtualPortGroup -Name 55 - CHI-VMKernel -VirtualSwitch "vSwitch1" -VLanId 55
New-VMHostNetworkAdapter -VMHost $hostname6 -PortGroup $pg -VirtualSwitch "vSwitch1" -IP "10.33.1.77" -SubnetMask "255.255.255.0" -ManagementTrafficEnabled $true
#Add gateway IP address
$netMgr = Get-View (Get-VMHost $hostname6 | Get-View).ConfigManager.NetworkSystem $iproute = New-Object VMware.Vim.HostIpRouteConfig $iproute.defaultGateway = "10.33.1.3"$iproute.GatewayDevice = "vmk0"$netMgr.UpdateIpRouteConfig($iproute)
```

Welcome with the same IP address of a default gateway. How to prevent?

Hello

This week, I had a problem in the network. A host has been connected to the network with the same IP address of the gateway by default of this Vlan.

Is there a way to prevent it? I know with 802.11 x I know who done it, but it would avoid the problem to occur.

Is there anyway to force the hosts to use DHCP or something?

It will also prevent an unauthorized on an untrusted interface DHCP server. It provides (on an untrusted interface) only DHCP client messages such as DHCP queries (rejects messages from the DHCP server as DHCP responses) and allows only the source IP address packages he knows the addresses assigned by DHCP. Who is?

Darren

Can we have different default gateway for MGMT and vMotion?

Hello
We run vSphere 5.1 update 3 Enterprise Edition. VLAN is implemented in our site recently.
Network administrator assigns 3 VLAN to MGMT and vMotion VLAN10. It also gives me different for these 2 DG VLAN (there is another local network VIRTUAL for VM).
When I set up the IP address of vMotion, can I change to a different DG of the vSwitch MGMT?
Thank you

vSphere 5.1, no, you can't.

vSphere 6, yes you can, here vmware now gave us separate stack TCP/IP for vMotion and contributes to the vCenter vMotion cross too.

A default gateway is not available internet question

My internet is disconnected frequently at irregular intervals. However, when I solve the problem, he always gets fixed.

Here's my ipconfig/all

Microsoft Windows [Version 6.1.7601]

Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\tom>ipconfig/all

Windows IP configuration

Name of the host...: tom - PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.

Ethernet connection to the Local network card:

The connection-specific DNS suffix. :
Description...: Realtek RTL8168D / 8111D Family PCI - E Gigab
It Ethernet NIC (NDIS 6.20)
Physical address.... : 20-CF-30-F4-E0-E6
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::5968:10d6:cca7:44ec % 10 (Preferred)
IPv4 address: 192.168.0.3 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Sunday, August 10, 2014 17:47:37
End of the lease...: Sunday, August 10, 2014 18:49:53
... Default gateway. : 192.168.0.1.
DHCP server...: 255.255.255.255
DHCPv6 IOOKING...: 237031216
DHCPv6 DUID customer...: 00-01-00-01-1B-65-10-30-20-CF-30-F4-E0-E6

DNS servers...: 61.9.133.193
61.9.134.49
NetBIOS over TCP/IP...: enabled

Any help is very appreciated.

Hello Victor,.

Thanks for posting your query in Microsoft Community.

I would be grateful if you could provide us with the following information so that we can help you further:
1. What troubleshooting steps all use to solve the problem? Do you use network troubleshooting?
2. Do you have any other computer connected to the same network? If Yes, are you able to access the Internet on the other computer?
This problem may occur because of problems with the router or the obsolete network drivers. I would suggest trying the following methods and check if they help:

Method 1: Test method 1 incase you haven't tried other wise network troubleshooting, go to the method 2

Access the link below and follow the steps.

http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

Method 2: If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

To manually assign the IP address and default gateway, follow these steps:

a. in the system, right click on network icon tray. Choose the open network and sharing.

b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.

Example: Old Ip address is 192.168.0.1

Replace the IP 192.168.0.50

d. let the subnet mask and default gateway are the same.

Subnet mask = 255.255.255.0

Gateway by default, would usually 192.168.0.1 or 192.168.1.1

e. click apply then click Ok and restart the computer and check if it helps to solve the problem.

Method 3: You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

Method 4: Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.

Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

Note: When you use system restore to restore the computer to a previous state, programs
and updates that you have installed are removed.

Follow the steps below to uninstall and reinstall the network card.

a. click on start

b. in the type of search box of start of "devmgmt.msc" and press enter

(c) in Device Manager, expand network adapters

d. right-click on the network adapter and uninstall.

e. restart the computer, and then reinstall the network card.

When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

Hope the suggestions above helps. Please post back the results.

Default gateway will not save

Hello

My riding school just bought a printer LaserJet 500 color M551. I set up the IP port on our print server and manually entered the IP of the printer settings. This includes the IP address, subnet mask and default gateway. However, the default gateway changes itself to the same thing as what I entered IP address as soon as I leave the JetDirect menu on the printer.

