An impasse

I want to spend my macbook pro at el capitan to lion mtn but have lost my recovery disc. should I make a clone of my hard drive, or simply make another recovery disc. I don't want to start downloading CBS without returning MT so

necessary.

Just as important to create before the upgrade is a backup of everything.

Given that your Mac is running Mountain Lion, you can buy El Capitan using the App Store on your Mac.

Tags: Mac OS & System Software

Similar Questions

  • My old desktop with windows xp pre-impasse manufacturer has just failed the test of authenticity

    My old compaq with windows xp pre-impasse manufacturer office just fail the test of authenticity, and I lose the internet connection (even after rebooting).  How can I get this problem?

    I checked that my wireless router works fine so that cable exit/ethernet LAN to my office are also working.

    Help, please!  Is there a toll free number to call?  I'm not too tech-savvy.  Thank you!

    I think that all your problems are caused by infections "hijackware.

    If doing the clean install, etc., is outside your comfort zone - and there is no shame in admitting this isn't your cup of tea - take the computer to a local, reputable and independent (no BigBoxStoreUSA or Geek Squad) computer repair shop... If you think that a 8 + year old computer worth the expense that would be.

  • Oracle multithreaded process Proc * C impasse

    Hello

    I have a multithreaded (10 sons) in Pro * C process, which quickly changes/deletions of data in a particular table (30 rows k) at the rate of almost 300 times per second. This results in a blockage in my alert log.

    I have increased by 10 to 80 inittrans and the first measure of 10 MB to 100 MB. Also pctfree % has been increased to 60 percent, from 20 percent, but there are still blockages.

    What else can I do to solve this problem.

    Kind regards
    Karan

    Karan,

    In most cases, the blockages are caused by the application. In your case, it is likely that a single thread does something that blocks another thread, but this second thread is something that blocks the first.

    The trace file that is produced for the impasse will explain what is really happening

    John

  • Identify an impasse resources graphic with 1 line and 1 table lock

    Hi, I ran into occurrences repeated event deadlock graph at the bottom of this post and a few questions about this:

    1. it seems that proc 44, session 548 holds a line lock (X). Is the boy, proc. 30, session 542, is trying to acquire a lock line (X) also or an exclusive table (X) on the table lock that contains this line?
    2. under what circumstances would be something keep an exclusive table lock on line (SX) and to upgrade that to an exclusive table lock part (SSX) online?
    3. our cxml_foldercontent table contains a column "structuredDataId" with a cxml_structureddata.id FK and a trigger ON DELETE SET NULL. This would help to explain why a "update" for a table (i.e.g cxml_foldercontent) would also need to acquire a lock on a foreign table, cxml_structureddata?
    4. What is the difference between "current SQL statement:" and "for the session current SQL statement:"? This terminology is confusing. Session 542 running "update" or "delete"?
    5. in the ' waiting lines: "section is - this mean 542 Session expected on obj - rowid = 0000BE63 - AAAL5jAAGAAA6tZAAK or that it is has the lock on the same row, and other things are waiting on this subject?

    A couple of notes:
    -the cxml_foldercontent.structuredDataId FK column already has a clue on this subject
    Deadlock graph:
                           ---------Blocker(s)--------  ---------Waiter(s)---------
    Resource Name                    process session holds waits  process session holds waits
    TX-003a0011-000003d0        44       548     X               30        542             X
    TM-0000be63-00000000       30       542     SX              44        548     SX    SSX
    session 548: DID 0001-002C-000002D9     session 542: DID 0001-001E-00000050
    session 542: DID 0001-001E-00000050     session 548: DID 0001-002C-000002D9
    Rows waited on:
    Session 542: obj - rowid = 0000BE63 - AAAL5jAAGAAA6tZAAK
      (dictionary objn - 48739, file - 6, block - 240473, slot - 10)
    Session 548: no row
    Information on the OTHER waiting sessions:
    Session 542:
      pid=30 serial=63708 audsid=143708731 user: 41/CASCADE
      O/S info: user: cascade, term: unknown, ospid: 1234, machine: 
                program: JDBC Thin Client
      application name: JDBC Thin Client, hash value=2546894660
      Current SQL Statement:
    
