An error occurred applying attributes to the file. Access is denied?
Hello
I use Windows 7. I reinstall my Windows 7 and since then, most of my file become encrypted (Green shows in Explorer).
I came across a strange behavior where I am not able to use or to decrypt files. I dint knew the encryption.
I am the administrator on my computer running Windows 7. I get the following error
I have no key encryption nor do I created everything. I tried the following: "An error occurred applying attributes to the file: C:\Program Files\Windows Collaboration Access is denied. Ignore. Ignore everything. Try again. Cancel. » It is a small very annoying problem that I need to have go further, any help would be appreciated! Points to note: Safe MODE does not help. I do not know of the all other folders that Act up like this. Please let me know what happens! THESE FILES ARE VERY IMPORTANT Hello 1. what security software is installed on the computer? 2. what version of windows 7 is installed on the computer? 3. of what exact file you try to remove the encryption? 4. have you installed windows on the C partition or another partition? Method 1. To resolve this issue, give the system security principal of full control on the System Volume Information folder. NOTE: The System Volume Information folder is a hidden operating system folder. To display the folder in Windows Explorer, follow these steps: 1. in the Tools menu, click Folder Options. 2. on the view tab, clear the Hide protected operating system files check box. Follow the steps in this article and give full control permission to the folder. Appropriating a file or a folder: http://technet.microsoft.com/en-us/library/cc753659.aspx Method 2. I would like to create a new user account and check if the problem still persists. Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted. Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile Method 3. You can run the Microsoft Safety Scanner to make sure that the computer is virus-free. Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. For more information: the file must be decrypted by the user who encrypted the file. The files are encrypted using the Encrypting File System (EFS) are accessible only to the person who encrypted the file, regardless of the other permissions on the file. I suggest you to visit these links for more information: http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file
http://Windows.Microsoft.com/en-us/Windows7/use-a-smart-card-for-file-encryption http://Windows.Microsoft.com/en-us/Windows7/what-is-encrypting-file-system-EFS I hope this helps. Tags: Windows an error occurred applying attributes to the file When I try to open some pictures, the system denies me access, I tried their decryption but get an error message and it says access denied. This has happened since the reinstallation of Vista, e efiles are stored on an external drive. In Windows Explorer on the root of the drive, right click and click Properties. Go to the Security tab. Add your name to the list of authorized users and give you all the rights and don't forget to check the box to apply it to all the files and subdirectories as well. Then click Advanced and do essentially the same thing in the special permissions section. Make sure that the special permissions section does not deny access to all user - if so, change it to allow access (at least read only, but no matter what type of access will make - if rejected, this entry overrides everything else). While in the Advanced section, click the property tab and you make the owner of the car (and new check box to apply to all files and subdirectories as well). This should solve the problem. If you are unable to perform the tasks (you're stuck on a file or folder), try to change the folder or file directly and once done restart the whole process. If you can't, move it temporarily to the reader until you have done the rest and then go back and try again to change - especially if it's the folder or file you are talking about. If you still have problems with this file/folder and the following articles didn't help, after return by explaining exactly what happens or does not happen when you try to change it and I'll see if I can identify a reason and help fix you. Here is some additional information about the permissions and ownership in the case where you have problems or you want more details about procedures: To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/. I hope this helps. Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. original title: when TRYING TO REMOVE FUJI Film 'FINEPIX STUDIO' FILES from the CD-ROM, I get ERROR CODE 5, "DELETE FILE FAILED, ACCESS IS DENIED" Charge FINEPIX STUDIO CD, pictures changed, closed the program and it wont let me open it. Tried to uninstall the program, but getting the message above E-mail address is removed from the privacy *. An error occurred in the attributes that apply to the file, access is denied An error occurred applying attributes to the file Hi Richard, An access denied error message may occur for one or more of the following reasons: I suggest you try the steps from the following link: "Access denied" or other errors in the access to or work with files and folders in Windows http://support.Microsoft.com/kb/2623670 Post us the results once you try the steps above. An error occurred while polydioxanone interface area connection access is denied. Hey Microsoft, It comes to Raja, while I use the santely system, I got follwing error. "An error occurred during polydioxanone interface area connection access is denied." I use mission of Xp to windows that it is connected on the field. please me like this what should I do? Hello Rajas_king, Your Windows XP problem would be better suited in the TechNet forums since you are in a domain environment. Sincerely. Marilyn access denied for the creation of a directory When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this? Only when you try to install this application? What about BullZIP PDF Printer? (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.) Error message "network error occurred trying to read the file" xnafx30_redist.msi I was download microsoft touch pack for windows 7 when I received the following message: "network error has occurred trying to read from the file c:/programdata\applicationcache\xnafx_30redist.msi" and the download stopped. I have a hp touchsmart computer, running windows 7, sp1. is there a conflict? What can suggest you or will they still co-exist? Thanks for any help for the beginner! Hello 1. don't you make changes to the computer before the show? Method 1 How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 Method 2 Hello I install BIAPPS 11.1.1.8.1. I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6. I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error: "Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'. Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow. Thank you. Hello I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade... Do all this, then upgrade will be smooth. Thank you Cannot delete the file, access is denied try to format the old drive hard could not Schroeder7952, To add to what mysoul said, you can also try the following: To resolve this problem, you must turn off Simple file sharing, and then take ownership of the folder: 1. Turn off Simple file sharing: one. Click Start and then click my computer . b. On the Tools menu, click Folder Options , and then click the view tab. c. Under Advanced settings , clear the use simple file (recommended) sharing , and then click OK . 2. Right click on the folder that you want to take control and then click Properties . 3. Click the Security tab, and then click OK in the Security message, if an unknown device appears. 4. Click Advanced , and then click the owner tab. 5. In the name list, click your user name, administrator , if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of this folder, click to select the check box Replace owner of subcontainers and objects . 6. Click OK . You may receive the following error message, where folderis the name of the folder you want to take care of: You are not allowed to read the contents of directory folder . Do you want to replace the the directory permissions with permissions granting you full control? All permissions will be replaced if you press Yes. 7. Click Yes . 8. Click OK , and then reapply the permissions and security settings that you want for the folder and the contents of the folder . More information can be found in 810881 KB. Lisa Cannot open the file, access is denied I recently put a password on my user in XP Pro, and when I went to reconnect it does not recognize the password. Not sure if I've mistyped when I entered it or what. I logged in SafeMode as administrator, removed the password of this user, and he gave me a message about the saved passwords, etc. I am now able to connect to my user, but all the files that I had encrypted long ago now cannot be opened. I tried to decipher them and I get access is denied message. I can not open them as an administrator. Any thoughts? Now that I got the login figured out, I returned and changed the password to an old password and now I have access to these files. Decryption of now. Error applying attributes to the file... access denied I had encrypted a file with the other subfolders inside and now it will not read, I don't think what he encrypted correctly because I have not set a password but its my first time encryption so I don't know. Help, please! Hey CHAOS-AION,. Follow the steps listed in the link below: how to remove encryption from a file or a folder in Windows XP:http://support.microsoft.com/kb/308993 Here is a link that gives you the steps on how to encrypt a folder in Windows XP:http://support.microsoft.com/kb/308989 With regard to: Samhrutha G S - Microsoft technical support. Visit our Microsoft answers feedback Forum and let us know what you think. A network error occurred trying to read the file c: WINDOWS\Installer\iTunes.msi I'm not able to go to iTunes or watch videos on my program Corel due to an error in Quick Time. It keeps telling me that I need to improve my Quick time and when I tried it wouldn't let me so I tried to remove it and couldn't because of an error and then I came here to get the Windows Cleanup utility and who eventually removed the program out of my control panel and I thought that would fix it but it didn't and now it gives me this message. What should I do now? Ok! "Error 1316. A