An increase in sound

Similar Questions

• Re: Satellite A660 - 12 X - dead pixel on the screen and how to increase the sound?

  Hello 3 days ago (20 July), I bought this laptop and I have 2 questions: I have a dead pixel (red color) on the LCD screen, I tried to use the java applet:
  http://www.JScreenFix.com/applet.php?width=1366&height=768 to remove it, but to no avail. I looked at your table of replacemente lcd but it didn't understand because my resolution was not on it. So my question is: how many pixels I must have because I complain?

  Another question, windows 7 permanently "think" my DVD player is a mountable/no mountable option, which means that I can take it apart like a USB pen... no doubt I am lack of pilots... but I don't know which ones that...

  And another little question: How can I increase my sound on this laptop? I'm a little unhappy with the sound quality, my previous laptop (of the older generation) had a better sound quality...

  Thank you for you time :=)

  Hello

  > So my question is: how many pixels I must have because I complain?

  More than that, you can read under
  http://APS2.toshiba-tro.de/KB0/TSB9502LZ0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  To determine the number of pixels, you can use a program like, dead pixel tester.

  > Another question, windows 7 permanently "think" that my DVD drive is a mountable/no mountable option

  Perhaps, you must delete the upper/lower filters:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  > And another small question: How can I increase my sound on this laptop?

  If the sound at high volume settings and it is still not enough, there is nothing to do. of course, you can install the most powerful speakers or use external one. You should try to update a sound card driver, I doubt, however, it helps you to:

  [European Toshiba driver page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• How can I increase the sound from a clip in LP Pro?

  10.10.5 MBPro

  I made a video of my iPhone. The soundtrack is ok, but it must be stronger. I know how to import a movie in logic. Once that sound appears, how to increase the sound? You can do this in iMovie, but I would like to use logic. Any help very welcome.

  Click on the audio track that you want to be stronger

  The bracket should appear

  Here, you can increase the volume

• How to increase the sound on my new pavilion g6 everything is up all the way, but not very load

  How to increase the sound on my new laptop of g6 pavilian everything is in place but not very load

  Hello

  One thing that can help is a bit what follows.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• How can I increase my sound using Audio Mixer?

  I needed to increase the volume of a clip that I had in my project of Premiere Elements.  Somehow, I managed to do it.  When I play, open the video with the Audio Mixer Panel, I see how the bar slider at the top to a + 3 which is optimal for the clip that I have.  I have another clip from the same event and I also need to increase the sound to a + 3.  I thought THAT I had chosen the clip and then everything just slid the bar upward.  I made this a few days ago.  Now I am trying to increase the volume on another element by dragging the bar to the top, but it has no effect.  I can edit the beginning and the end of the clip, but I don't think that would have an impact.  I think any change in volume could make a clip ready.  Someone at - it ideas?  Thank you.

  It was perhaps not the best way, but I managed to do work by sliding the bar as the video played.  Seems to me that there should be a way to have the chronological marker at the beginning of the clip, and then move the bar down so when the clip starts, it starts the sound to the lowest position, but I couldn't get this to work.  (For me, it would have been the easy way to do it, but I'm used to Pinnacle on Windows).  I could also select the clip and adjust the gain which also reduces the volume at the beginning of the clip.

• How to increase the sound on my HP laptop

  I have my volume set the setting on my HP Pavilion laptop of series g, but sound must be stronger... is there a way I can increase it?

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Satellite Pro A300D - missing Dolby Sound Room under WXP

  Hello

  I need help.
  I have a Toshiba Satellite Pro A300D - 161 and it had Windows Vista but he crashed and installed Windows XP Professional.
  The problem is that when I got Vista sound was with Dolby Sound Room and it sounded very good.

  But now, it's offal as an old PC... maby you know a kind of drivers that can help to increase the sound of my laptop?

  I assume that you have the correct driver installed and also requires that you install official Toshiba support page.
  You must understand that this laptop is designed for Vista and better performance in any aspect that you'll probably Vista. This laptop model is also supported for WXP but of course the drivers and utilities and additional tools do not offer in so many different settings as a software designed for Vista.
  Have you tried to change the sound quality using equalizer in players you use?

  I have the Satellite A300 - 1LI running WXP and the sound is OK. The key is that the sound is strong. ;)

• Sound quality on Satellite P100-347 - no low, very flat sound

  Hello

  I had a P35-609 and just bought P100-347. I noticed that the sound is worse on the new laptop. It's like the cheapest on the market and not harman/kardon speakers... What's the problem?

