Amtrak Train map tracking: not allowed to use Google Maps Client ID
Amtrak introduced a card to follow up on their Web site at http://www.amtrak.com/train-routes.
This feature to function correctly on Internet Explorer 10 and even own Google browser Chrome. The only browser in which it fails is Firefox. I upgraded FF23 FF24 without change. I tried a restart of the FF24 in Mode safe... no change. I disabled and enabled Java, Flash, Silverlight without change.
Firefox 24.0 on Windows 7 64 bit.
Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:
Safari cannot open the page.
The error was: "not allowed to use the restricted network port.
On iOS 9.3 using Safari 9, the same URL opens fine without this error.
Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.
I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.
It seems I was looking at the wrong source code.
I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.
It seems port got 4190 recently added to the list of blockedPortList
2306 2049, / / NFS 220V 3659, / / apple-sasl / PasswordServer [addition of Apple] 2308 4045, / / lockd 2309 4190, / / ManageSieve [Apple adding] 2310 6000, / / X 11 2311 6665, / / alternate IRC [addition of Apple] 2312 6666, / / alternate IRC [addition of Apple] 2313 6667, / / standard IRC [addition of Apple] 2314 6668, / / alternate IRC [addition of Apple] 2315 6669, / / alternate IRC [addition of Apple] 2316 invalidPortNumber, / / used to block all the invalid port numbers 2317 }; 2318 const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);
\\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
What I've tried so far on my pc (XP Pro):
1. click on start, run, type regedit, and then click OK.
2. Locate and double-click the following registry subkey:
3. on the right side, double-click restrictanonymous setting.
4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
5. close the registry editor.
6. restart the computer.
I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
File and printer sharing exception is enabled in firewall. Don't have a firewall part 3
The two guest account are capable of Simple file sharing in XP Pro box checked also checked.
Please visit the following link.
Original title: administrator Win7
I have win7 and IE11 running on a HP 8540p. I'm the only person authorized to use the laptop - I am the administrator.
I keep getting these messages that do not allow to use a file. What should I change to have privileges for all functions?
The second file is not cooperating and was not deleted.
"Not cooperating" can mean many different things. A real verbatim error message would be more useful. In the case of locked files, it is often possible to remove safe mode.
I hope you can help.
I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.
ERROR: An error has occurred (code 0 x 80310060):
Group Policy settings do not allow the use of a PIN code start. Please choose a
other BitLocker startup option.
I tried to change local policy settings...
- Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
- Open the key require additional start authentication
- Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN
.. .but always not the same error.
Help, please. He drives me crazy!
Thanks for choosing Microsoft Community to post your question!
According to your description, it seems that you have problems with activation PIN code on startup.
Refer to the suggestions from this link and check.
For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads
SOA Suite 18.104.22.168
WebLogic Server 10.3.4
I create a domain template using model of Fusion Middleware domain generator (< MIDDLEWARE_HOME > \wlserver_10.3\common\bin\config_builder.cmd) with release template.jar
Characteristics of the source domain:
-Domain OSB (Oracle Service Bus)
-a managed server
-mode of development
When I create a new field using template.jar, start admin server and try to access sbconsole, the lancers of error to follow:
< 7 July 2011 14:02:45 BRT > < error > < ALSB Console > < BEA-494002 > < internal error occurred in OSBConsole: the current role of the connection is not allowed to use the console action: ' / StatusMessages ' com.bea.alsb.console.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / StatusMessages.
Truncated. check the log file full stacktrace
It is an old bug. This bug would be fixed with ALSB 3.0 :)
Problem: Model ALSB 2.6 Builder does not include certain security files
Oracle Service Bus - Version: 2.6 and later versions [Release: Aqualogic Service Bus and later]
Information in this document applies to any platform.
When a model is built from an existing default values area, the JAR file is the following security files:
So if a new domain is created with the model, sbconsole throws an access control security errors.
A similar problem occurs when you are using WLST to clone an existing domain.
