An error occurred during communication with the server

Similar Questions

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

• Can't send or receive messages on behalf of Verizon (tdwolfe2). A timeout occurred during communication with the server.

  This message box appears quite a bit. All I have to do to solve it? Thanks for any solid help. MW

  Hi Mary,

  Please contact the Microsoft Community forums.

  It seems that you are unable to send or receive messages on behalf of Verizon.

  He would be grateful if you could answer a few questions to refine the question.

  1. What mail client do you use? What is customer e-mail based on the web or Microsoft Outlook client?

  2. are you aware of changes to the computer before the show?

  3. do you use Internet Explorer to access e-mail? If so, what is the version installed on the computer?

  This question seems a temporary problem with the server and you can consult again later.

  If you use Internet Explorer, you can perform the steps described in the article.

  The problems of access to webmail using Internet Explorer

  http://support.Microsoft.com/kb/2483955

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  If you use the Microsoft Outlook client, you can post the question here.

  http://answers.Microsoft.com/en-us/Office

  If you use Windows Live, you can post the question here.
  http://answers.Microsoft.com/en-us/windowslive

  Hope this information helps. Get back to us if you have more queries about Windows.

• F2480 An error occurred during communication with the HP imaging device

  I've been troubleshooting for hours, the solutions provided by HP do not fix the issue. I get the following scanner twain, preview is loaded and crashes for no apparent reason, then after a few minutes, the error is displayed.

  

  I have Windows 8.1 Pro 64-bit. I have been using this device with previous versions of Windows without any problem whatsoever. I have been using Windows 8 with no problems whatsoever. This problem however makes me crazy. And apparently I'm not the only one... Without the help of HP in sight, I'm about to go get a replacement no HP.

  I'm sorry to say this weekend that I unplugged the unit, I uninstalled all the drivers and software HP and I am now using a new device from another manufacturer. I think it was simply a problem of compatibility between software and drivers and Windows 8.1, and given the age of the unit, I was expecting HP to solve.

  Thanks for the trouble, if.

• 0 x 80041006 "a network occurred when communicating with the game server"

  Today I got this error message when you try to connect to Internet Spades - 0 x 80041006 "a network occurred when communicating with the game server".  Same thing happens with Internet Backgammon.  Has anyone else had this problem, nobody has found a solution please?

  Patti

  Hi Syed,

  I was able to access all aspects of the internet, only Internet Spades/Backgammon & checkers that are on my PC, all gaming sites like Yahoo & Pogo were available.  A few hours later everything was back to normal, so I think it may have been an error of site specific to these games.  Thank you for your advice I will hold firmly in case of future problems.

  Concerning

  Patti

• Error during communication with the remote host when you create the new virtual machine

  I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

  on the vcenter Server

  At the end of 30-35 minutes, it gives an error

  "Error during communication with the remote host"

  The existing machines are working well... I tried to create virtual machines to other ESX servers as well

  but the same question. I also tried to make the clone of existing machines, but without success

  Can anyone help?

  You rescan the LUNS once?

  You've restarted the management agent?

  You've restarted the vpxa?

  If this isn't the case, please perform the step above and check out them.

• First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst > error occurred during initialization of the virtual machine;

  Hi my community developers estimated!

  I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.

  However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:

  QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.

  Thank you very much!

  Please see from the log of the errors below:

  Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
  Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
  Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
  Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
  Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain

  2014 BuildDefaultDomain2.py - 07-04 18:00:03

  cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
  Process began
  WLST > error occurred during initialization of VM
  WLST > could not reserve enough space for lots of things
  WLST > error: could not create the Virtual Machine Java.
  WLST > error: a fatal error has occurred. Program ends.
  Elapsed time: 437 ms

  Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

• I can't send or receive email from my email account. Not 0x85ad3202 error code "no connection with the server.

  original title: email problem

  It was something I did on 'email settings', I think, with the POP3...? Think I might have my gmail sent to my msn account... I can't understand.  I can open all the files, sent mail, etc... but cannot send or receive e-mail from this account.   It works on Hotmail on other computers and even this same computer.  get the error code: 0x85ad3202 "no connection with the server?   Thank you for any suggestions/help DJ

  If you need help with MSN, experts are loitering in the forums 'on-line'.

  Windows Live Solution Center
  http://windowslivehelp.com/

• message error "there was a problem communicating with the server.

  for about a week or two, when I log onto my site from Bank everything now is verrrry slow and when I finally get through the newspaper in steps, the error message indicates the site. Sometimes I can finish the task at hand, even if it takes forever. Other times stays just off the screen with the wheel spinning, and I end up closing the browser. I deleted the cache and history. I made sure not to have only one firewall / virus protection activeated. I have reset Firefox. Pages to fill up more quickly now, but still slower than before. Do not know what is happening.

  You could try to disable some or all your extensions/add-ons or plugins as content blockers etc, restart FF, then reactivate selectively one by one.

  It helped me a few times to find out what makes slow FF.

• An error occurred during registration of the IBR WinNativeConverter component

  Manager components-> BOVINE infectious rhinotraecheitis select WinNativeConverter, update, restart IBR.
  
  When I logged in IBR, after the error message displayed.
  
  I think that the ActiveX control cannot register, please let me know if there is a solution.
  