  Is it a fault of my unit, or you guys have experienced the same thing?
  I tried all the settings in Windows (XP MCE) and Toshiba applications, I've updated the audio driver, but it just seems like the speakers are really poor... :( Please tell me you have not the same and I'll run to the store to replace the laptop...

  See you soon!
  ptolo

  Hello

  I m not a P100 owner and, therefore, I cannot give you an opinion on the quality of the sound on this laptop. But according to the specifications of the laptop, the speakers are certainly harman/kardon.

  I read a few threads on the problems of sound on the P100 and also found this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB6801JF0000R01.htm

  It s on the sound of crackling on P100. The update of the BIOS and the driver should be done.
  I don't know if it will help increase the sound performance, but you can try this procedure m

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• Audio Realtek mixer of inhibition inadvertently sound for internet explore

  When the user click with the right button on the sound mixer and it opens, there are two columns for IE11. I don't know why are there two columns. They both returned to cut even after you move the slider to increase the sound. I tried to uninstall the driver from Device Manager and let it recharge.  I also tried to run ccleaner. How this can be fixed. I would like that the user don't have sound in their browser and not have to deal with that.

  It is a Windows 7 computer.

  Hello Sidandnancy,

  Thanks for posting your question on the Microsoft Forum.

  The answer to your question, are the two columns of the sound device that is to say a speaker or headphones and the other for the application the sound system needs.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  • The question is specific to movies and songs only online?
  • Did you do last changes made on your computer before this problem?
  • What is the number and model of your computer?
  • Have you tried to update the drivers from the manufacturer's website?

  For now try the methods and check them off below if it can help solve your problem.

  I suggest you run in the resolution of the problems of generation of the below mentioned link and check if it helps.

  Step 1

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Step 2

  If the problem persists I suggest you follow the steps described in the article.

  Tips for solving common audio problems.

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  Get back to us with all your information and result of proposed suggestion and we will be happy to help you further.

  Kind regards.

• [SPA112] No sound when the outgoing call

  I installed my new SPA112 with an EdgeRouter.

  Router config:

  Pass port 5060-5061 to the SPA112

  Before port 16000-17000 to SPA112 (also tried 10000-35000)

  SPA112 Config:

  NAT: EXT IP, Keep Alive (my ISP does not use a STUN server, tried another server STUN, still the same problem)

  Line: Mapping enabled NAT, NAT Keep Alive.

  The SPA112 is registered with the SIP server.

  The problem:

  When I call someone, the person can here me, and I can here the person.

  When someone calls me, I can here the other person but the other person can't here me.

  See the TXT for incoming and outgoing call.

  Incommingcall.txt: Problem with audio to go to the other person

  Outgoingcall.txt: No problem with audio

  When I call someone, the other person hears me and I hear them.

  Of the most important messages for outgoing calls ( incoming , below). Commented by me.

  [0:0]CC:STUN OK:192.168.1.8->83.247.45.219, 5060->5060 16388->16388

  STUN has detected that your external address is 83.247.45.219, the same port numbers by NAT.

  [0]->212.45.38.48:5060(979)INVITE sip:064.....[email protected]/*  */ SIP/2.0Via: SIP/2.0/UDP 192.168.1.8:5060;branch=z9hG4bK-f6bed01From: "3134.....99" [email protected]/*  */>;tag=b66f15e1852bc1c4o0To: [email protected]/*  */>Remote-Party-ID: "3134.....99" [email protected]/*  */>;screen=yes;party=callingCall-ID: [email protected]/*  */CSeq: 101 INVITEContact: "3134.....99" [email protected]/*  */:5060;ref=3134.....99>User-Agent: Cisco/SPA112-1.4.0(001)
  
  o=- 136114 136114 IN IP4 83.247.45.219c=IN IP4 83.247.45.219m=audio 16388 RTP/AVP 8 18 2 0 100 101a=rtpmap:8 PCMA/8000a=ptime:30

  Call setup. Audio stream Incommimg asked to be sent to 83.247.45.219:16338. It is in the transmitted range (16000-17000).

