Similar Questions

• Can I create two tasks of IA using the same unit of data acquisition?

  Hi all

  Sorry for the question of gumby, but I'm new to all this stuff DAQmx, and I'm trying to understand how it all works.

  I use a USB-6229 with LabVIEW 8.6.1.

  I would use 30 lines HAVE to monitor 30 voltage remote signals.

  I would use the other two lines of AI to perform input voltage independent tasks.

  I tried to create and start the two tasks, but I get an error message when I try to start the second task.  He tells me that the resource is not available.

  What is the cleaner way to configure things working for me?

  Thanks in advance.

  -FB

  Hi diarmaede,

  You can only create one task to HAVE on your card. Read all your DO this card in a loop. You can divide the result and send it to different loops to work on it.

  It will be useful.

  Mike

• How can I create a Zoom Zoom feature on a photo?

  I've created a demo to work in Flash Catalyst. I have photos of a model of a dress. I would like to create a zoom zoom feature so that the viewer can zoom in on the details of the dress. I present this to a customer and I need help.

  Hello

  Here are the steps to make a zoomable image. I recorded a video of this and published here for easy understanding - http://my.adobe.acrobat.com/p72354062/

  1 import an image

  2. create custom vertical scrollbar. You can also use the vertical scroll bar by default. (Optional)

  3 create a custom horizontal scrollbar. You can also use the horizontal scroll bar by default. (Optional)

  4. Select Image, Horizontal & Vertical set scroll bars and convert them to the "scroll pane" using visualization.

  5. Select the image and map "Scrolling content" using visualization.

  6 double-click on, go inside the scrolling content component and create a State doubles for Zoom.

  7. Add a transition (optional)

  8. Add a button inside the Panel scrolling zoom in or out of the image

  9. Add 2 interactions in the button, zoom goto in State and the other to go to zoom back State. You can add directly from these interactions of image rather than create the button too.

  10. run the application

  Concerning

  Srinivas Annam

• Can I create a task that includes the 2 c series modules?

  I am trying to create a single task that includes 2 modules of the series C OR - 9425, but when I wire the constant "Mod3/port0, Mod4/port0" physical channel in the DAQmx create Virtual Channel.vi I get error-200086 which indicates the syntax range physical channel in the input string is not valid because several devices have been included in the chain.  It is my understanding of LabView help this multidevice tasks are allowed.  Also according to article KB http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA devices multiple tasks are supported for devices of the series S, series C and DSA devices, and according to this article KB http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I formatted my constant of physical channel correctly.

  Please can someone explain why I get this error when all indications are that this should be a simple thing to do?

  My C Series modules are in slots 3 and 4 in a chassis cDAQ-9188, I'm currently under LabView 8.5.1, with Windows XP

  Thank you

  Eric

  Hi Eric,.

  I am afraid that you cannot configure the hardware timing with the module 9425 in CompactDAQ. The NI 9425 data sheet explains: «the NI 9425 is a static digital module, so you can use it to perform only call by the software or static operations when installed in a chassis NI CompactDAQ.»

  For I, AO and countertops, daisy chaining multiple calls to DAQmx create channel equivalent to specifying a list of physical channels, but it's different for DIO. Only one virtual channel DIO can contain several physical channels (lines). It would be quite reasonable to assume that by specifying a list of lines 'with a single channel for all lines"would cause DAQmx put all the lines in a single virtual channel, but see how it is implemented under DAQmx, is not possible when the lines are on multiple devices. Also, it would be reasonable to assume that if DAQmx could not put all the lines in a single virtual channel, it would create a virtual ring road, but that is not how it is implemented-, it returns the error you received.

  Instead, here are two approaches to all 64 lines in a single task. Either we have to work.

  Approach: create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0 / line0:31 and MyChan1 contains cDAQ1Mod4/port0 / line0:31. Digital 2D Bool NChan 1Samp read VI returns a 2 x 32 table of Boolean. To flatten it into an array of 64 elements D 1, you must use the table to reshape or some other method.

  

  The task of DAQmx > ownership of channels is here to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a loop for to show that you don't have to encode multiple calls to DAQmx Create Channel. The constant "a channel for all lines" is redundant because it is the default value.