    update cascade.cxml_foldercontent set name=:1 , lockId=:2 , isCurrentVersion=:3 , versionDate=:4 , metadataId=:5 , permissionsId=:6 , workflowId=:7 , isWorkingCopy=:8 , parentFolderId=:9 , relativeOrder=:10 , cachePath=:11 , isRecycled=:12 , recycleRecordId=:13 , workflowComment=:14 , draftUserId=:15 , siteId=:16 , prevVersionId=:17 , nextVersionId=:18 , originalCopyId=:19 , workingCopyId=:20 , displayName=:21 , title=:22 , summary=:23 , teaser=:24 , keywords=:25 , description=:26 , author=:27 , startDate=:28 , endDate=:29 , reviewDate=:30 , metadataSetId=:31 , expirationNoticeSent=:32 , firstExpirationWarningSent=:33 , secondExpirationWarningSent=:34 , expirationFolderId=:35 , maintainAbsoluteLinks=:36 , xmlId=:37 , structuredDataDefinitionId=:38 , pageConfigurationSetId=:39 , pageDefaultConfigurationId=:40 , structuredDataId=:41 , pageStructuredDataVersion=:42 , shouldBeIndexed=:43 , shouldBePublished=:44 , lastDatePublished=:45 , lastPublishedBy=:46 , draftOriginalId=:47 , contentTypeId=:48  where id=:49
    End of information on OTHER waiting sessions.
    Current SQL statement for this session:
    delete from cascade.cxml_structureddata where id=:1

    That basically there a sense today?

    Lol your description is more on linked in memory on relational tables and indexes lists!

    This means that there is a more verbose parameter for these traces of the impasse?

    Lol other SQLs would also be included in the deadlock trace.

    Hemant K Collette

  • Impasse in Coldfusion 8

    We had a server with ColdFusion 6 and SQL server 2000. There was a scheduled task in ColdFusion server which ran every morning that you updated databases in SQL server.

    2 weeks ago, we replaced the server (the machine) with a new one. In this process, we have upgraded to Coldfusion 8, but has not changed the version of SQL server. It is still 2000. I made sure that all of the settings in CF8 is the same as in CF6. Nothing in the regular process was changed or the other.

    Since we made the switch, the file MTC of the scheduled task in ColdFusion server running no queries all the way through and I see this error in the application log:

    "Database query error. [Macromedia] [SQLServer JDBC Driver] [SQL Server] Transaction (process ID 54) has been blocked on the resources of locking with another process and has been chosen as the deadlock victim. Rerun the transaction. "

    I understand why a process is deadlocked in SQL server, but I don't know what could be different between CF8 and Nf6 that causes this problem now. Any help will be greatly appreciated.

    Thank you
    Frederick Hunt

    When I manually run the scheduled task in ColdFusion, the process runs
    No blocking, but when it runs at the scheduled time, which is
    07:00 (when nobody else is logged on), he runs into the issue of the deadlock.

    This is the database that throws the impasse. Everything connects the
    database that can show where multiple applications are coming from?
    Is the update that occur despite the deadlock? Is there a possibility
    that, in some sort, the task has been duplicated so that it runs twice to
    07:00 is on the new server so in combination with other servers?

  • Why did did you spent much time for the integration of the Pocket and not in the resolution of the 'impasse' - vulberability?

    The deadlock problem solved no?
    I think it is more impotant than the Pocket-integration.

    You can also switch the prefs involved to false on the topic: config page.