network error occurred trying to read the file C:\WINDOWS\Installer\kis.en.msi" Working for days trying to set up my latest software - appears to download from the site OK and runs through the entire installation to the right at the end, then shows code error above. I don't have any idea how to solve this problem - many attempts to find a solution/updated via Windows update site fail too miserably. Any suggestions gratefully received! Has taken a lot of time and a lot of past backward and forward over problem. Finally I had to remove all the previous editions of the software and perform a clean installation of the new version. Now faced with W7 questions! It will never end... network 1316.A error error occurred trying to read the file: C:\windows\Installer\KAVKIS.msi Try to uninstall Kaspersky Anti-virus 2013. Hi William,. I understand that you get a 1316 error message when you try to uninstall Kaspersky Antivirus 2013. I suggest to refer to the following article and check if it helps. Installation/uninstallation of Kaspersky Anti-virus 2013 error: Error 1316. Impossible to install the application Activation error. Activation procedure returned an error 1316 http://support.Kaspersky.com/4713 If the problem persists, I suggest you to contact Kaspersky support. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you. I am trying to print a receipt in PDF format from a printer is currently unavailable for me, but I get an error which prevents me from printing to file. Please see attached screenshots in chronological order. Given that I can't add images directly to this issue (page is hindering you try to download a 107KO .jpeg), screenshots are listed below in the following links: First: http://i.imgur.com/GTz9A1t.jpg Hi m.patterson,. A suitable workaround can be circumvent the printer software using some print to pdf add on such as: Today, January 23, I have download firefox 17.0. How can I get? I did the automatic update of the version 17.0 to 18.1.My Bank, Banco do Brasil, who informed me on the phone that the 18.0.1 version is a beta version (SIC), and if I want to access my bank account there, I come to version 17.How can I download and problem with running my games more old and newish on Windows 7. __ Why is there such a probllem with my older games running and more newish on Windows 7.If I knew that I would probably be stuck with vista or XP A saved in Spider Solitaire, game later returned and finished the game. Here's where the problem lies, he continues to set up the backup game box. How do I possibly or delete the saved game and stop recording up box? Cannot delete files and music always there but not display upward when I connect to the computer? Hi all Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again. That's where the real problem started. For some reason I can't delete three of the albums on my player. Each o Many friend... small questions will soon tear my head off! Hey guys... well so where to start. I've just set up my desktop computer new, not wireless upward at the place that that we just moved. Here's how everything is connected: Router cable - Switch (EZXS88W) - (WAP54G) - old girlfriends Mac -Ethernet to
--------
An error occurred applying attributes to the file.
Access is denied.
--------
When I right click on the file > properties > go to advance > uncheck the encryption > apply changes > continue (user account control) > I get this...
I am logged on as administrator, what makes it more frustrating.Similar Questions
Click here to transfer your question in the Windows XP forums on TechNet.
2. which web browser is installed on the computer?
I would say you can do clean start and then try to install XNA Framework. When you perform the clean boot, make sure that you disable all antivirus programs.
http://support.Microsoft.com/kb/929135
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.
I suggest you to uninstall XNA Framework completely, and then download and install XNA framework from the following link. Once you install XNA Framework then Touchpack.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20914
all files deleted but can not delete 2 files adobe indicates that access is denied
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
This problem occurs in all applications in all environments such as Windows XP, Amiga and Windows 7. I have only my current computer with Windows 7 64 bit related to the problem. After following suggestions to cure the problem without success, I read the error message that displayed the MSI being read in C:\Windows\Installer. There is no such MSI placed in this directory. SO to solve the problem, you must put some Apple msi installation which gives the error message in the C:\Windows\Installer directory. Just drag it directly into the directory. Do not use any subdirectory. If your don't have a copy of the MSI, you can extract it from the EXE installer with a program like WinRar. My problem was with iTunes to bleed the system looked like this C:\Windows\Installer\iTunes64.msi. Run the MSI file or the original from Apple download. It worked for me as expected if you give it a try.
http://support.Kaspersky.com/9600
Second: http://i.imgur.com/KIpTpIV.jpg
Third: http://i.imgur.com/GTQQaBA.jpgMaybe you are looking for