When you access the service bus console, he doesn't know that the 'weblogic' default user has administrator permissions.
You receive the following exception:
The current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
com.bea.wli.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
Security policy files that exist in the area were not being grouped in the domain model when you use Model Designer.
Therefore, the default server policy files were used which are not applicable for ALSB areas.
You can implement the following workaround solution:
with model generator:
Ensure that the authorized person of the domain policy files are grouped in the model. This will cause these files to be extracted in the areas newly created (using the template). All new domain ALSB will be ALSB security policy files.
UN - jar, the template.jar file.
Copy the two files .ldift of the domain that you used to create the template and paste them into the safety record of the contents of the jar file.
Re - jar file template.jar and create a domain using the template.
While cloning a copy existing domain missing files from the domain you created in the directory of your new domain security.
Middleware > SOA > Oracle Service Bus > Oracle Service Bus
I and Home XP computer which is in my network, I'm tryng to get access to my computer vista laptop but every time he gives me permission to access error. I was looking the properties of share on the computer vista, still the same problem. I'm the only one who uses computers and I have 2 different user names are admin for the respective machines... is their anyway to solve the problem of sharing or file permission? ... Thanks in advance
For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
In Win XP Pro with Off simple sharing, you can visually see the setting of authorization/security and configure them according to your preferences.
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Use the same configuration from CS5 with mercury CUDA works perfectly. After that the recent upgrade of the OS X 10.9 mercury CUDA is no longer available and the only lets me run with either OpenGL or software. IM using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the program GPUSniffer in the latest files from Premiere Pro 7.1.0. The LAST line made me hugoverolariviere because it first on the list of supported map in the file 'cuda_supported_cards.txt '. Someone else has seen this?
Provider: NVIDIA Corporation
Rendering engine: NVIDIA GeForce GTX 285 engine OpenGL
The OpenGL Version: 2.1 NVIDIA - 8.18.27 310.40.05f01
GLSL Version: 1.20
Monitor properties 0-
Dimensions: (0, 0, 1920, 1080)
Texture size max: 8192
Supports the power of two: 1
444 shaders: 1
422 shaders: 1
Shaders 420: 1
-Calculation GPU info-
Found 1 devices that support for GPU Computing.
Peripheral OpenCL - 0
Name: GeForce GTX 285
Provider: NVIDIA (Apple platform)
Total video memory: 1024 MB
* Is not enabled by default because it does not match the list named cards.
Since it worked before mavricks and does not work after... the mavericks that leaves a conclusion... mavericks
Go to http://forums.adobe.com/community/premiere , and the area just below to ask a Question, typeRegeditdans
You can now read all the previous discussions on this topic... do not forget to click on see more results at the bottom of the initial list, if the initial list does not answer your question
I am Windows so do not favorite the message, but at least a message thread has a possible solution for SOME problems of mavericks
I use a vista program and recently I have not been able to use my hyperlinks in Outlook Express. When I click on the link of the message says something like «action has been limited...» Contact your system administrator. I have no whizard in this area. Some might direct me in this case.Outlook Express was last used in XP. CrystalBall told you use Microsoft Outlook.You receive an error message when you click a hyperlink in Outlook
http://support.Microsoft.com/kb/310049Microsoft Office Outlook Forum
I have already posted a couple of different questionsin the hardware forum since I am in the market for a new laptop. My problem is now one of the installation and so I post here.
With respect to computers, I have now decided to wait the GS60 MSI (laptop) out, but since I do not know how much time I'll have to wait and I'm in serious need of a new computer, I went out and bought a used desktop computer that will do the trick in the meantime.
Then I set up my desktop, installed my CS6 production premium suite, used the creative cloud (free version included in the suite) to download a few projects of my laptop and then upload them to my new desktop computer. Everything was going, until I got a second draft in first pro when suddenly a window popped up saying something like "Lisa HP uses the same series/number keys, please reinstall the plugin and use a valid/uniqe keys series/number" and then a red cross appears everywhere in my images.