    • Security.SSL3.dhe_rsa_aes_128_sha
    • Security.SSL3.dhe_rsa_aes_256_sha

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

  • iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

    I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

    Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Reset watch now its impasse on screen saying «please continue installation on Iphone»

    I did the hard reset, pressing the two buttons. Once the apple logo is gone, touching the screen shows only the message.  Does nothing with the two buttons. Pressing 3 times dial raise their voices on the options, but did not help with the message. I tried to pair it with my iphone before I have to hard reset.

    Hello

    Follow the instructions here to set up the watch by using the app on your iPhone:

    Set up your Apple Watch - Apple Support

  • HP CP1215: Impasse of documents in the print queue of the printer

    I am running Windows 7. My printer is a HP CP1215.

    I have a CP1215 and it shows in devices and printers. There are two documents lean back in his queue that will not delete.

    How can I clear all these jobs on queue?  The status of these two jobs is 'delete... '. »

    I turned the printer and turn off many times.

    Hello

    Try after printing HP and Scan Utility below by selecting difficulty printing, it must automatically clear any element from the queue:

    http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

    Kind regards

    Shlomi

  • HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

    computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

    Hi @kelley22,

    Welcome to the HP Forums!

    I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

    The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

    Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

    To print a self-test report, follow these steps:

    • On the product control panel, press Setup.
      The installation menu appears.
    • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
    • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

    If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

    Hope this helps and have a great day!

    "Please click the Thumbs up icon below to thank me for having responded."

  • When I stopped my PC Vista my wireless connection disconnects. I have an adapter DN-7003GT in the impasse.

    Windows Network Diagnostics solves the problem. Put the next time that I shut down the PC he cut once again.

    Hi, Vance,

    Try to use a static IP address

    http://www.ehow.com/how_6197601_set-static-IP-address-Vista.html

    -or-

    Specify the address

    http://KB.IU.edu/data/ajgx.html

  • Get F4400 HP printer works again after the impasse

    Hello AnnV,

    If you are referring to Paperjam as 'dead end', then below are the url to resolve the problem.

    Paper jam

    Kind regards
    Jabzi

    Help the community by marking this post.
    Your question has been answered? Mark it as an acceptable Solution.
    See a great post? Give it a Bravo!
    I work for HP

  • Sticky footer impasse

    Stuck putting a sticky footer on a page. Without the footer, throughout the body of the text is displayed correctly. Add the footer and on the bottom third of the text is not available, that is, when you scroll down you can see only about the upper two-thirds of the text and the rest is not. Page is Lori Caldwell Designs for San Antonio and the hill country. Yes, it's a shame, I am using tables. DW5.5

    For a demo, try to change your background sticky this so you can see the full text.

    background: rgba (255,255,255,0.5);

    Nancy O.

  • image slow VM impassable after the upgrade to Reader 3.0 on Ubuntu 9.10

    I'm running a few images of the machine virtual with Windows XP or Vista, hosted on an Ubuntu machine 9.10 running VMware Player.

    My VM Images became unworkable slow since I upgraded the VMware Player to version 3.0. With version 2.5 that has worked very well.

    I must say, I had a similar problem before, but after the addition of mainMem.useNamedFile = FALSE in the. VMX file it worked perfectly.

    What Iboot the same Windows XP machine and run the same VM from there images using VMware player 3.0 for Windows, it works perfectly (better with version 2.5, in fact).

    Tried all kinds of settings, installed vmware tools update, reinstalled vmware player and even reinstalled ubuntu, but same result.

    Of course, I want to get this thing running with VMplayer 3.0, but I dropped.

    After uninstalling vmware player and reinstall version 2.5, I had this dialog modules must be recompiled. So I clicked on "_install" and got it ' impossible to generate the kernel module error, referring to a log file (see below) no clear no idea why it does not work. "

    + Why the image runs perfect on VMware player 3.0 hosted with Windows XP, but not running on the same version hosted on Ubuntu?

    + Why I can't launch the VMplayer downgraded 2.5 can be found in the compilation of the module error?