After that, I tried to change through the web browser interface. So I changed to get a DHCP IP address and browsed to the printer and changed from the manaul IP browser. After I clicked on save, I could navigate is more to the printer based on the IP address I have affected it. I went into the menu of the printer to the printer itself and found that the default gateway changes itself again to the IP I assigned to the printer.

For this reason, the printer is essentially useless, because anyone on the network can be printed on it. Has anyone about this before? Is it an easy setting I'm missing? I am a network administrator and have implemented dozens of printers before and have never encountered this before. Any input would be appreciated.

Just an update for anyone who looks at this: when I print configuration, under the IPv4 settings page, it shows an error message indicating the INVALID GATEWAY ADDRESS. Lower than that, it shows the IP address of the default gateway that I have tried to enter. It shows then below the IP address of the printer, the subnet mask and the default gateway (it changed to be the same as the IP address). Here is the subnet and the gateway that I use:

255.255.0.0

10.1.1.1

After seeing this message, I tried to change the subnet mask of 255.0.0.0, and I received is no longer the error message. However, because I changed the subnet mask, it is not on the same network that the rest of our network, is still essentially useless. But when I change the settings of DHCP TCP/IP instead of manual, it pulls the subnet mask and the gateway that I entered in the first place (when I get the message to the INVALID GATEWAY ADDRESS).

I called HP support and they had me erase the disc and reload the firmware, and when she came back to the top the same problems happened. Its almost as if the printer (or the JetDirect card) is too smart for his own good and does not allow a combination of gateway and the subnet mask that is not a normal combination. Any ideas out there?

7048 config as default gateway. Next internet and Juniper at the break.

Hi, we have a stack of 2 x 7048 s who are (is?) configured as a default gateway for a number of VLAN from some Dell blade chassis. I won't go into too much detail because it's more of a conceptual thing I need to know

8 x VLANS, which are all x.x.x.254 255.255.255.0. Large. All the internal stuff works a treat.

Now, I would like to take 48 port and plug a juniper firewall and have all the internal stuff in access internet. safely.

I can put in place the Juniper and access the internet separately and everything works fine also. How can I join the two together? How to configure port 48 to be the gateway to the internet for all the VLANS?

of the outside external internet connection has (internally) is 192.168.1.254. He my Juniper with 192.168.1.92 APS (UnTrust pronounced by the external router DHCP). IP of confidence of Juniper is negotiable, but currently I put like 192.168.2.1 (static) and he would have the port defined as 192.168.2.254

Therefore, the conceptual bit to get all VLAN.254 see port 48 as the output to the internet, so I'm lokoing. Then, I need to set up DNS etc. internally and on the Gin that is the next challenge.

Thanks in advance

The command to enter a lane that will direct traffic to the firewall is.

console (config) #IP 0.0.0.0 route 0.0.0.0 192.168.2.1

The IP address 192.168.2.254 should be for VLAN 10 on the 7048. And then no other VLAN must be in the 192.168.2.x broadcast domain.

Console (config) #interface vlan 10

Console (config - vlan) #ip address 192.168.2.254 255.255.255.0

Then, to relay DHCP packets to the DHCP server, you would add the command ip assistance

Console (config) #ip helper-address 192.168.1.92 dhcp

Windows 7 default gateway is not available

I have excellent connections to MI-Fi wireless or your router (home or office) but no internet connection by using Windows 7 on netbook Dell. I tried to understand other assignments similar to my problem, but the answers are too technical. is there a solution for Dummies? my connections network does not show a connection to the Local network, if that helps. After you follow the instructions in troubleshooting, I get a message that says default gateway is unavailable.

Hello

1. Since when are you facing this problem?

2. is it works much earlier on this computer?

3. don't you make changes on your computer before this problem started?

4. you have from any other computer connected to the same network? If logged in, you are able to access the Internet on the other computer?

In the meantime, follow these steps and check.

Step 1:

First, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

Access the link below and follow the steps.

http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

Step 2:

If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

To manually assign the IP address and default gateway, follow these steps:

a. in the system, right click on network icon tray. Choose the open network and sharing.

b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.

Example: Old Ip address is 192.168.0.1

Replace the IP 192.168.0.50

d. let the subnet mask and default gateway are the same.

Subnet mask = 255.255.255.0

Gateway by default, would usually 192.168.0.1 or 192.168.1.1

e. click apply then click Ok and restart the computer and check if it helps to solve the problem.

Step 3:

You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

Step 4:

Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.

Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

Follow the steps below to uninstall and reinstall the network card.

a. click on start

b. in the type of search box of start of "devmgmt.msc" and press enter

(c) in Device Manager, expand network adapters

d. right-click on the network adapter and uninstall.

e. restart the computer, and then reinstall the network card.

When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

Aziz Nadeem - Microsoft Support

in wiraless I can access the internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

I can access wireless internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

Hello

1. you have from any other computer connected to the same network? If logged in, you are able to access the Internet on the other computer?

2 have you made any changes to the computer before the show?

3. What is the brand and model of the router?

In the meantime, follow these steps and check.

Method 1:

First, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

Access the link below and follow the steps.

