Am I able to configure a wireless iMac keyboard to emulate the way a Windows keyboard responds to a depression of the DELETE keys and BACKSPACE?

Similar Questions

• Unable to connect to the wireless network; Request to use the function keys and the keys on the keyboard

  * Original title: wireless connection problem

  I have an Inspiron computer (laptop).  I can't connect to my wireless Internet.  When troubleshooting it says use the buttons or the function keys on the front or side of the computer to turn on my wi - fi.  How to do that? How can I activate my wireless Internet connection?  Help, please!

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Recently, the delete key and rt click on remove does not remove a message. Must restart you Bird to be able to delete a message. With the help of v 24.5.0

  Using Thunderbird 24.5.0, W7, patches up-to-date

  The DELETE key or right-click delete suddenly does not remove a messsage.

  Restart Thunderbird and then they both work.

  What should I look for?

  File is not very large and simply restart brought the function.

  But, as a note aside, I don't have the problem in the last two days.

  Don't know what has changed. However.

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8

  I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8. I have a toshiba laptop, and there is no switch on the side of my computer what is expected? Help someone?

  Hello

  My older Toshiba has a power switch WiFi.

  My new Toshiba has a WiFi switch above the F keys, although I do not know which varies
  by model. So check with Toshiba support, their documentation online and drivers, and
  ask in their forums where there will be others with the same model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Huawei has installed a malware during the installation of the drivers for the wireless modem: tips to remove the registry keys?

  Huawei sd usb storage

  Applies to: Windows | Windows Vista | Hardware and drivers

  A month before, I let a co-worker install a modem Wireless USB as Huawei to use my laptop somewhere without wifi service.  Subsequently, I uninstalled the software drivers because I don't think I'll ever use this modem again.

  Now, I noticed that there are several registry keys for different devices of e/s as:
  Huawei_sd_storage_usb
  and
  Huawei_some other drive type

  None of these registry keys can be deleted, I get an error saying that "year error occurred during an attempt to delete the key.  Same thing if I try to write data in the registry key.  This behavior resembles a persistent virus and not a register legitimate supporting a legitimate PnP device.

  I then rebooted in safe MODE, thinking which should pick up anything the malware is hung.  No go, same thing, cannot remove the key and cannot modify the data in the key.

  None of the malware scanners were able to detect this, including:
  Paid last AVG
  Windows Defender
  Microsoft Security Essential
  Spybot S & D latest
  Malware Microsoft Fixit

  I don't trust Huawei, and what look like these keys are to monitor my laptops I/O activities through any player or the USB port.

  HP DV5t-1000 CTO
  Pentium dual core 2.54
  4 GB of DDR, Home Premium Vista 64

  I'm moving your question on the forum of Windows for material and the Drivers.These are the registry keys related to the legitimate drivers provided by the manufacturer of the device and are not related to malware.

  Note, however, that you have an overload of running security software and some should be deleted. If you use Microsoft Security Essentials, you must disable Windows Defender in Vista and AVG should be removed, preferably using the AVG removal tool. I have no idea what is the Microsoft Malware Fixit.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and may adversely affect the effectiveness of these two products to provide protection.

  -steve

• Dongle wireless Duo 13 - What is the security key?

  Hello

  VAIO Duo 13: When I plug the USB dongle and insert an ethernet cable, a new wireless access point is available. When I try to connect to it, Windows asks the security key. Anyone know what it is? (If I hold the button on the dongle, Windows tries to connect, but fails and then asks for security key.)

  It must be indicated on the dongle itself

• Wireless does not appear in the Fn + F5 and dial-up connections to

  Hello

  I just installed a hard drive on my T60 and restored of WinXP from recovery DVDs, everything seems to be working very well, I have Windows SP3 upgrade more all software patches and updates ThinkVantage software to the latest version using the update 3 System. Today, when I try to use the WLAN I found a problem, there is no way to add a WLAN profile in logins, I can choose Intel PRO/Wireless 3945ABG when you create the new profile in AC, but after I clicked on next, I couldn't find any SSID wireless even if there is an asset. The drop-down list of the #3 (wireless mode) is also empty, the security property button is also grayed, so I cann't go further.

  I thought maybe it's because the without thread is disabled somehow, so I used Fn + F5, to my surprise it is not wireless in there! It has only Bluetooth. I have 2 wireless network connection in the network connections on Windows, it is listed as not connected, the hardware Manager shows also the NETWORK card wireless without any problem, so I think that WIndows does not recognize the wireless NETWORK card, but for some reason any Thinkvantage refuses to recognise it, any ideas?

  Thank you

  Jim

  I solved my problem of uninstalling and reinstalling the driver WLAN and AC (perhaps others drivers related, can't remember). The uninstall/install sequence is important, I think that you must uninstall AC first and finally install it.

• Wireless iMac keyboard 'stick' after sleep

  Sometimes (mostly, but not always - prob 90% of the time) my wireless keyboard 'glue' after my iMac 27 "comes out of sleep mode.  At the login prompt, the entry buffer fills up with junk as if a ghost is to type, and the keyboard is completely insensitive (e.g. to remove). The only solution is to hold the power button on the keyboard until it stops and then put the new one.

