Ammeter reports an incorrect value

Similar Questions

• COS() returning incorrect values

  Hi, anyone of you tried get values of cos() to native c++... ? It seems that sin values are correct, but the cos returns incorrect values. As for example, sin(pi/2) Returns infinity. No idea what could be wrong?

  @SuhairZain,

  #include 
  #include 
  int main(void)
  {
          float pi = 3.14159265f;
          printf("Result: %f\n", sin(pi/2));
  }
  

  Result: 1.000000

• Incorrect value for PERM in TUXCONFIG

  I get incorrect values of PERM in TUXCONFIG. I did not define PERM in my UBBCONFIG file so ideally, its value must be 0666 in the TUXCONFIG file. After tmloadcf running - there, I'm like value of PERM 0600. TUXCONFIG file generates also with 600 permissions. Is there something I miss or are there changes I need to make in UBBCNOFIG?

  I use 12.1 Tuxedo.

  Hello

  Sorry about that.  The default value has been changed some time back and apparently as part of the documentation was missing.  Normally the best place to see the default values in the description of the file UBBCONFIG.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Network status reports "an incorrect configuration detected.

  Network status reports "an incorrect configuration detected.

  Ensure that the physical switch and the ports used by Virtual SAN are active and enabled multicast. Enabling multicast can be made in one of the two tracks on your physical switches:

  • Disabling IGMP surveillance.
  • Configure IGMP snooping for selective traffic

  Also, validate the configuration of the virtual switch for correct uplink VLAN, NIC failover configuration of team strategy and the virtual SAN traffic service is enabled on the VMkernel interfaces.

  Virtual SAN requires a VMkernel network with active virtual SAN traffic interface. All members of the cluster need to communicate on the same network segment of L2 with multicast enabled, and all members of the cluster should be able to ping each other. Having failed to meet this requirement will prevent virtual SAN to be configured successfully, since it prevents the hosts communicate.

• PDEElementGetBBox returns an incorrect value

  Hello

  I have developed a plugin that remove the object such as text, image, and path with respect to the coordinates of user input. In some cases, the value obtained by PDEElementGetBBox return the false value.

  Code I used

  If (PDEObjectGetType ((PDEObject) pdeElement) == kPDEPath)

  {

  PDEElementGetBBox (pdeElement, & bbox);

  float PathTop = ASFixedToFloat (bbox.top);

  float PathBottom = ASFixedToFloat (bbox.bottom);

  float PathLeft = ASFixedToFloat (bbox.left);

  float PathRight = ASFixedToFloat (bbox.right);

  If (the Condition is true)

  {

  PDEContentRemoveElem (pdeContent, j);

  }

  }

  
  

  Bbox return an incorrect value

  
  

  Is all that I'm missing
  

  Hmm. It seems that the method returns the BBox of the shape of XObject. This is the bounding box used to design the form elements, not the bounding box when she turned on the page scaling and offset. The documentation says that the BBox is returned in the 'user space '. I wonder, if you need to use PDElementGetMatrix and apply it to the BBox returned in this case - maybe anyway and you had the chance before - have you tried PDEImages?

• You enter a value and tab out of af:inputListOfValues displays an incorrect value

  Hello. I have a problem with the autosubmit and tab off af:inputListOfValues in my code.

  Problem: When I type in a valid value and tab out of the field, it ignores the value, I entered and displays everything the first list in the result of the query instead regardless of the value that I typed.

  My code snippet. What it does is simply a search for employee LoV unattached to an attribute of the entity, and depending on selection, it displays the name of the employee within the page. (it also retrieves a table view what employee number came into office)

  < af:inputListOfValues id = "empNoId".

  popupTitle = "search and select: #{bindings." EmpNo.hints.label}.

  value = "#{bindings." EmpNo.inputValue}.

  label = "#{bindings." EmpNo.hints.label}.

  model = ' #{bindings. " EmpNo.listOfValuesModel}.

  required = "#{bindings." EmpNo.hints.mandatory}.

  columns = "#{bindings." EmpNo.hints.displayWidth}.

  shortDesc = "#{bindings." EmpNo.hints.tooltip}.