  [Error Messages] ==============================================================
  The conversion of 'Outside In Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
  
  WinNative system error Converter: the conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
  System HTMLConverter error: conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
  ========================================================================
  
  
  OS: Windows 2003 R2 Enterprise, 64-bit
  University Complutense of MADRID: 11 GR 1 material PS5 (11.1.1.6.0)
  
  
  [Detailed error messages] =.
  ! csPdfOIXError2, did not correct path.
  < br >! syExceptionType, java.lang.Throwable
  java.lang.Throwable
  to pdfconverter. PDFCInstaller.postErrorNotice (PDFCInstaller.java:189)
  to pdfconverter. PDFCInstaller.configureOIX (PDFCInstaller.java:126)
  to pdfconverter. PDFCInstaller.configureWindows (PDFCInstaller.java:81)
  to pdfconverter. PDFCInstaller.doFilter (PDFCInstaller.java:63)
  at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
  at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
  at docrefinery.server.RefSystemLoader.executeFilter(RefSystemLoader.java:321)
  at docrefinery.server.RefSystemLoader.doFilter(RefSystemLoader.java:197)
  at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
  at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
  at intradoc.server.IdcExtendedLoader.executeFilter(IdcExtendedLoader.java:462)
  at intradoc.server.IdcServerManager.init(IdcServerManager.java:211)
  at docrefinery.server.RefServerManager.init(RefServerManager.java:67)
  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:625)
  at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:456)
  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:102)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1273)
  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:547)
  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
  to idcservlet. IdcFilter.init (IdcFilter.java:156)
  to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
  at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  ========================================================================

  If I had to guess (part of the stack is not present trace) and this configuration under Windows, I would say something was installed in a path with spaces.

  -Maybe the Java runtime was installed at something like "C:/Program Files/Java.
  -Maybe the House of Middleware has a space in the path.

  A less likely scenario is that the user account running the IBR process has insufficient permissions to install the OCX, or to read the path where the OCX has been installed by another user. This might occur if you install the software using the Windows "Administrator" account, without using the server of the infectious BOVINE as "MyServiceAccount rhinotraecheitis."

  I think maybe this tidbit in the installation documentation, but for the IBR on Windows, it is imperative that the same account user will be used to install all software components. It may be less important in this case because the ILO is used, but it is still a solid strategy. (I saw in the struggle of people for days trying to understand issues IBR on Windows because they used several users to install the individual pieces - IBR, a printer, Ghostscript, office. They have always had to reinstall using a single user).

• Fatal error occurred during installation of the file. The willingness of cleanup now install and get out. so that the installation of BIAPPS 11 g

  Hello

  I install BIAPPS 11.1.1.8.1.  I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6.

  I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager

  at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error:

  "Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'.

  Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow.

  Thank you.

  Hello

  I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade...

  Do all this, then upgrade will be smooth.

  Thank you

• Need help: error communicating with the server on boot up

  Anyone an idea what server it could be? I received this alert after starting my Mac Pro (OSX 10.7.5):

  He didn't identify which server, what app or anything like that. I wonder if I should do a virus check. If someone things

  can a good idea, it's been so long I've owned a virus app, anyone recommend some?

  Thank you

  Steven

  

  I don't know a good way to identify which application raised the dialog box, except via the menu bar.   If you have selected the dialog box, see if the name of the associated application is upwards in the menu bar.

  Otherwise...   What elements of openness are present?   System Preferences > users and groups > login items.    Except maybe iTunesHelper, hover over the name of the application to get the path to the application, and then delete the entries you do not use or don't recognize, please disconnect and reconnect and see if the prompt disappears.

  Otherwise, open Console.app from Applications > utilities and see if you can find a server connection error connected there.   There will be a lot of messages he and some will be pretty obscure or maybe even bad omen, and the deluge of text can be quite normal.   You are specifically looking for an error in Server connection with a timestamp at the time dialog box appears.

  If you can not solve this problem from the steps above, then download and run Etrecheckand post the diagnosis report here and maybe someone can spot a package that raises this dialog box.

  OS X 10.7.5 is quite far back that there may be problems to establish a secure connection, but it's a full proposal.  If your Mac allows, consider an upgrade to a newer version of Mac OS X.

  Antivirus and Anti-malware packages have a long and sordid and increasingly questionable history and its effectiveness lately - by the industry itself - was rather less than 50% (and I suppose, fall), and the software has caused more than a few problems with stability and reliability.   Most people with OS X get put into bags by installing malicious software themselves, or through the so-called phishing; try to get the user to install the malware, or open access to the system to allow the attacker to connect and install malicious software.

  Keep all Gatekeeper to allow only to App Store and identified the developers (System Preferences > Security and confidentiality), configure, and maintain Time Machine or another backup running tool and do not install anything you didn't pick.   I would probably also either disable or remove Microsoft Silverlight, Adobe Flash and Java from Oracle, or at least keep them current and get a blocker plugin, because these are some of the most common paths to the Junk onto a system, if it is not directly installed by the user.

• system restore an unspecified error occurred during restore of the system... why it can not restore for me?

  I tried to restore my system 3 times because something is wrong and I wanted to get back to normal... but it keeps saying

  Hi, Doris.

  An analysis of the system by using the System File Checker

  Start > type CMD

  If you are using Windows Vista and Windows 7, right click on the CMD window and select run as administrator

  If you use Windows XP, press ENTER to open the command prompt window

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228.------

  If it is missing or damaged you will be asked for your Windows Recovery CD/DVD files so please with it.

  You can also view the solutions proposed in these discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-am-unable-to-perform-a-system-restore-how-do-i/d80e54ae-2829-4270-B032-455d017172b4

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-do-a-system-restore/1ef52b3f-ff34-461D-9813-a95d341e2afd