    Anyone?

    log file

    15:37:02.162 DEC 02: app | Journal for VMware Workstation pid = 6712 version 6.5.1 = build = build-126130 option = output

    15:37:02.162 DEC 02: app | Host codepage = UTF-8 encoding = UTF-8

    15:37:02.162 DEC 02: app | Login to /tmp/vmware-root/setup-6712.log

    15:37:03.418 DEC 02: app | Extract the sources of the vmmon module.

    15:37:03.431 DEC 02: app | Module construction with the command: / usr/bin/make - C/tmp/vmware-root/modules/vmmon-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/2.6.31-15-generic/build/include CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.4.1

    mainmem.useNamedFile is is no longer the most used on the Linux hosts running VMplayer 3 or 7 Workstation.

    New parameters are:

    mainmem.backing = 'swap '.

    mainmem.backing = 'name '.

    mainmem.backing = "no name".

    See http://sanbarrow.com/vmx/vmx-advanced.html#mainmem

    The VMs use 2 virtual processors? -who should not be about hosts on Ubuntu 9.10

    See

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

  • The impasse caused by the lack of clue on FK?

    Hi all

    I have an interesting case where a blockage has been raised and the research in the trace file, I see
    Deadlock graph:
                           ---------Blocker(s)--------  ---------Waiter(s)---------
    Resource Name          process session holds waits  process session holds waits
    TM-0000b228-00000000        35    1057    SX             32    1068    SX   SSX
    "TX-00090012-00008545        32    1068     X             21    1065           X"
    TX-000a0009-0000bf57        21    1065     X             35    1057           X
     
    session 1057: DID 0001-0023-00000400     session 1068: DID 0001-0020-00000131 
    session 1068: DID 0001-0020-00000131     session 1065: DID 0001-0015-0000000A 
    session 1065: DID 0001-0015-0000000A     session 1057: DID 0001-0023-00000400 
     
    Rows waited on:
      Session 1057: obj - rowid = 0000B277 - AAALJ3AALAAAAL8AAA
      (dictionary objn - 45687, file - 11, block - 764, slot - 0)
      "Session 1068: no row"
      Session 1065: obj - rowid = 0000B228 - AAALIoAALAAAAY5AAP
      (dictionary objn - 45608, file - 11, block - 1593, slot - 15)
     
    ----- Information for the OTHER waiting sessions -----
    Session 1068:
      sid: 1068 ser: 113 audsid: 282002 user: 129/LSM flags: 0x41
      pid: 32 O/S info: user: oracle, term: UNKNOWN, ospid: 23787
        image: oracle@oradev01
      client details:
        O/S info: user: apps1, term: unknown, ospid: 1234
        machine: oradev01 program: JDBC Thin Client
        application name: JDBC Thin Client, hash value=2546894660
      current SQL:
      
    delete from cont_ctrl_prms where id=:1
    
    Session 1065:
      sid: 1065 ser: 740 audsid: 281949 user: 129/LSM flags: 0x41
      pid: 21 O/S info: user: oracle, term: UNKNOWN, ospid: 28912
        image: oracle@oradev01
      client details:
        O/S info: user: apps1, term: unknown, ospid: 1234
        machine: oradev01 program: JDBC Thin Client
        application name: JDBC Thin Client, hash value=2546894660
      current SQL:
      
    delete from availability where handle=:1
    
    ----- End of information for the OTHER waiting sessions -----
    The version of db is 11.1.0.7.0 and the relationship between cont_ctrl_prms and availability is parent-> child.

    There is a FK on availability as below with no rule as delete cascade
    ALTER TABLE AVAILABILITY ADD
        CONSTRAINT FK7710155BB7FB8C0D FOREIGN KEY
        (
          CONTENTCONTROLPARAMS_ID
          )
          REFERENCES CONT_CTRL_PRMS (ID)
    Now my question is: since there are no not delete cascade rule and no UPDATE in question, I assume that this may be caused by the index missing on the CF, so any idea why the deadlock has been generated?