  Binding = "#{workLocationBean.txtEmpNo} '"

  partialTriggers = "id1".

  valueChangeListener = "{bean.onEmpNoChange}" "

  autoSubmit = "true" >

  < f: validator binding = "#{bindings." EmpNo.validator} "/ >"

  < / af:inputListOfValues >

  Other things to note:

  When I enter a valid employee number and click anywhere on the page (not TAB), it behaves properly.

  I tried to figure this out for days. Even my valueChangeListener Gets an incorrect value (when I do System.out) when I tab out, so I do not know where to catch them and replace it with the correct value.

  Thank you.

  This happens usually when the primary key is not defined in the view object used by LOV.

  Dario

• Incorrect value during validation?

  When I try to validate I always come with the following statement of the "incorrect value".  The first comment comes from the validator and the 2nd is the real html in my Spry Menu. I would like to know what part of the HTML is bad.  I tried to put a %20 between words and apparently is not the problem.  Thanks in advance.

  Sorry, you seem to have misread my post, which was based on your original image.

  The image has a type-o, which shows

  With a dashboard where would be an equal sign. If this part is correct in your actual code, which is not the problem.

  FWIW: I just have to dig a little deeper, and it seems that html5 doctypes consider spaces in filenames as an error. Apart from Firefox, I don't know of any browser that has serious problems with spaces in the paths of files, usually only they understand without problem. If you have not used specific tags in HTML5 in the rest of your site, you can change your doctype to html 4 to avoid validation issues on file name spaces.

• Problem CS5: merging HDR Pro &amp; EV incorrect values

  Hello

  I try to use the HDR Pro on Photoshop, but have not yet find a way around a problem I encounter.

  The game Gran Turismo 5 3 Playstaiton has a photo and you mode allows to edit the parameters of the camera in the game and then export your image. When you open the images with Photoshop, a message appears informing you Photoshop data file is maybe damaged. You can choose to ignore this and the image appears as usual.

  The real problem occurs when you take photos with different exposure settings and then try to use the option "Merge to HDR Pro. For some reason, the values embedded in the files are incorrect. I took three pictures, the picture of high level was-3,0 exposure value seen in HDR Pro, which is obviously false, and the normal and low level photos both had a value of 0.0. Of course these confused values cause the whole process of HDR to go bad horrible, as shown here:

  http://i53.Tinypic.com/euh7ra.jpg

  Photoshop support pages inform me for files with missing values EV, can I put them manually, however there is no option for files with incorrect values. Is it possible that I can change the settings manually? Either through Photoshop or editing files elsewhere?

  Thanks for any help.

  Yes, there are the editing/display EXIF utilties.

  You can hand or change the hexadecimal numbers in the file (if you know how).

• Start little problem-ORA-07446: sdnfy: incorrect value "for parameter

  what I am doing wrong?
  
  SQL > startup nomount pfile=/oracle/product/9.2.0.6/dbs/initncersp.ora;
  ORA-00444: background process 'PMON' failed during startup
  ORA-07446: sdnfy: incorrect value "for the parameter.
  
  -rw - r - r - 1 oracle dba 466 Jan 21 11:11 initncersp.ora
  Oracle: tulppwradb02:ncersp > pwd
  /Oracle/product/9.2.0.6/DBS
  
  *************
  Oracle: tulppwradb02:ncersp > vi initncersp.ora
  "initncersp.ora" 127 lines, 3788 characters
  ##############################################################################
  # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
  ##############################################################################
  
  ###########################################
  # Archive
  ###########################################
  Log_archive_dest = ' / archive_nmarket/ncersp.
  log_archive_format='arch.ncersp.%s_%t.log'
  log_archive_start = true
  
