An automatic download XP seems installs correctly but then guard reappear.
I use windows XP with automatic updates all and with all the major updates installed, but in the last ten days an update is automatically downloaded and when I stopped the computer he said that downloading was ready to be installed. He confirmed afterwards he did and turns off automatically.
However, the next day the icon was still there and I tried several times to install manually again. Whenever he went through the process, confirmed that it was installed properly and icon, then apparently disappeared. However, whenever I stop it goes through the same process without actually editing it. He always keeps doing exactly the same thing every time I try it manually too.
I don't know how to remove the download and try to re-do it. Any help would be appreciated! MIKE
Mike,
We need more detailed information as requested by PA Bear. However, you can review these items because they can help.
Troubleshooting Windows Update: offered on several occasions to update
Reset the Windows Update components
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
If I need to can replace it where I get an older version?
Thank youFirefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.
The latest support for your operating system version is 3.6.26 , you are fully updated.
For more information, see:
Firefox 3.6 system requirements
Firefox 10 system requirements
[For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
I tried to install gta iv and it installs correctly but it want allow me to play it gives an error code 10 ws and it don't work with my labtop.
Try the various corrections in the connection of Rockstar and you should be OK, run the game.
assuming that your graphics card is Nvidia 630 m or better.HP make several versions of dv6, and they use different graphics
Two examples are inferior to.
The AMD HD m 7690 XT graphics card is quite capable.Portable control review - HD 7690mXT
Not as powerful as the HD7690m XT (or HD7690m), but still able to run the game.
They do not have GTA4 in this review, but I guess that means, mixed with tweaks
settings for most low for the stable game..
-
I managed to install 5.7 LR on top of my existing installation of 5.6, but then, at startup, the application crashes with the following error message
Any ideas?
Cheers, Alex
Process: Adobe Photoshop Lightroom 5 [645]
Path: / Applications/Adobe Photoshop Lightroom 5.app/Contents/MacOS/Adobe Lightroom Photoshop 5
ID: com.adobe.Lightroom5
Version:?
Code type: X 86-64 (Native)
Parent process: launchd [155]
Responsible for: Adobe Photoshop Lightroom 5 [645]
User ID: 501
Date/time: 22:50:16.935 2014-11-19 + 0100
OS version: Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 800C35BF-38E6-B19C-E0D6-270BE38D4737
Crashed thread: 0
Exception type: EXC_BREAKPOINT (SIGTRAP)
Exception codes: 0 x 0000000000000002, 0 x 0000000000000000
Request for clarification:
dyld: launch, loading of the dependent libraries
Dyld error message:
Library not loaded: @executable_path /... / Frameworks/stand. Framework/versions/a/stand
Referenced from: / Applications/Adobe Photoshop Lightroom Photoshop Lightroom 5 5.app/Contents/MacOS/Adobe
Reason: image not found
Binary images:
0x7fff6bc0d000 - 0x7fff6bc40817 dyld (239.4) < 7AD43B9B-5CEA-3C7E-9836-A06909F9CA56 >/usr/lib/dyld
0x7fff8a83f000 - 0x7fff8ab3fff7 com.apple.Foundation /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation < 24349208-3603-3F5D-95CC-B379616FBEF8 > (6: 9 - 1056.16)
0x7fff8be28000 - 0x7fff8c99eff7 com.apple.AppKit /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit < 9DC13B27-841D-3839-93B2-3EDE66157BDE > (6, 9 - 1265.21)
Model: MacBookPro7, 1, MBP71.0039.B0B of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, MSC 1.62f7
Graphics card: NVIDIA GeForce 320 M, NVIDIA GeForce 320 M, PCI, 256 MB
Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 15 devices, 1 incoming serial ports
Network service: Airport, AirPort, en1
Serial ATA Device: ST2000LM003 HN-M201RAD, 2 TB
Serial ATA Device: HL-DT-ST DVD - RW GS23N
USB device: ISight built-in
USB device: Memory card reader internal
USB device: Hub BRCM2046
USB Device: USB Bluetooth host controller
USB Device: IR receiver
USB device: Apple keyboard / Trackpad
Crush Bus:
There is a problem with distinction uppercase / lowercase letters in the file to the library path. The partition of my drive has file names enabled, case-sensitive which is no doubt why it does not affect everyone.
dyld is trying to load "@executable_path /... / Frameworks/asneu.framework/versions/a/asneu'." The actual path on the disk is ' / Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/asneu.framework/Versions/A/asneu.