  B approach: create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This example uses the constant 'a channel for each line', which is not the default. MyChan0 contains port0/cDAQ1Mod3/$line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc.. Digital 1 d 1Samp Bool NChan read VI returns an array of 64 D 1 of Boolean elements. If you have used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64 x 1 matrix, there are 64 virtual channels with 1 line of each.

  

  Brad

• My 2 minute video of camera kodak registration has an .mov extension there. Director of Windows doesn't recognize. Quik time player someone. How can I create a small movie of 2 minutes with video and still images

  How to create a movie with Windows movie maker, it doesn't recognize a small video with the extension. My camera kodak MOV.  Windows Media will play sound only.   Quik time player shows video & sound, but it seems to change you must buy software Quik Time.  Is there something that recognizes. MOV and is free?

  If you convert the .mov file to .wmv format
  You should be able to open it in Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Global commands can be created for executives rooted?

  I'm migrating a suite quite extensive documentation of a model FM to another. One of the changes is larger embedded images (95% are of the same size). Given that many graphics by document (100 +) is a rather monotonous task to resize all the images (and related photos). I can batch process all the graphics in Photoshop, but can't see a way around the duty manually resize each image anchored, after I imported the old content in the new template. Because each object has an "object type" which are associated to him, would it be possible to make a global change to the properties of a selected object type?

  Maybe it's just wishful thinking, but before I accept having to enter the same numbers in the properties of the once anchored frame buzzilion, I thought I'd throw this puzzle in the forumsphere.

  Several options include:

  1. Bruce foster of the plugin Impgraph: http://home.comcast.net/~bruce.foster/ImpGraph.htm

  2. a Framescript custom

  3. in the MIF of the FM file version, use a text editor to adjust the frames parameter.

  4. do nothing, i.e. to remove the current frame anchored a new import graphics in the same place, FM resizes automatically had to be bigger than the imported graph 1 pt (see also #1 - Impgraph).

• Recovery of a computer disks can be used for another move from XP to Vista?

  I bought an HP computer a few years back with windows vista home premium, when I started it told me to do a series of witch of recovery disks that I made. Also, I have a laptop that is running windows XP Professional and want to put windows vista Home premium on it. So, are these recovery disks that I made my copy of vista Home premium? If this is not the case, how can I get the copy I paid? and if they do I use to install my vista on my laptop? If I can, how?  Thank you

  Hello

  You cannot use the recovery discs HP computer did you to install vista on your laptop

  read this

  ·                        as your vista is preinstalled on the HP machine it is an oem license and cannot be transferred to another machine

  It is linked to the original machine on which it is installed

  If he had a license of vista of detail that isn't there could have been transferred to another machine

  but it can only be installed on a machine at any time

  the rule is: A windows license = a windows installation

  You can use your HP recovery discs that you made to reinstall vista on your original HP computer

  and that's all you can do with them

  Microsoft sells more vista

  they moved on windows 7

  You can find a copy of vista and license left to a computer repair shop

  also read below on windows 7 price

  http://www.microsoftstore.com/store/msstore/en_US/list/parentCategoryID.44066700/CategoryID.50726100

• Can't see the dimensions for drag - move to create dataforms: Oracle EPMA planning

  I m trying to create a "simple dataform" but cant seem to find the dimensions for drag - move so I can create it. I can see dimensions in the Pan "POV", but nothing in the pots line and column as you can see in the screenshot.

  

  I missed something?

  would appreciate any suggestions,

  I got it. We are supposed to drag and drop dimensions using the icon

• Can I create a digital line written task in another digital line written task (NOR-6723)?

  Hello! I need to build an application that follows these steps in the order shown:

  1. create a task that writes a numeric value ('1 ' or ' 0') on line1 digital to a NOR-6723;

  2. create a task that generates a clock on the same Board $line0 pulse. So, when the value of the line of $line0 has been set, a transition from '0' to '1', and then '1' back to '0' must be made on the $line0.

  So, I have the following pseudocode:

  1. create Task1

  2. create digital output channel ' Dev1/port0/line1.

  3. write bits of data ('0 ' or ' 1') on digital line1

  4. stop & erase Task1

  5. create Task2

  6. create the digital output channel ' Dev1/port0/$line0.

