An error occurred when accessing the Windows CardSpace...

Similar Questions

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• Error occurred when parsing the plug-in software

  I'm upgrading to 11g 11.1.0.1.0 Cloud control grid control 12.1.0.3.0 using 1-system approach. And I patched to the pre-upgrade console.

  After that I downloaded all the agents and plugins form upgrade to Oracle Enterprise Manager Cloud control 12.1 & lt; / title & gt; & lt; meta name = & quot; Title & quot; content = & quot; Upgra...

  When I try to validate the software, you can validate only agents, for the plugins, it displays:

  I use the root user, and zip files are all 777, unzip it works, I can see the plugin_bin file in my directory, but it is empty

  Thanks for any help!

  Error occurred when parsing the plug-in software. Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.em.smss_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.db_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.emrep_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.csa_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.beacon_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.emas_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.oh_2000_0.zip

  Hello

  Please note the plugin software used in the upgrade page 12 c Console is different from the one used during the upgrade of the WHO, so please make sure that the correct software is used

  1. navigate to the following location, where the binaries of software are installed and verify the plugin .opar file listed in the error message:

  $ cd <12c_OMS_HOME>/sysman/install/undeployed_plugins

  If available, copy them to a location that is accessible.

  2. If the plugin Internet files do not exist in the 12 c SGD Oracle Home, then download and stage the agent and software plugins correctly in the intermediate directory from the following URL.

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/OEM-upgrade-console-502238.html

  After you download the software and verify that the intermediate directory is properly referenced, run again the validation of the software.

  Check also the steps are as

  EM 12: the upgrade of the 11.1.0.1 Enterprise Manager on Linux x86_64 to 12.1.0.1 with method 1-System (Doc ID 1364931.1)

  Kind regards

  Rahul

• ODI-40837 ERROR: an error occurred when creating the schema

  Hi I'm testing a file xml server and receive the following error message.
  
  ODI-40837 ERROR: an error occurred when creating the schema: ODI-40738: SAXException has been surprised by reading the model saying: expected 'DOCTYPE '.
  
  
  JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml & ro = true & DOD = YES
  
  could someone help because I can not find any blog or documentation on this error?
  
  Thank you
  
  Published by: user626688 on May 31, 2013 13:26

  There seems to be a problem with your xml file. Please work with channel support to investigate this issue.
  You can also view the details of settings xml driver to http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Error occurs when applying the patch 9239089 pre-installation tasks

  Error occurs when the application of pre-installation tasks of patch 9239089
  
  ----------------------------------Pre-install Tasks--------------------------------------
  4. use SQL * more to run the script:
  
  UNIX:
  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql < name of the APPS schema >
  
  ----------------------------------error message---------------------------------------
  
  End of creation of Package PL/SQL AD_DBMS_METADATA.
  
  DECLARE
  *
  ERROR on line 1:
  ORA-20000: ORA-00933: SQL command not properly endedError in
  ad_grants. Give_grants
  ORA-06512: at line 685
  
  
  
  Validation complete.
  
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  Thank you
  Jackie

  Jackie,

  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql

  You must run the script as follows (replace with apps):

  SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql apps
  

  Thank you
  Hussein

• Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057

  So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.

  At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.
  I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.
  Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!
  I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.
  Since I was:
  -Make sure SSD has been selected for AHCI (it was already on it)
  -Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
  -Run Diskpart to repair the boot with these commands:
  -diskpart
  -disk list
  -select disk 0
  -clean
  -output
  Same error code came again after attempting to reinstall. So I tried a few other commands:
  -diskpart
  -disk list
  -select disk 0
  -clean all the
  at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.
  Someone please help!

  Try to create the new partition and do. for example, to verify the steps for Windows 7-

  http://support.Microsoft.com/kb/2476568/en-us

  Likewise, create a partition first.

• Error 1719. cannot access the windows installer

  Hi, try to install game and get the 1719 message cannot access also same message from windows install when I try to download quicktime, my vista operating system 32-bit service pack 2, where I can get a download of windows install for my system or solve this problem.

  Hello

  You did changes to the computer?

  Method 1: Run the fixit for problems installing

  See the site mentioned below

  http://support.microsoft.com/mats/Program_Install_and_Uninstall.

  Once the fixit is installed, restart the computer and check with the question.