By renaming the 'Versions' directories 'versions' and 'A' and 'a', Lightroom was able to run. I did not test, so there could be other problems of case sensitivity.
-
Whenever I try to install KB2530548 it apears to install then subsequently it said my computer was not set up correctly, so it reverts to the previous settings. Did somebody solve this problem?
Hi paul jabru,.
Thanks for posting your question in the Microsoft answers Forum.
Install the update in a clean boot State, try. This will eliminate any software conflict if that is what causes the update fails. You can also run a full scan with your antivirus. If necessary, you can use the free sanc provided by Microsoft Security Essentials.
You can also check the integrity of your system files by running a scan SFC and the consistency of your hard drive by running chkdsk. For the chkdsk command, follow these steps:
- Restart your computer and immediately press the F8 key until you reach the Advanced Startup Menu of Options.
- In the menu, select Safe mode with command prompt.
- At the command prompt, type chkdsk/r (there is a space between the k and /)
Before finishing the chkdsk command, as a precautionary measure, make sure you have a recent backup important data.
-
I uninstalled and reinstalled as an administrator. using windows 7 ultimate 64.
After that it says successful installation, it cannot find any version of flash on the adobe support page!Ah, I think it's your problem. You have 64-bit Windows, but you run 32-bit Firefox. If you install the 64-bit plugin, it will work only in 64-bit Firefox, not 32-bit. Have you installed the 32-bit flash I linked above? x 64 Firefox isn't officially supported by Mozilla again (there's a party there, but it is still in development), we recommend that you continue to use 32 bit Firefox and plugins until it is officially released.
So, if you download the link I gave, as long as you have x 86 Firefox (not one every night, you don't), it should work. The all x 64 and x 86 can be confusing with the plugins.
-
Photoshop cc installs correctly, but will not update
OK downloaded the trial version of cc
I install it, I install photoshop and I install illustrator, everything is ok except repeat me photoshop update, but when I click update it tells me
Download error. Please click try again, or contact customer support (49)
I tried to uninstall, using the cleaner tool and reinstall but still the same problem
You need to 'dig deeper' specific programs
Cloud programs are version 7 internally... example... First Pro for Windows... the most recent shows is the version 7.2.2
-
Original title: KB 2393802 will not install and keeps back__
The windows above update keep coming back and will not be installed. If I check the update of victory it will tell me the update is available (no download, already installed on the machine), I so go ahead and install the update. About 2 or 3 minutes later the yellow flag appears indicating that KB2393802 is available. After the installation it tells me that it has been correctly installed. The event viewer also tells me it installed correctly. So far, in my history of editing, I have 32 incident KB2393802 cela being installed correctly.
Any suggestions please?
(the only thing I've done is to rename the Catroot2 folder and restart the system according to the instructions in MS for about 2 years for another machine)
Original title: KB 2393802 will not install and keeps back__
The windows above update keep coming back and will not be installed. If I check the update of victory it will tell me the update is available (no download, already installed on the machine), I so go ahead and install the update. About 2 or 3 minutes later the yellow flag appears indicating that KB2393802 is available.
Let me take you, you are under Windows XP SP3. If true, and only if it is true, the following might help you resolve the issue (which is common for all updates kernel on Windows XP computers):
KB2393802 (MS11-011) is an update of the kernel, and since these are released for Windows XP, MS is not those to install properly for years as soon as it is an OEM System (with OEM drivers) installed on which these kind of updates must be installed on.
