Am confused on how to select several files not in order

Similar Questions

• Select several files or photos.

  How can I select several files or photos without cmd - click on each of them? I can not drag and select use the trackpad, and this issue seems to be too basic to answer with a Google search. (Macbook, OSX integrated trackpad from Apple 10.10.3,.) Am I missing something?

  I am moving to Lightroom to Aperture, and I'm getting used to the different interface.

  Thanks for your suggestions,

  /s/ Rankin Johnson IV

  Hi Rankiniv

  If they are in a consecutive order, you can click on the first, then SHIFT + click on the last one you want to select.

  Kind regards

  Daniel (from Switzerland)

• How to share several files at the same time?

  iI am trying to share a number of edited files and sending one at a time takes too much time. How to share several files at the same time?

  Yes, you can select and send/share several files at once.

  Start https://cloud.acrobat.com/send. Click Select files to send and then follow the instructions in file selection. If you want to add more files, simply click on add files:

  

  You can include up to 50 files by "transaction".

• How to register several files/attatchments on UCM using RIDC?

  Hello

  I would like to know how can I check in several files on UCM using CRMI. I'm currently checking - in one document at the University Complutense of MADRID with some metadata bsuiness and a specified file, but the end user must be able to specify more than one file to download.

  We provide several files entry on the UI so that the user can choose, in addition to the main file, several files (for example, up to 3) that are not created in the form of documents on the University Complutense of MADRID, but rather as the other files for a given document attatched.

  Should I simply archive them like I do with the first file and then specify on the side of the WCC that others are "other files". Or there is one way to treat these files attatched or another for a given document?

  Thanks in advance.

  Kind regards

  Filipe Baptista

  Hi Filipe,

  Upon check-in, you cannot select multiple files that WCC because both would take 1 primary and 1 file replacement as entries per request. If you are looking to add multiple files for a content of Check - in component ZipRenditions can be used to add attachments "multiple" the archived file. But again, this would be a check-post operation. A code for this example would be like this:

  Consignment:

  DataBinder dataBinder = idcClient.createBinder ();

  dataBinder.putLocal ("IdcService", "CHECKIN_NEW");

  dataBinder.putLocal ("dDocAuthor", "weblogic");

  dataBinder.putLocal ("dDocTitle", "CRMI-AttachTest1");

  dataBinder.putLocal ("dDocType", "Document");

  dataBinder.putLocal ("xIdcProfile", "RIDCProfile");

  dataBinder.putLocal ("dSecurityGroup", "Public");

  dataBinder.addFile ("primaryFile" ", new File("/home/oracle/test/run.sh "));

  dataBinder.addFile ("alternateFile" ", new File("/home/oracle/test/run1.sh "));

  dataBinder.putLocal ("doFileCopy", "1");

  dataBinder.putLocal ("fParentGUID", "6CD583399ED00A8D86A689BBF0AF89C7"); If she wants to be archived in a framework folder.

  Then the answer to this would be a fact and dDocName you need to use and check if the status is started:

  dataBinder.putLocal ("IdcService", "DOC_INFO");

  dataBinder.putLocal ("dDocName", "");

  dataBinder.putLocal ("a", "");

  If the answer to dStatus RELEASED =, and then run the code example attachment of multiple file like this:

  dataBinder.putLocal ("IdcService", "EDIT_RENDITIONS");

  dataBinder.putLocal ("a", "");

  dataBinder.putLocal ("renditionKeys", "addRendition0");

  dataBinder.putLocal ("addRendition0.name", "FileAttach");

  dataBinder.putLocal ("addRendition0.action", "modify");

  dataBinder.putLocal ("addRendition0.file:path", "\ridc\test.txt");

  dataBinder.addFile ("addRendition0.file", new leader ("test.txt"));

  addRendition0 is the first attachment that can be added, like wise, you can use addRendition1, addRendition2, addRendition3 etc to add more number of attachments to the same content.

  Re: using ZipRenditionManagement

  So, it is not a case where the checkin request itself you can add attachments himself (this feature is available with WCC 12 c - archive of content items and attachments together)

  With the UCM 11 g, you will need to check the response for the checkin data and then add attachments (which at one point I think that you can select 6).

  I hope this helps.

  Thank you

  Srinath

• How to delete several files at the same time in Windows 7

  Original title: I'm operating a windows 7 and I am the only operator. I'm used to Vista. All I want to do is to highlight several files and delete them from Documents in the trash.