  Method 2: The empty user and system 'temp' folders

  a. Click Start, type %systemdrive%\temp and press ENTER. Select all and empty this folder

  b. Click Start, type %systemdrive%\Documents and Settings\%username%\Local Settings\Temp and press ENTER. Select all and empty this folder, too.

  (some files may not be deleted you can ignore them.)

• Error occurred when downloading the iOS on iPhone 6s 9.3.2

  I tried many times to download this update and it still shows 'an error has occurred while downloading', what can I do?

  Restart your iPhone, and then try again.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Is best to connect the iPhone to the charger to update to iOS, not only on the battery.

• ' Error occurred when converting the file 'name of the song. The required disc could not be found. "

  OK, so I got a new iMac 5 k and restored my iTunes library by dragging the system files to the new machine via the time machine (I didn't want to just restore from my old mac).

  While trying to copy a cd to my iMac (via an external cd drive) I get the message below. I searched the darkest depths of the internet for a solution without success. Many people seems to receive this message when they have their iTunes on an external hard drive and the only reason why, I guess it's a problem for me is due to the fact that I imported time machine. I followed the steps suggested for these people (which includes iTunes will > Preferences > advanced and then to change the location, but that seems not work.)

  Any ideas?

  Thanks in advance

  

  Well I hope that you have solved this problem now, but if you don't have the answer for me was to use one of those USB "Aristide" leads on my CD/DVD drive Samsung external. They are the kind of son who have a mini-USB input in the drive, but two USB inputs in the computer. Which delivers more power to the drive.

  I got the idea from a post here a few years ago. Re: Error importing to iTunes on CD. The required disk cannot be found.

• A serious error occurred when exporting the message?

  Im just trying to export my project. First works perfectly when editing long hours.

  When you export, I get a serious error. So serious... SERIOUSLY!

  Weird solution, but the problem is solved!

  «Click to navigate to the folder in the Finder menu go & Type ~/Library > preferences > Adobe and rename it to Adobe.old or add your name in the list with the permission of reading writing.»

  http://forums.Adobe.com/message/6091079#6091079

• Error occurred when using the compiler CAP

  I developed a J2ME MIDlet program that can run on the mobile phone. Now, I want to run it on the BlackBerry. I tried to use the compiler CAP to change the .jad and .jar format .cod files. However, he returned the following error message.

  Error! : offset of field too big for: cmdJobDetailGoToTop

  It should not be a java error.

  Someone has seen this before and how to solve?

  Thank you very much

  This error indicates that the class containing the data member cmdJobDetailGoToTop has too many data elements of members where the upper limit is 512 words.  It is worth noting that the number of double and long for two words in this upper limit.

  Finally, the members of the classes of database would contribute to this indictment as well.  To resolve this problem, you must reduce the number of data items in this member.

• When install or remove a product, get error cannot access the windows installer

  Whenever I'm installing an update or remove a product, I get the message "Cannot access Windows Installer"

  Hello

  ·        What are the programs you are trying to install on the system and updates?

  ·        Have you managed to install the updates before on the system without any problems before?

  ·        Remember to make any change to the system?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you to check in services if the service Windows install is set to automatic. Follow the steps mentioned below.

  a. Click Start--> Run--> "services.msc" [press on enter]

  b. scroll down and find "Windows Installer".

  c. right-click on it and choose "Properties".

  d. on the properties page, verify that the "Startup type" is set to 'Automatic'

  e. confirm the "Service status" is "started."

  f. click "OK".

  Method 2:

  I suggest you unregister re-register Windows install and check if it helps. Follow the steps mentioned in the article below.

  Error message "Could access the Windows Installer Service" when you install the application

  http://support.Microsoft.com/kb/319624

  Method 3:

  I suggest you to reset the windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4:

  I suggest you to download and install Windows install from the link below and check.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  I suggest you follow the steps mentioned in the articles given below for further assistance.

  Error message "Could access the Windows Installer Service" when you install the application

  http://support.Microsoft.com/kb/319624

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Some error occurred while processing the requested tasks.

  Input server name correct POP3 SMTP Server SMTP port 25 protocol secure (SSL) socket error 11001 error number 0x800CCCOD

  Hello

  Before you help out us, we need of more information about the issue.

  • Exactly when you receive this error message?
  • You receive this error while using any client e-mail like Outlook or Outlook express to access the emails?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?

  If you get this error message when accessing the customer to email such as Outlook or Outlook express, you can access the link below and follow the steps described in the article and check if that helps you solve the problem.

  http://support.Microsoft.com/kb/813514

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.