  The keyboard is not sticking in the physical sense, because once he recovers after a power cycle, it is back to normal (a properly glued key would be obvious that it repeats)

  Battery levels are very good - this behavior occurs regardless of the battery status. I read other reports of people in need of re-pair the bluetooth connection.  He doesn't lose it is the pairing, but there is a problem with connectivity, or there is a bug?

  Anyone who has experienced this problem?

  Thank you

  Try to do a reset of the SCM and LANDAU. The SMC reset may have to be tried 2 or 3 times back to back. If you are not familiar with these resets, please read iMac SMC and reset the PRAM. If those who do not help, please post back and there is something else to do.

• Unable to connect wireless even though we have the right key wireless.

  Wireless

  We have an acer one happy and we can connect to the internet by cable, but although we have to correct wireless code, we can not connect to wireless. Our other laptop works fine with the same code. Please can you help me?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  3. what exactly happens when you try to connect wirelessly?

  Follow the suggestions and check if that helps.

  Method 1

  You can update the latest wireless adapters.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  You can follow the procedure under article

  Problems in Windows http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04 see also wireless and wired network connection: solve problems, find http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks wireless networks

• My delete key does not work on my keyboard wireless for my Mac

  I have an iMac OS X Yosemite, version 10.10 and recently the DELETE key on my Apple wireless keyboard just stopped working. In order for me to delete something, I must highlight what I want deleted and write something in its place. I'm not too familiar with the iMac whatsoever. I'm normally on my new iPad Air 2 or my iPhone, so I'm not really on my as I want, especially now that my keyboard is upward, that it becomes a chore. I don't know how to troubleshoot Mac. I have not yet set up when I got it so I do not know how to associate the keyboard with the Mac either, but step by step Instructions I can def. I have

  someone else has a similar problem with wireless keyboard there as well? Or did someone knows how to help me? I don't know what to do please help

  Thank you very much!

  Have you tried restarting the Mac to see if the problem persists?

  If so, then then you should check to see if the key works.  It could be a keyboard failure.  Follow the steps at the end of this article.

  Of course if you have an old keyboard usb located around you could plug it in and see if it works normally too.

  Please let us know the results.

• Cannot set up and install a wireless printer. HP Photosmart the 427 UDP Port

  I know this question has been posted several times, and before I go, I want to report that I was researching spending last week and try every possible solution I've read. So I hope that someone can offer some new or still has outstanding question.

  Equipment: HP laptop, Windows 7, HP Photosmart Plus B209 all-in-one, Netgear WNDR3700 (Dual Band), Norton 360 Antivirus/Firewall

  My laptop and printer are both about two years. I have the wireless printer set up in my previous home on a different network (more old netgear router). No issues what so ever.

  So I recently moved into a new home, bought a new router and set up a wireless network. Everything works fine without thread; two laptops, xbox, ps3, tv, cell phones, etc.). I finally had time to set up the printer. USB works fine. But it can not configure for wireless use. I get the infamous (together with HP printers) error message that my computer cannot communicate with the printer and I need to open port 427 UDP. Tried twice more, but no dice.

  Uninstalled all HP software and the printer driver and re-downloaded/installed the latest things from HP website. Tried to install the printer and Wireless Setup again, but still no dice. USB works fine.

  And there began my long trip. Here is the list of things that I did without success, and I'm sure I did right. Turn off my firewall (norton and windows). Opens UDP Port 427 (norton and windows). 427 on my router (port forwarding) open UDP port. Maunally added the printer through windows as a wireless device. Manually add a network printer.

  I still get the same error of UDP port 427. Please PLEASE help me. tI really want to fix this and refuse to believe that something as simple as it is not repairable. Printers are cheap and I don't mind buying a new one (not HP), but I have enough stubborn to give my with trivial issues such as this.

  Hello

  Thanks for the reply.

  I suggest you contact HP support for help.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope this information helps.

• 10 Windows installed on my iMac (end of 2015). When in windows, I am unable to use the mouse.

  iMac 27 i7 (end of 2015) 16 GB Ram 1 TB Fusion Drive El Capitan

  I installed 10 Windows via Bootcamp.

  The installation actually windows I had to use the 'Tab' key and 'Back' button all the time.

  When it was finally installed, I found that I was not connected to the internet (WiFi) and also do not have a mouse or cursor.

  I downloaded "software of Windows Support for a 32 Gb USB Bootcamp Assistant.

  Began my iMac in Windows and under the tab 'options' button USB the Bootcamp folder, then Setup.

  Then, I got a message box...

  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access this item.

  I'm not brilliant with this sort of thing and now I am puzzled

  Any help will be greatly appreciated

  You probably have to go into Control Panel and add the mouse as a Bluetooth mouse for the computer

• wireless network icon has disappeared from the State system and the notification bar

  wireless network icon disappeared from the tray system and notifications (that is to say, it is no longer a wireless icon by the clock where I can see networks, connect to the network, or see the strength of the network).  How to bring back icon?

  See the following article: http://support.microsoft.com/kb/945011.  It should help to solve your problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• is there a way to reset the WEP key of a Netgear router, which shows not compatible with my computer as a wireless router?

  Daughter's boyfriend installed Netgear router wireless, but everyone has forgotten the WEP password, and I had to reset it and now can not get the wireless to the top.  Is there a way to reset the security password, and it shows the router, but cause 'inconsistent', says there is no security password to connect to it.  HELP, please!

  Thank you

  Kelli

  Maybe some help here: reset and restore the NETGEAR device to factory default settings