  I'm operaating Windows 7 and I was used too using Windows Vista but I do not have the Remove feature that I outsourced either by organizing right clickng on selected files/files. I also have Norton Antivirus installed.

  Hi Allan Cole.

  It seems that these downloaded emails would not have permission to delete.

  You suggest to download and save all emails in a specific folder, and then you can delete or read emails downloaded from this particular file.

• To select several files to load as attachments in emails

  Lost my operating system and have reloaded Windows 7. I have Office Professional. One of my email accounts, when I try to download attachments to e-mail, the FILE UPLOAD menu can't stand that select a single photo at a time. If I just open this folder, I can select several photos (CTL works and Select.) MOVE and select the works), but does not work when I am in the menu FILE UPLOAD. Can you help me?

  I assume with Office pro you are using outlook, create new msg, and then use the Add Attachment option, navigate to the location of the photo and select the files.

  Don't forget depending on your email provider, it may be a limitation of size for mail

• How to open several files in ACR without bridge

  Is there a way? but not a single file, several files at once.
  Is it possible to open LR as bridge? (Some may wonder why I want to open if I use LR because ACR is similar to LR)

  There is no provision to do so. You are right, however. You can select multiple images in Lightroom and apply the corrections here. But when images to Photoshop Lightroom, Camera Raw only serves to interpret the Lightroom adjustments. Camera Raw itself does not open. Of course, you can open as smart objects. But only allow you to take individual images in Camera Raw.

• to select several files in the dialog box open, but it is impossible, isn't it?

  Hi forum,

  File and folder objects have a openDlg() method. The first also has the multiSelect parameter, it is not.

  I wish I could have also for the folder so that I can ctrl/shift select several folders instead of picking up a folder and all its subfolders processing.

  Maybe I'm missing something obvious or there is a solution to such a dialogue box.

  Kind regards

  Kasyan

  As suggested, an approach as possible:

  Folder.prototype.selectMultipleDialog = function (prompt,multiselect){
    var w = new Window('dialog','MultipleSelectDialog'),
    st,
    ls,
    btnGp,
      koBtn,
      okBtn,
      folderFilter = function(f){
          return (f instanceof Folder)
      },
      u,
      folders = this.getFiles(folderFilter),
      getFolderNames = function(foldersObjectArray){
          var n = foldersObjectArray.length,
          namesArray = [];
          while ( n--){
              namesArray[n] = decodeURI(foldersObjectArray[n].name);
          }
          return namesArray;
      },
      folderListItems = getFolderNames(folders),
      n = 0;
  
      st = w.add('statictext',u,prompt);
      ls = w.add('listbox',undefined, folderListItems, {multiselect:multiselect} );
  
      btnGp = w.add('group');
  
      koBtn = btnGp.add('button',u,'Cancel');
      okBtn = btnGp.add('button',u,'Select');
  
      koBtn.onClick = function(){
    w.close(0);
    }
  
    okBtn.onClick = function(){
    w.close(1);
    }
  
      ls.onChange = function() {
          okBtn.enabled = ls.selection!==null;
      }
  
      w.preferredSize.width = 450;
      w.alignChildren = ["fill","top"];
      ls.preferredSize.height = 200;
      btnGp.alignChildren = ["right","top"];
  
    okBtn.enabled = false;
  
      if ( w.show()==1 ){
    if ( ls.selection instanceof Array ) {
    n = ls.selection.length;
              while ( n-- ) folders[ls.selection[n].index].execute();
    }
    else {
    folders[ls.selection.index].execute();
    }
    }
  }
  
  var fo = Folder.desktop;
  fo.selectMultipleDialog("test", true)
  

  HTH

  Loïc

  www.ozalto.com

• We select several files with the file manager

  Slate with Android 4.4 21

  Multiple files can be selected in file manager to have the same approach.

  My workaround for the problem of "not writing files on USB key" was to install dropbox on the slate.

  This allows me to select a file (usually screenshots for instuctions) and copy it to dropbox.  So I delete the files.

  I want to be able to do these operations on multiple files at a time instead of all the necessary selections to make them one by one.

  I discovered that if you do a long press on a single file to implement mode "tool", you can tap on other files to add or remove the selection.

  I try to keep this slate reasonably stock because we use it to support the development of software that is used on the units that are used in manufacturing.  More similar we can keep this for manufacturing units, the fewer problems we should see because of incompatible software.