  ###########################################
  IO and cache memory #.
  ###########################################
  DB_BLOCK_SIZE = 8192
  db_cache_size = 25165824
  db_file_multiblock_read_count = 16
  DB_FILES = 400
  
  ###########################################
  # The library Cache and sliders
  ###########################################
  open_cursors = 500
  
  ###########################################
  # Identification of the database
  ###########################################
  db_domain =""
  db_name = ncersp
  # Global Naming - apply as a dblink has same name as the db, that it connects
  global_names = TRUE
  
  ###########################################
  # Diagnostic and statistical
  ###########################################
  background_dump_dest = / oracle/admin/ncersp/bdump
  core_dump_dest = / oracle/admin/ncersp/cdump
  user_dump_dest = / oracle/admin/ncersp/udump
  TIMED_STATISTICS = TRUE
  
  ###########################################
  # Configuration file
  ###########################################
  control_files = ("/ db01/oradata/ncersp/ncerspcontrol01.ctl","/db01/oradata/ncersp/ncerspcontrol02.ctl", "/ db01/oradata/ncer")
  SP/ncerspcontrol03. CTL")
  
  ###########################################
  # Identification of the instance
  ###########################################
  instance_name = ncersp
  
  ###########################################
  # Work queue
  ###########################################
  JOB_QUEUE_PROCESSES = 0 #zero for maintenance
  
  
  ###########################################
  # Optimizer
  ###########################################
  hash_join_enabled = TRUE
  #query_rewrite_enabled = TRUE
  #query_rewrite_integrity = "trusted."
  #star_transformation_enabled = FALSE
  
  ###########################################
  # Pools
  ###########################################
  JAVA_POOL_SIZE = 51200
  LARGE_POOL_SIZE = 8388608
  shared_pool_size = 55343360
  
  ###########################################
  # Process and Sessions
  ###########################################
  process = 100
  
  ###########################################
  Recovery and # redo Log
  ###########################################
  fast_start_mttr_target = 300
  
  ###########################################
  # Security and audit
  ###########################################
  Remote_login_passwordfile = 'EXCLUSIVE '.
  AUDIT_TRAIL = DB
  
  ###########################################
  # Sort, hash joins, index Bitmap
  ###########################################
  pga_aggregate_target = 25165824
  sort_area_size = 1024000
  
  #######################################################
  # Need Varification for under parameters of primary s/n
  #######################################################
  ###########################################
  # Various
  ###########################################
  aq_tm_processes = 1
  compatible = 9.2.0.0.0
  log_buffer = 32768
  log_checkpoint_interval = 10000
  log_checkpoints_to_alert = TRUE
  max_dump_file_size = '10240'
  OS_ROLES = FALSE
  remote_os_roles = FALSE
  os_authent_prefix = "
  
  ###########################################
  # System managed Undo and Rollback Segments
  ###########################################
  UNDO_MANAGEMENT = AUTO
  UNDO_RETENTION = 10800
  undo_tablespace = UNDOTBS1
  #utl_file_dir ='* '
  
  
  
  ###########################################
  # OLD SETTINGS DB
  ###########################################
  #db_block_buffers = 550
  #resource_limit = true
  #parallel_max_servers = 5 # SMALL
  #global_names = TRUE
  #job_queue_interval = 60

  There may be additional or better clues in file alert_SID.log

• I get an incorrect value for the MIN function?

  Hello
  
  I get an incorrect value when I run the query below. Here, I'm getting the minimum of the two values. I use the function table of pipeline. This split function the comma separates into single value string. Actuatlly of the sub query min value is 956.23. But he's back 1002.56 as min value. How is it possible?
  
  Other wise, is there another way to get the min of comma-separated string value?
  

  SELECT  MIN(COLUMN_VALUE)
  FROM    TABLE(get_string_comma('956.23,1002.56',','));

  Hello

  I understand your situation, try:

  SELECT  MIN(to_number(COLUMN_VALUE))
  FROM    TABLE(get_string_comma('956.23,1002.56',','));
  

  Kind regards

• Clock is wrong, each reset jumps to an incorrect value

  We are a charity running a hospital radio station. We have a couple of computers running Windows XP Pro SP3.