http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

Method 2:

If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

To manually assign the IP address and default gateway, follow these steps:

a. in the system, right click on network icon tray. Choose the open network and sharing.

b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.

Example: Old IP address is 192.168.0.1

Replace the IP 192.168.0.50

d. let the subnet mask and default gateway are the same.

Subnet mask = 255.255.255.0

Gateway by default, would usually 192.168.0.1 or 192.168.1.1

e. click apply then click Ok and restart the computer and check if it helps to solve the problem.

Method 3:

You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

Method 4:

Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.

Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

Follow the steps below to uninstall and reinstall the network card.

a. click on start

b. the start search box, type "devmgmt.msc" and press on enter

(c) in Device Manager, expand network adapters

d. right-click on the network adapter and uninstall.

e. restart the computer, and then reinstall the network card.

When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

You can also consult the following link:

Windows wireless and wired network connection problems

http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

I hope this helps!

PowerConnect 6224 VLAN config / default gateway

Hello

I am new to configuring a VLAN and work with DELL going on so please forgive my ignorance.

I joined a small agency that currently has a flat structure networking including 1 6224 linked to two 5548 one is connected to three 3548 (access), and the other is connected to a server. The 6224 connects to a proxy (default gateway), and then on the Web. All devices are currently on a 192.168.78.0 24 network with ip default gateway 192.168.80.1

We want to segment the network using two VLAN initially. VLAN 1 user "80" and vlan 1 safety '70' and I want to clarify a few things before that I try:

1. can you stay the ip on the network switch for vlan user ex: 192.168.80.123 or should I create a vlan separate management?

2. I know in order for the inter - vlan, the ip of the gateway routing vlan must be on the 6224 and I then have to configure a default route to the proxy. The proxy must be on one VLAN separate or could I leave on VLAN 80 and change the ip address another que.1?

Thanks in advance.

I did it several times myself. You can do almost an infinite number of ways, but it will be better to stick to certain typical networking practices. Here is the version digest readers of what would be preferable to do so.

1 enable routing on the switch stack.

2. make a 80 VLAN for your network 24.80. Assign the IP 192.168.80.1 to this VLAN. In this way, customers will now be a ".". 1' default to the network gateway, they are on.

3 make an another VLAN 70 for your network 24.70. Assign the IP 192.168.70.1 to this VLAN. This will be the default gateway for the network. Repeat for however many VLANS / networks you want to.

4. create a separate VLAN for his own 'bubble' network between the switch and the upstream proxy server. (Lets call him a dummy VLAN 100 with an IP range x.x.100.x 29. It can be just a little/29 block or something or 24 if this is confusing. Configuring the ports a few ports 'access' for this VLAN for that no marked traffic pass over this network. Set x.x.100.1 to your Proxy Server and x.x.100.2 to your switch, then make sure you have directions on both sides about where traffic should go.

5. save your configuration so that you have to rebuild it after a reboot. :-)

It will be best to set your expecations about it. You want realistic during a weekend/maintenance window. ARP cache and other issues can make for some downtime. In addition, there are certainly other ways to do it, but that may be hurtful on the road when you need to increase or scale. Two years on the road someone wondered why a default gateway is on a few eccentric IP, or there are errors of routing intermentent, etc..

Powerconnect worldwide, just be clear what is the difference between a port of "access" to the port of 'general', and are a port 'trunk '. Conditions may be different from the Lim to make, and if one comes to tell the world of Cisco, this may be a little different.

Finally, don't forget to come up with a good procedure for this during your maintenance window. Come up with a good plan documented and so well thought out, when run you it, it will be nothing more than a task in office project.

Default gateway question

Our topology is quite simple. We have a set of 7048 switches connected to a Watchguard firewall. The switches have a couple VLAN routed together via the L3 switch stack. Currently, telephones and workstations all use their ip address vlan respective as default gateway (perfect) but the internal firewall (confidence) IP address is in the same subnet as the vlan primary and this ip address is the default gateway of switches (this cannot be good...).

I don't want my firewall to do so I guess I need to create a 30 routing inter - vlan subnet as an uplink to the firewall. Everyone did this with a similar L3 switch and a firewall Watchguard XTM?

I'm not familiar with one of these devices. It seems that you can't even create a routed on the L3 switch interface...

You have the right idea, create a common VIRTUAL local network between the stack and the firewall that is on a different subnet than the rest of the traffic.

On 7048 stack, you create a VLAN for this connection. Name it and IP address assignment.

Console (config) # vlan database

VLAN console(config-VLAN) # 2

output console(config-VLAN) #.

Console (config) # interface vlan 2

Console # name FirewallConnection

Console (config - vlan) #ip address 10.10.10.1 255.255.255.252

Then the port that connects to the firewall should be included in the access mode for the VLAN.

Console (config) # interface ethernet 1/g1

Console # switchport mode access

Console # switchport access vlan 2

Then the same thing on the firewall. Creat VLAN, assign IP address, assign to connecting port.

Keep us updated

Thank you

Always addressed E1500 DHCP default gateway for hotspot :(

Similar Questions

Maybe you are looking for