• How batch edit several files to add images on each page

  Hello

  I have pdf files (about 1000) and all of them have several files. Is it possible using Acrobat DC (grammatically or using a function or tool) I can change everything in batch to have an image at the bottom of each page?

  The same image on each page in each file? If so, you can use the command Add watermark in an action brought in Acrobat Pro to achieve this.

• How to select several objects on the layers panel in Illustrator CC

  I have a work of guge and I need to select a small group (about 10-100) of objects from 4000 bunk and then group objects ' em/split-to-layers for ease of use (this is an infographic of the human body for medical institute)

  There IS NO way by selecting in the Web because they are overlapping and sometimes not visible at all.

  in CS5 there was a function to select several objects to the icon selection Alt + click - move on the right in the Layers panel.

  Now the mode duplication towers - on when I try to run it.

  Then.

  Ho I select several object without having to click through thousands of them? (I need to drag-select)

  IM totally frustrated.
  

  As long there is no deliberately locked object, you can do the following:

  Drag on the lock column in the layer panel

  Object > unlock all (there is a shortcut for this)

  -> unlocked objects are selected

• How to select several images of text block?

  Hello world

  I'm sure it must be something obvious, but I can't get out!

  I'm trying to select multiple blocks of text. I choose a text frame and then 'shift' to select a second frame and his works fine AS LONG AS the blocks of text are not threaded. When text frames are threaded I can't select more than one at a time?

  Any help would be appreciated! Thank you.  HJ

  You can select several images (threaded or pierced) as long as they are on the same page or spread. But ID won't let you select images that are on different pasta spread.

  Ken

• How to set a file not found page on my page?

  I want to define an HTML page replace the default 'file not found '?
  How can I?

  I think it's always accurate: http://smallbusiness.chron.com/change-error-handler-firefox-48250.h...

• How to prevent automatic unwanted copies when I select several files?

  When I select 8 or more files to move, delete, modify, etc. as a group, XP automatically copies.  I pointed out the copies to remove them and get copies of copies. For example, the files in my music, newspapers, etc.  Is this a malfunction, or y at - it a setting I can change to stop this?

  Del

  When I select 8 or more files to move, delete, modify, etc. as a group, XP automatically copies.  I pointed out the copies to remove them and get copies of copies. For example, the files in my music, newspapers, etc.  Is this a malfunction, or y at - it a setting I can change to stop this?

  Del

  =============================
  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to select RAW files that have no jpg versions?

  I'm experimenting Lightroom, because I want to know if he can help me to get the best pictures of my Panasonic DMC-TZ60.  I got fine jpg, but she has the ability to take RAW photos with or without jpg versions.  JPG images are heavily processed in camera, and I became dissatisfied.  I used Lightroom to the process of the last series of photos I've taken in RAW and have exported jpg versions that I can share with friends and using Flickr.

  Over the years, I've had several cameras that could shoot in RAW, but after using Photoshop Express and other programs, including the RAW converters included with cameras, I found their incredibly slow and heavy.  I was recommended to lightroom as it can copy adjustments between photos taken together, and he didn't kick out me of the processor section whenever I finished it a photo.

  I don't want to do is double previous conversions, I'm looking for a way to find one of my previous RAW files that do NOT have a version jpg (with the same file name).  I can find easily all my RAW files - it is simply a collection of smart.  Where I can get all my RW2 (Panasonic) or RAW CRW (Canon) files.  What I can't easily do, is see if they already have a jpg version.

  Can it be done?  If so, how would you please?  Is there advice that I should consider marking or marking or which gives color to a RAW file when you import I can delete once treated?

  I don't think there is a way to do it. But why are you keep JPEG images? I shoot raw only. The only time I need a JPEG file is if I want to share it on the Internet, by e-mail, or send to a laboratory to be printed. Other than that, the JPEG is not necessary. So I generate JPEG files for a specific purpose. When this effect was filled the JPEG images are deleted. They can quickly and easily be regenerated when needed.

  Of course, these images for which you have only the master files to JPEG, you want to certainly keep those. But, in my opinion, there is no need to have JPEG copies of each raw file. Suppose you decide to make additional adjustments to one of these raw files. He must then remember to generate a JPEG file and remember where you store them. I just think that you do more work and confusion for yourself. But then, that's just my opinion.