Always on very noisy fan, have you checked the manual provided

Similar Questions

• Brand newThinkPad x 1 Carbon20BS very noisy fan

  My new ThinkPad has a very noisy fan. This fan is noisy even with the only window open. Have I not a dud? Anyway to fix this easily?

  Thank you.

  Discouraged, I am hopeful for a solution.

  Good day and welcome to the community.

  As you say this is brand new, I would recommend that you contact the Service (info below) to discuss and get their advice.

  Kind regards.

• very noisy fan

  very noisy fan does not stop

  Reset the SMC.

  Barry

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I h

  I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I have an intel i3 proccessor, windows 7, internet Explorer.

  All processors Intel i3 having at least 2 hearts, your specifications far exceed the requirements; See http://ark.intel.com/products/family/75025#@All

  I have some computers with much slower processors, and Flash Player 14 works perfectly well on them also.

• I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  ShapiroPE wrote:

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  No I don't have this problem.

  If you do not know your iTunes backup encryption, then you won't be able to use it.

• Blue Screen Error: In reference to driver Canon A410 Power? have you tried the recommended solutions and still not solved?

  Blue Screen Error: In reference to Canon A410 power? have you tried the recommended solutions, a still unresolved?

  Hello Ms. LeggsAngelhearts,

  Download and install the latest Vista compatible drivers for your camera from the link below:

  PowerShot A410 - drivers

  See also: update drivers: recommended links

  Pick up the pieces after a computer crash

• Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Try to use the converter to push a VMX and VMDK existing in the environment file. Have you tried the Converter 4.3 and 5.0, continues to crash or delay. A 5.1 with ESXI 5.1 vCenter server hosts going conversion.

  Take a look at this article. You can try Converter standalone 5.0.1 or 5.1 beta.

  http://KB.VMware.com/kb/2033315

• Tecra S2 very noisy fan

  I just got my (used to have a S1) S2, but the fan is very noisy. It is noisy it is even annoying me during labor.

  I updated the driver in power saving mode and the power to register the software. But een noise remains.

  The fan also seems to operate continuously at full speed. Especially when loading the batteries upwards again.

  In battery mode
  In battery mode the fan starts, goes to high speed, stops for a short period, starts, going at high speed, stops for a shotr then that implemented site, etc etc this cycle is repeated over and over again. Very annoying.

  Why as with the S1 series where the fan seems to work constantly but that at low speed if you do not hear it.

  Mode full power
  The fan only is in battery mode back regularly at top and goes down to reduce speed also with regular periods. Why not let the fan turns at average speed?
  And as written above when the battery GET fans continue to run at high speed noisy!

  Is there an update of the material of possibel with a fan with less noise? Maybe by any other type of fan.

  I think to go back to my S1 and sell this S2 as it is very boring school work.

  Hello

  As much as I know on some units the fan running normal.
  It is normal that the fan make such a noise.
  I know that it is possible to run 3rd party tools to let the fan run all the time in slow speed.
  I think that you can find in the net.
  In addition, you can try to do the BIOS update if one available on download from Toshiba site.
  You can find them all on

  http://www.toshiba-tro.de/subpage/BIOS.html

  By the way the only way to change some settings of the cooling fan you can find in power management.

  Good luck

  Good bye

• Satellite L555 - 10 M: blue screens in Windows, the system very hot, very noisy fan

  Hello

  Since yesterday my laptop shows a few Windows blue screens with the following values:
  (no value or empty)
  PAGE_FAULT_IN_NONPAGED_AREA
  PFN_LIST_CORRUPT.

  Some auto repairs were performed by start-Help/Systemstartreparation.

  After restarting the system in securitymodus and anti-virus disabled
  the following checks were made:

  (a) chkdsk c:
  The file system have been checked and no problem not found.

  (b) sfc/scannow
  Windows-Resourceprotection found no integrity issues.

  The system works only in time and
  After a few minutes, the laptop will be very hot and the fan works very hard
  the judgment of the work system,
  the mouse stop working,
  There is no activity on the disk system c
  the system shows reactions
  Finally appears with PFN_LIST_CORRUPT blue screen.

  Could you please help?
  Thank you.

  What did you do with your machine? do you have additional software installed or upgraded something?

• Very noisy fan on the back...

  Most recently, it happened. I backed up my computer in my apartment at College. I recently installed a GeForce4 TI 4200 to replace my GeForce2 MX (I don't know if this is related to the problem, it is more likely is not, but it seemed to have started at around the same time). In any case, when I turn on the computer, it starts normally and goes to windows XP. 30 seconds after the start of XP, the fan at the back of the Tower (in the middle of the back, not the top one) starts making this loud snap. It seems to make stronger and stronger every day, or it's maybe just me. After a few minutes, the noise starts to decline slowly until the fan was again quiet. Usually, I stick a thin and in object to see if it still turns, and it is =)

  Why is this happening?

  That looks like a dying fan.  Especially since the noisest on start up. As soon as you can change

• Portege R830-very loud fan that runs until the machine hangs.

  My 3 month old R830 fan runs often and hard... and on a daily basis will remain running loudly until finally the machine hangs. .. What is very, very frustrating.

  Someone told me he had something to with the security of fingerprint software... go figure!... but anyway I'm eager to find someone who has a solution.

  As it is I think the machine is way over rated, because it is only an improvement of the SSD on the orginal R600, which, when it came out was the best in its class. A portable "high-end" disappointing from my point of view... and the so-called 'new' Z series looks a lot like the R600 with a SAME size SSD... so as it seems that I am stuck with this one, I'll try to find a fix for a very annoying problem.

  Post edited by: Brucead

  Hi mate

  Please check the settings in the Windows 7 power management!
  There you can optimize the CPU and cooling performance module this should help reduce heat dissipation and fan speed
  .
  In addition I recommend upgrading the Toshiba Fingerprint Software immediately to the version V1.0.2.32 or higher. In addition, turn off the power save option of fingerprint device in Device Manager.
  Device Manager->-> authentic Tec Inc AES1610-> the power management of biometric devices

  Here, you will have to remove the mark next to the option called allow the computer to turn off this device to save power. Disable the power saving mode will reduce the life of the battery, so you can check whether or not it helps reduce noise.

• How I have Firefox check the certificates revoked/expired?

  The heartbeat vulnerability fix requires servers to update openssl, get a new certificate and revoke the old certificate. To make sure a spoofed site does not use the revoked certificate, I need Firefox to check for revoked certificates. How can I activate this certificate revoked archive on Firefox?

  Hello

  I hope that your question has been answered.

  If you have not already the case, please mark this thread as solved by the solution of marking. This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Have you installed the original OS and drivers toshiba

  YES.

  But it's the same problem. You stop please ask these stupid questions?

  Not all people here are stupid and don't know much but you seem to give the same responses to the constant problems and repeating the same. AS ALWAYS.

  HAVE YOU EVER GIVEN FOR SOLUTIONS TO THE MASS? NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO.

  WHY DOU SELL YOU COMPUTERS and let people stupid answers CUSTOMERS HELP FORUM?

  SUPPORT AT LOW COST.

  IS IT NOT?

  Hello Matrox

  What is your problem buddy?

  It's user forum and not an official Toshiba support where you can exchange your opinions and problems with Toshiba directly so either take participation in these discussions and be cool or visit Toshiba service in your country and tell them your opinion on the Toshiba support directly.

  As I see you have posted more than 50 comments here, so you know how this forum works.

  Be cool man. ;)