AM300: Helps connect two computers

Similar Questions

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot connect two computers for games.

  I am trying to connect two computers for games (Age of Empires 3) purposes, but when is connected the two with a cable ethernet (using a filter at one end adapter) nothing happens, I can't see not his computer on my laptop and it can't see my computer on his. In the game, I see his match but he can't see mine, and when I try to connect to the sound he says impossible to reach. Tried to make it work for days now and I'm at the end of my rope PLEASE HELP!

  As a quick test to go Control Panel - firewall Windows and disabling the firewall to see if it works. If you have a 3rd party software AV Firewall control may be in this control panel software.

  As the two PC is connected back to back without access to a DHCP server, they should award an APIPA IP address that should work. To eliminate the problems addressing assign a static IP on both.

  Properties of the Control Panel - Network and sharing Center - change adapter settings - Rt click on Local Area connection-

  In TCP/IP V4 each assign a static IP 192.168.0.X where x is between 1 and 254 and the 2 PC's are different so for example10 and 20, 100 or 1. The value of 255.255.255.0 subnet mask, save the changes and test the connection.

  If disabling the firewall resolves you can add an exception to the firewall program to allow the age3.exe through the firewall. More information here, as you ar accommodation only play locally just look at the top.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• I would like to connect two computers at home via a Linksys network for sharing files only switch.

  Both computers have Windows 7 Ultimate 64 bit installed and both computers already have access to Internet wireless (router to our owner in the next section).  I want to be able to continue to use the wireless Internet, but want to share files directly between my two computers with the switch, if possible (assuming that it will be much faster for file transfers and sharing of multimedia files).  I am a total rookie at most of these when it comes to networking of instructions in English is appreciated.  Thank you.

  Hello

  Method 1:

  I suggest you to see link and check.

  Connect two computers using a crossover cable

  http://Windows.Microsoft.com/en-us/Windows7/connect-two-computers-using-a-crossover-cable

  Method 2:

  You can also check the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows7/what-you-need-to-set-up-a-home-network#section_2

  http://Windows.Microsoft.com/en-us/Windows7/choosing-a-network-location

  http://Windows.Microsoft.com/en-us/Windows7/keeping-computers-on-a-network-up-to-date

  Method 3:

  I suggest you to see link and check.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way#section_2

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• Connect two computers VIA ICS

  Well, I have two computers at the same time with the same version of Windows XP which is XP PRO SP2. I don't have not currently updated to SP3 for the simple fact that the two are about to switch to Windows 7.

  The reson I try to connect these two computer this way is because my laptop has received such a bad for some reason virus whenever I tried to put it on her she would never do past the start screen or when I typed in the password it says access denied. I used Spotmau to a second partition on the hard drive and installed windows xp pro. I can see all the original (Windows Vista) OS files and all the stuff that I had to get out of it, but there are a few things that I have to go through ect... ect... The virus has managed to eat the automatic recovery partition and my late of course never did no restore CD anyway, long story short, I'm trying to get the lap top online via ethernet to my office. What I have is a wireless linksys with 4-port ethernet router. My internet connection comes from my mobile phone via the usb port. So what im trying to do is it here...   ISP (via usb) > Desktop (via ethernet) > router (via ethernet) > Lap Top... Reason for this is that I can not find the wireless card drivers for XP given the computer came with Vista. Last night I put in place the network using the network set up, and it worked for a period of 45 minutes, until the power went and when it came back it wouldn't work. There is no problem with the router or other hardware wise. Ivetried turn off all firewalls ect... and still nothing on the top of the Tower, but the office still works.

  Well, you have a router, that should do it is quite easy. Follow the link below, its what I used to put in place and never had a problem. If for any reason, you have any questions there is a small troubleshooting guide. Also, a couple of think to try. 1. disable the DHCP on the router and setting the 2 PCs of static. 2. with the help of a cable crossed to connect the two computers.

  http://www.annoyances.org/exec/show/ics_xp MCP. MCDST. LVL 80

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• Cannot connect two computers with Blackberry Bold 9700

  Hi, I use Windows Vista Business on my laptop and desktop. Recently, I tried to connect via bluetooth, but computers don't have a pair with my Blackberry Bold 9700. I was able to locate computers on Blackberry but unable to enter the PIN on computers when you are prompted. I noticed that the two computers do not have loacte the Blackberry for matching.

  Hello

  You can check the configuration of Bluetooth with BlackBerry connectivity.

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB04132&sliceId=1&docTypeID=DT_SUPPORTISSUE_1_1&dialogID=778835513&StateID=0%200%20778821766

  Also check the computer settings to add a Bluetooth device.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect two computers windows 7 for the file and printer sharing

  Original title: trying to share files and printers on two computers and seem to have a firewall problem! Windows 7 is on both computers.

  I went through the setup procedures, I think, but still actually will not connect.

  Hello

  ·        How are you trying to share files and printer through the group home or workgroup?

  ·        What is put in place procedures have you tried?

  ·        How do you know that there is a problem with the firewall?

   

  Step 1:

  Temporarily, you can try disabling the firewall on the system and check. See the article mentioned below.

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I also suggest you to disable the security software and check if you are able to establish a connection between the two systems.

  Note: Activate the wall and fire safety software once the scans.

   

  Step 2:

  I suggest you follow the steps mentioned in the articles below.

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of two computers

  Question about the creative use of Cloud on two computers: can I use the Photoshop application while my colleague uses the first Pro app on another computer?

  License is for a single user on two different computers (but not at the same time).

  -Dave

• Envy: Box of computers in office - All - in - One TouchSmart HP ENVY & Touch I connect two computers smart touch

  I have an old pevilion touchsmart, can I hook the two together and work as two separate screens, and not mirror?

  Hello @OnTimeVA,

  I see what you're asking now. The answer is 'NO' as the all-in-one is a computer equipped with a fixed thus display the entries must go through the computer to get on the screen. I've heard some people are able to go through the HDMI-IN port on some all-in-one computers, but not all were successful.

  I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

• Can I connect two computers with media center

  I have two laptops running windows 7 and an xbox 360. I tried to connect the two to the 360 to watch the videos stored on the two but unfortunately I found, I can connect only one at a time, I'm now trying to see if I can connect the two laptops with media center and access to both of my xbox using the an already established connection. Can anyone help?

  one at a time and connect a second pc, you must remove the
  WMC Extender and remove the pc to the Xbox interface association.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Need to connect two computers via homegroup

  Original title: Homegrups

  At home, I had two homegrups I want to conect them together

  Hello George,.

  Thank you for keeping us posted.

  Certainly, I understand your concern and will try my best to help you.

  I suggest refer you to the article given below and check if that helps.

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win81tab1&V2H=win7tab1

  Windows 7 HomeGroup: frequently asked Questions

  https://TechNet.Microsoft.com/en-us/library/ee449408 (v = ws.10) .aspx

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.