    Thanks in advance.

    Jonathan Lewis wrote:

    It looks like to trace dumped by 1057 session file.
    What is the statement that 1057 expected?

    I have a shot at fixing it fast anyway - here's my deadlock graph event upward:

    I assumed that the SQL code of 1057 access something outside the parent/child, because the id of the object of the line expected was higher than the child object id (not guaranteed to be true, of course, but a reasonable estimate).

    Deadlock graph:
                           ---------Blocker(s)--------  ---------Waiter(s)---------
    Resource Name          process session holds waits  process session holds waits
    TM-00019dbb-00000000        19      43    SX             26      40    SX   SSX
    TX-000a001f-00002903        26      40     X             21      60           X
    TX-0005001a-000032a5        21      60     X             19      43           X
    
    session 43: DID 0001-0013-0000200C     session 40: DID 0001-001A-0000019C
    session 40: DID 0001-001A-0000019C     session 60: DID 0001-0015-00005B0C
    session 60: DID 0001-0015-00005B0C     session 43: DID 0001-0013-0000200C 
    
    Rows waited on:
      Session 43: obj - rowid = 00019DBD - AAAZ29AADAAAAKBAAA
      (dictionary objn - 105917, file - 3, block - 641, slot - 0)
      Session 40: no row
      Session 60: obj - rowid = 00019DBB - AAAZ27AADAAAAGBAAE
      (dictionary objn - 105915, file - 3, block - 385, slot - 4)
    
    ----- Information for the OTHER waiting sessions -----
    Session 40:
    
    delete from parent where id = 1
    
    Session 60:
    delete from child where id = 3
    
    Information for THIS session:
    
    ----- Current SQL Statement for this session (sql_id=1v6ndbw5ypwzy) -----
     update t1 set n1 = 1
    

    Sequence of steps:
    Table t1 has one row.
    Parent table has three lines, p1, p2, p3
    Child table has three lines c1, c2, c3
    The rank of parent/child links are the most obvious.
    The foreign key is declared, but has no support index

    Session 43 delete c2 - laying of SX lock on child (TM/3)
    Update session 60 T1
    Session 40 remove c1, c3 - ask SX lock on child (TM/3)
    session 43 updated t1 - start pending on session 60 (TX/6)
    Session 60 remove c3 - start pending on 40 session (TX/6)
    Session 40 remove p1 - start pending on session 43 - SX to the conversion of SSX (TM / 3-> TM/5)

    Concerning
    Jonathan Lewis
    http://jonathanlewis.WordPress.com
    Author: core Oracle

Maybe you are looking for

  • z620: Startup_z620 weird

    Comrades, I'm trying to upgrade a z620, now 2 X Xeon E5-2690 / 40 GB DDR3 - 1600 ECC / Quadro K2200 / Seagate SATA II, 750 GB / Windows 7 Professional 64-bit. Windows was loaded from the latest z420 recovery partition (2015) in office and running the

  • Thin Client T5550: Central management program

    Operating system: Microsoft Windows CE 6.0 Hello everyone. A few days ago, I asked a question on the HP Device Manager and the answer I got was that HPDM can't stand Windows CE 6.0. And given that HP can't stand my thin client operating system, it is

  • How to uninstall a Live CD?

    In vain, I installed an OS Live CD written in Linux, Ubuntu with my Windows XP. My ASUS A8S has now two additional unknown partitions, 47,69 and 2,00 GB respectively. They are both in good condition, indicated by the computer, but I can not connect t

  • Update CPU R61i

    Hello I have a Thinkpad R61i (8918-DCG). It came with a CPU T5450, and I think to be upgraded to a T7700. My questions are: The processor will work in my laptop? Can I do the replacement? Am I having heat problems, or fans can manage the new processo

  • 1312 nfi MFP color laser: blank white screen

    When on copier, HP blue screen starts initialization and become white, nothing happens, then the screen starts during initialization or print document whites then.