  For some reason, the time is wrong. This isn't a matter of simple time zone where it is exactly an hour off - read more.
  On a single machine, the time is out of 63 minutes, 29.4 seconds. Another is is only 10.3 seconds. But, we have "mission critical" application that requires time to be correct, such as the national news by satellite.
  Each computer is running as an administrator, we have no reason to restrict users. If we go to the date and time settings, and set the time manually, it shows in time for a split second, then returns to the previous setting. If we use Windows when the same thing happens, he maintains for a brief flash and then shows the incorrect time again.
  We tried to use Symmtime, an application that runs with happiness on the other PC that shows a digital clock and date, it updates via Internet and normally sets the clock to the right time - he does, for a second, then goes back again. Other computers on the same network, are not affected. Just those two. (Symmtime reports the value adjusted, which is where I took the exact amount of the error of)
  Time Windows is disabled, it is not that anything that is set to zero. I went through the local security settings - local policies/user rights assignment/change time system - which now includes "Everyone" - but still will not allow the time to be changed. We have changed zone up and down then back to GMT
  300022 KB suggested adding certain values, but is not clear - the values shown are spaces in names, only the registry keys. There is no information to tell if they are DWORD or anything, or what should be the value. After giving "everyone" access to change the time, I think that the article is redundant to our needs.
  Our technology tells me that the CMOS battery has been changed, what could have been a cause of time running slow but blocks do not access to change the time. Even with a dead battery, you can start a PC and set the date and time manually.
  The computers are connected to a working group, but not a domain, other computers in the same workgroup do not have the problem. DHCP is disabled, because we use the IP addresses defined on the network for purposes of port mapping.
  A separate computer in another place has been recently overhauled because of problems she was having with the mutilated software. He was stripped to a disk drive formatted hard and installed fresh Windows XP Pro SP3. This PC also has the same issue and the clock is 9.2 seconds out. Again, we cannot redefine the time, he changes a fair return on its own initiative. It is not on the network as it is in another office of 14 miles away.
  We tried stop W32Time process, even through a reset while he was arrested, but still can not change the time.
  We really do not know what may be the problem and how to fix it-any ideas?

  SOLVED

  This has driven us crazy for some time. Some of our PCs had the question, which excluded the many sources available such as a router or server time or something.
  We finally found that the problem is a piece of software called PC Auto Shutdown of http://www.drivermagician.com/autoshutdown/
  There is an option to check in here: ' prevent users change the time system.
  Unchecking the box unchecked the problem for us. Something so simple, and yet has eluded us for months! No one knew that the option was there.

• Create null values in the database for interactive report link column values

  Hello
  
  I'm pretty new to APEX and tries to create an interactive report with the form. This report examines essentially for more information for a particular employee. If the employee has any information in the table, the report presents information with a button change beside him. If there is no record in the table for this employee, a create button appears. Now when you click create, a new creation page. This page contains the employee number as a single display field with the value from the previous page. This value is displayed in the page, but it is not in the database. Create the page has view-only number and a couple of other columns. The other columns get inserted into the table with an empty number!
  
  Can someone please? Looks like the page keeps the value zero for the number of the employee who came during the search of the interactive report. Hope I made myself clear, being the newbie hope I haven't used any incorrect terminology.
  
  Thank you!
  Robet

  Without the DB column, apex will not determine which DB column the data in this field are mapped to (it would be quite impossible to guess the destination since the name of the element column).

  If you want to assign to the previous element of the page, use the default section

  return: P1_EMP_NUM

  By default the value Type: body of the PLSQL function

  and configure the attributes of source as I said before

• Interactive report - bad graphic value data axis

  Hello
  
  We have created an interactive report based on the demo_orders table.
  The interactive chart displays incorrect data on the y-axis (4,00000 instead of 4 000,00)!
  Values in the table are ok, even the value displayed when the user clicks about data specific is correct.
  