To get these updates for Windows XP is installed correctly on these systems, you will need to download the update from download area:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=a511d33a-9ae0-46EE-A225-9d97390de7d1
* Save * the file in a folder and run the EXE file with the parameter "/ o" (like "/ overwriteOEM"-seehttp://support.microsoft.com/kb/262841/en-us for more details on that and other parameters) subsequently.Suppose you downloaded the English version of KB2393802 in a "Downloads" folder that is located on your C: drive. In this case, please restart Windows Mode safe mode (hit the [F8] key after the BIOS screen occurred while starting your machine). Then enter the following information * including * all blanks and the signs of the quote in "Run" in the start menu and press [Enter] or click OK, then:
'C:\Downloads\WindowsXP-KB2393802-x86-ENU.exe' / o
After restarting Windows, the update should not be reaffirmed by WU/AU once again - at least after you visited Windows Update via IE and looked for new updates once more.
-
I've subscribed and downloaded CC Photoshop and Lightroom
But my computer crashed and it has since been repaired - is no longer have Photoshop CC.
How do I re-download it under my current account?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
My system is a windows vista Home premium 32-bit.
Update KB936330 is a mircosoft service pack.How to solve the problems of Windows Vista service pack installation
http://support.Microsoft.com/kb/947366
How to uninstall Windows Vista SP1 as a troubleshooting step
http://support.Microsoft.com/kb/948537>
UTC/GMT is 19:49 Saturday, October 27, 2012
-
Open my Apps IPhone, but then 'close '.
When I opened a few apps, they seem to open, but then I am struck out immediately back to the home screen. The application, however, always seems to run in the background, but when I switch to the application, it stops again me and kicking back me to the home screen. Working on the iPhone 6 s with the latest iOS. It's happened more frequently.
Is this something with the memory?
Try closing all applications in the app selector, and then force restart the phone. No data will be affected.
Close all applications in this way. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there no acrobat pro CD is installed.
Hi Pavle,
The installer for Acrobat is different from the rest Cloud Creative applications that is why when you create a package by using Creative Cloud Packager, there are two folders created:-
(1) build-->> all upward for all Applications of Cloud Creative except Acrobat.
(2) exceptions-->> Contains for Acrobat and the Muse.
You will need to install Acrobat first through the Exceptions folder. Select the option to install as a trial or a subscription.
Then install the creative rest of Cloud applications through generation file, it will install the applications and your copy of Acrobat license also.
I hope this helps!
Thank you
Tanvi
-
Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...
When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.
-
Everyone,
I'm trying to configure the WIndows server. I am running the following: Windows Server 2012 R2 Foundation.
I did the following:
1. I crossed the Config Wizard on domain Active Services and installed it.
2 then I joined the field. When I reboot the server, I get the following error:
A. "your computer seems to be configured correctly, but the unit or".
"resources (DNS server) is not responding.
A1. When I put a static IP address on DNS, I can't go to the Internet. Even if
I can go to the tank and the PING of the IP address and everything is good.
A2. The I change the DNS to get the IP address automatically. Then I can get to
the fine of the internet, but I still get the same message about a problem with the
DNS server.
Can someone guide me please what the issue is here? Thanks in advance.
3. Furthermore, I can't see the new server name/information when I go into Windows Explorer
as part of the network.
A. I'll go in Windows Explorer and see the other machines when I look at the network level. Yet,.
for the that set up simply, I can't find it, please help.
Thanks in advance.
Jerry
Hi Jerry,
I would like you to post your question in the forums TechNet for assistance:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
I hope this helps.
-
recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well
Hi mikedav,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.
Method 1:
Follow the instructions in the link below which will help you solve the problem.
Tips for solving problems with Internet Explorer
http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx
Method 2:
Follow the instructions in the link below to optimize Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
Maybe you are looking for
-
Hi I can not update my app for my iPhone error 1009
-
How do you take into account a differential signal with daqmx?
I created a channel using 2 separate power sources. However, these sources of tension are two differentials through other channels on the DAQ card. Is there a way to put my physical as something like channels ' premium w / channel xxx "?
-
How can I find my Sim card number
How can I find my Sim PIN code
-
Who published an e-mail from quarantine?
Is there a way to know which user has released an email from the quarantine on the ASE or AMF? The newspapers will display something like mid-1361, freed from quarantine 'Policy' (manual) but won't show what actually released the email user. Thank yo
-
BlackBerry smartphones can not access my bb app
Forgot my secret answer to unlock my bb app world