  7 write bit '0' on digital $line0 data

  8 write '1' on digital $line0 bit data

  9. write the data bit '0' on digital $line0

  10 stop & erase Task2

  After I stop & erase Task1 (step 4), the digital line1 remains in the State that gave step 3. But, once I created a digital channel for $line0 (step 6), line 1 is in the State of initialization (high State - because of the low pull-up), so when Task2 generates the clock on $line0 pulses, the data written bit on line1 is compromised (it will always be '1').

  My question: should I move 4 step after step 10? I mean stopping and disabling Task1 bring Task2 AFTER WHAT had been arrested and cleared?

  Is that what this ensures that value of Line1 remains unchanged until the end of the entire application (once Task2 completed)?

  Please help me!

  OK, don't know the exact calls in labwindows, is perhaps the easiest thing to create a taste of writing on the complete port.

  In this case you write every line for 8 lines of the digital port at the same time.

  Use is some form of a variable (U8) and associated function which can hide and update the bits in a number of U8

  I guess that there is a form any to make an OR operation bitwise or function AND to hide the bits of interest

  1 Create variable (U8) = b0000000

  2. create Task1

  3. create a digital output PORT ' Dev1/port0.

  Update 4 line 1 by 1 in the variable: 00000010 (this should be a routine you create - see crude example below)

  5. write variable to Dev1/port0

  Update 6 line 0 with 1 in variable: 00000011

  7 write variable to Dev1/port0

  Update 8 line 0 0 in variable: 00000010

  9 write variable Dev1/port0

  10 stop & erase Task1

  Function UpdateVariable (line; variable value)

  If line = 0 then

  If value = 0 then

  variable = variable AND b11111110

  on the other

  variable = variable OR b00000001

  otherwise if line = 1

  If value = 0 then

  variable = variable AND b11111101

  on the other

  variable = variable OR b00000010

  Hope that helps

  Katya

• I use Windows Live DVD Maker to create DVD movies to play on regular DVD players. But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  Projects of direct burning on Blu Ray?

  I use Windows Live DVD Maker to create DVD movies to play on regular DVD players.  But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  I think that you need a more powerful software. A Google search for:
  "Blu - Ray Authoring Software" could be a place to start.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• Can I create a new Type of task?

  I am trying to automate a workflow process that treats the esx host, and I want to create a new task I could repeatedly use scheduled tasks or vitoolkit, thus masking the users complexicity. Is this possible? I see what API a taskTypeID? can help me got a bit further. Thank you.

  CreateTask

  Creates a new task, specifying the object with which the task is associated with, the type of task and the task is cancelable.

  Required privileges

  Task.Create

  Since

  VI API 2.5

  Parameters

  Name	Type	Description
  _this	ManagedObjectReference\	A reference to the TaskManager\ used to call the method.
  obj	ManagedObjectReference\	ManagedObject that task will be associated
  taskTypeId	xsd: String	Registered extension creating task type task type identifier
  initiatedBy*.	xsd: String	The name of the user on whose behalf the Extension creates the task
  voidable	xsd: Boolean	True if the task should be cancelled, otherwise false

  There is no documented way or supported to extend vCenter or ESX - at least not not yet.

  To work around the problem, maybe you can consider alarms or maybe even planifiΘes? It can be called several times, and at least with alarms, you can target different objects.

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• How can I use my instore credit for a movie

  How can I use my instore credit for a movie

  Hello R Larson,

  I see that you are wanting to use a store credit for a movie. I'll be happy for you have said in the right direction. First of all, let's see if we can find out if the credit is a credit of iTunes gift card or a credit from the Apple Store. This article will help you determine what may be:

  What kind of card do I? -Apple Support

  If credit is iTunes, you can just check your balance using the instructions found in the section below and use to either rent or buy a movie to display:

  See your credit balance - Apple Support iTunes

  If the store is an Apple Store Gift card credit, you would not be able to use iTunes to watch a movie.

  I hope this helps. See you soon!

• I have problems of space on my iPhone 6. I have only 21 photos and 2 videos on my phone. However, I am on a discussion group on whatsapp. How can I create more space for my phone? I also have very few applications on my phone.

  I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?

  You cannot create more space for everything.  All you can do is remove apps, photos and especially videos to make room for other pictures and videos.

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.