  Anyone had similar problems?
  
  Request Express 3.2.0.00.27
  AnyChart #5.1.3
  
  
  Thank you.
  
  Kind regards
  Kristjan

  Hi Kristjan,

  I am able to reproduce the issue you report, using a report interactive optional APEX 3.2.1 and 4.0, where the language of the application is a non-English. So for example, if my English is * 10 000,00 graphic label * and when I pass the main language of the Application in German, so the values displayed should be * 10,000.00 * however it is incorrectly appearing as * 10 000 *. When you run in some non-English languages, used NLS decimal separator is a comma ",", but it is not properly applied to interactive report table. The problem is that the decimal separator parameter in the XML table is not correctly be escaped and is ignored. I have connected the bug 10154666 to follow this issue and a fix for this will be available in our next release. Thanks for that bring to our attention. At the same time, while ensuring that the values in your chart are displayed accurately, it might be better to create a region of separate table on the page in question, rather than using interactive report table.

  Kind regards
  Hilary

• TestStand report indicates a value of passage as a failure

  I came across a possible bug I want to put some feed on.  Attached is a sequence and VI that when run in test USE of all other iterations for the step values (i.e. next USE) the result will be maintained from the last USE and it will appear in the report. The ITI is a version of stripped-down-to-nothing of the test sequence acutal on soil with tricks to simulate error.

  Step has the mistake of ignoring and this situation occurs when an error occurs, but I do not expect the previous test result value is displayed.  Run the sequence and see what I mean.  It generated a report that puts my workshop on the issue of the stability of the TS.

  PS. LV 8.5 TS 4.0

  

  Paul-

  The reason are getting failed with a measure of the last good USE is due to many issues of compounding. The sequence is the default setting "Optimize not reentrant calls to this sequence", which essentially tells TestStand to cache a copy of the duration of the procedure described in this sequence to improve performance for each subsequent call to the sequence. So the value of Step.Result.Numeric will not only be maintained whenever you call the step proceeding of the sequence, but now also sequential calls. Then, note that the report shows that you had 10 iterations executed with 0 past and 0 failed. This means that you got errors on all iterations. Now, a step loop reuses the result of step that it executes each loop and the final result of synthesis is a snapshot of the latest iteration. Since you are ignorant mistakes, the numerical value of the result of step never gets updated, so the result of the final summary step is the same as the last object to be measured. The loop code then sets the State of the loop to fail because no iteration didn't.

  Look at the report attached to illustrate the behavior. The report shows you the results of each iteration, as well as the summary of parent result.

  Ignore the errors in general is a bad idea, but assuming you want to continue to ignore the errors, do one of the following in the order or ease and better behaviors:

  (1) add a preexpression to assign a default value, such as zero or NAN Step.Result.Numeric
  (2) uncheck the setting "optimize not reentrant call to this sequence", so that the default value of zero will be used for Step.Result.Numeric
  (3) add another step after that you use to see if at least one iteration success or failure.

• Error reports and incorrect Windows Experience Index ceased to host Windows Vista process"

  Title: generic original monitor pnp Oñati mobility radeon HD4330

  I have inspiron1545 from dell with windows vista32 with pnp monitor generic Oñati mobility radeon HD4330 more give me stopped process to hot error also do driver update.

  and give low score4.2 instead of 4.8.

  I need help

  Hi asdramadan,

  (1) what is you receive the exact error message?

  (2) when exactly you get this error message?

  (3) how long have you been faced with this problem?

  Method 1: Download and install the update that is available in the link below that addresses this question

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  Method 2: You can follow the steps described in the article below, which deals with a similar question

  Reports of "Windows experience index" of Windows Vista a graphic incorrect index score on processors Intel Menlow

  http://support.Microsoft.com/kb/961777