HP of Lisa is my old laptop by the way I use again, in part as a laptop school, but I also want to keep editing on it while I'm on the go. Even if it's a nightmare to do serious editing on it is perfectly fine for some easy Assembly, at the beginning.
I was under the impression that I am authorized to install my creative combination on multiple computers, am I bad? Once I get my new laptop (May 6-12 months) I probably won't have to use a desktop computer more, but in the meantime, I won't be able to work on my projects on my desktop and my laptop.
What I really need to uninstall the garment on my laptop to use it on my desktop? I thought that the cloud was all about sharing between computers and I was really looking forward to be able to use cs6 on my two computers.
I spent a lot of money on my costume and I never exspected to have this problem, of course, I would be able to edit on my laptop and desktop computer, right? Or am I really supposed to buy the costume a second time? This really isn't an option for me, especially since it will only be for a few months.
If someone could help clear this up for me that would be great. Thanks in advance
If this is not software Creative Cloud then an additional restriction, is that you can only use one of the facilities enabled at any time.
What is the likely cause of this message when you access the e-mail
and this message when using Safari
Now sort of third-party security. Your Mac is managed by someone else?
I just bought the annual plan of team composition. Downloaded creative cloud and downloaded a few programs. Every program I tried opening request to "license this software" or "start the trial." I searched the forums and didn't find a solid solution to this. I chatted with online support and they could not help me and directed me to here. I thought pay me a monthly fee to access programs, not trials. Am I wrong?
Can someone please help me get this resolved? I need to get the drawings in motion as soon as possible!
OK, I got it. I needed to send me an invitation for first place. After agreeing, I can now open the programs correctly. Now I can buy additional tickets for other members.
I am told that I need "to accept the end user license agreement." I assumed I did this stage already?
Refer to this:
Just restart coldfusion or reboot server application service that both will work to reset authorized intellectual property
Whenever I'm trying to search something on google it says that I am using a proxy server and ask me to change my settings... I did all the thing n did everything it says uncheck my proxy server settings, but then even if I can't google anything.
I can't find anything online!
Please someone help me with this!
As soon as possible...
I am able to use all sites except google, where the most important for me!
waiting for your answer!
do help me please.
Welcome to the Microsoft Community Forums.
I understand that you have problems with the error message from the proxy server, internet connection.
- You have similar issues while accessing the Web site in Internet Explorer?
- Are you using a proxy software during internet browsing?
Also check the problem in Internet Explorer, if you feel the same way. Check that the settings of the proxy in Internet Explorer as well. Follow the steps below to do the same thing:
- Open Internet Explorer.
- Click Tools and then click Internet Options.
Click the connections tab and then click on LAN settings.
Check if the use a proxy server for your LAN check box is checked or not. If it is checked it means that the proxy server is configured on the computer.
Please try to change the Proxy settings in Internet Explorer from the link below:
According to the guidelines of the screenshot above, the browser you use is that opera, if the problem is specific to the Opera browser, please follow the link below to send your request to the support of opera, because they have more expertise on this issue:
Support of the opera
Hope this information helps. Please do not hesitate to write us again with the required information and we will be happy to help you come.
Maybe you are looking for
My storage indicates that I have 39 GB of video files. However, I can't find them. I have eliminated all the video clips, etc (I think) emptied the trash, but I'm still playing the same amount of files used in movies. I never downloaded movies or
When my main mail server migrated to a new system, they used Microsoft Outlook to organize my email. I used it for almost 2 months and it's awful. I would like to restore my old Thunderbird program. It seems to be working: I get the number of message
Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you
Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? When the same text is seen in another browser, it is displayed correctly as "two." The same quest
I am installing a new piece of software on my Windows Vista machine and I can't make it work. He said: "the installer of Windows for the Service is not accessible. I tried every fix I can find and nothing helped. Where should I go form here? I ra
Sfcdetails.txt opens Notepad, but there's nothing in it. scannow translates: "Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in the journal CBS.log windir\Logs\CBS\CBS.log for example C:\Windo