  [0]<<212.45.38.48:5060(817)
  SIP/2.0 183 Session Progress
  Via: SIP/2.0/UDP 192.168.1.8:5060;received=83.247.45.219;branch=z9hG4bK-da26c2e5
  From: "3134.....99" [email protected]/*  */>;tag=b66f15e1852bc1c4o0
  To: [email protected]/*  */>;tag=SDhgdq997-127.0.0.1alUtKGp-09645+1+5c310006+2c2bae2a
  Call-ID: [email protected]/*  */
  CSeq: 102 INVITE
  Server: Alcatel-Lucent 5020 MGC-8 8.1.0.16.SP8.5
  Contact: [email protected]/*  */:5060;transport=udp>
  
  o=- 3656610554 3656610554 IN IP4 212.45.38.48
  c=IN IP4 212.45.38.48
  m=audio 63808 RTP/AVP 8 101
  a=ptime:20
  a=rtpmap:8 PCMA/800

  Of the other answer for call setup. Coming out of the audio stream asked to be sent to 212.45.38.48:63808. He is outgoing don't stream so no special arrangements on recalcitrant NAT. It doesn't look good in the direction of the cabin, is not so surprising that it worked.

  When someone calls me, I can hear the other person but the other person can't hear me.

  
  Most important messages for incomming call (for outgoing see above). Commented by me.
  

  [0]<<212.45.38.48:5060(789)
  INVITE sip:3134.....[email protected]/*  */:5060 SIP/2.0
  Via: SIP/2.0/UDP 212.45.38.48:5060;branch=z9hG4bK8jld5h207grg5v4up6m0.1
  From: [email protected]/*  */:5060;user=phone>;tag=SDgcm0c03--45026-3668cfa-2d96f01c-3668cfa
  To: [email protected]/*  */:5060;user=phone>
  Call-ID: [email protected]/*  */
  CSeq: 1 INVITE
  Contact: [email protected]/*  */:5060;transport=udp>
  
  o=HuaweiSoftx3000 1115218122 1115218123 IN IP4 212.45.38.48
  c=IN IP4 212.45.38.48
  m=audio 63316 RTP/AVP 8 101
  a=rtpmap:8 PCMA/8000
  a=ptime:20
  

  Configuration of incoming call. Coming out of the audio stream asked to be sent to 212.45.38.48:63316. He is outgoing don't stream so no special arrangements on recalcitrant NAT.

  [0]->212.45.38.48:5060(918)
  SIP/2.0 200 OK
  To: [email protected]/*  */:5060;user=phone>;tag=430df31719850825i0
  From: [email protected]/*  */:5060;user=phone>;tag=SDgcm0c03--45026-3668cfa-2d96f01c-3668cfa
  Call-ID: [email protected]/*  */
  CSeq: 1 INVITE
  Via: SIP/2.0/UDP 212.45.38.48:5060;branch=z9hG4bK8jld5h207grg5v4up6m0.1
  Contact: "3134.....99" [email protected]/*  */:5060>
  Server: Cisco/SPA112-1.4.0(001)
  Remote-Party-ID: "3134.....99" [email protected]/*  */>;screen=yes;party=called
  
  o=- 165329 165329 IN IP4 83.247.45.219
  c=IN IP4 83.247.45.219
  m=audio 16392 RTP/AVP 8 100 101
  a=rtpmap:8 PCMA/8000
  a=ptime:30
  a=sendrecv
  

  Our response to the incoming call configuration. Audio stream Incommimg asked to be sent to 83.247.45.219:16392. It is in the transmitted range (16000-17000). It seems not good in the direction of the cabin. According to statistics BYE...

  P-RTP-Stat: PS=990,OS=166160,PR=594,OR=142560,PL=0,JI=0,LA=0,DU=17,EN=G711a,DE=G711a

  ... SPA112 sent 166160 B/990 packets of audio data at the other end. I see no outgoing audio problems. Call person to hear. Well, despite the packages are OK at the time, they may not be the same at the receiving end. You have active SIP ALG feature on EdgeRouter? SIP - LG is known for having questions about so many routers, which one of the Uniquity. In addition, you should not combine STUN on SPA112 with SIP - ALG on router. Please turn off ALG SIP on the router. If it does not solve your problem, then ask provider upstream assistance. We need SIP & RTP packets captured on the side of the trunk. A note unrelated to your problem. It seems that you SIP-> settings-> value 0.030 RTP toRTP packet size . It's a suboptimal value for your upstream provider (in fact it is bad everywhere in Europe). Your provider uses 0.020 (according to the settings specified in the INVITATION). Consider the same value. It can increase the sound quality (for the end-user of the other).

  This message contains information related to the site of the other so it may contain information considered to be sensitive or confidential.

  Consider the notation of the useful comments. It can help others find solutions.

• Increase an extract audio scrubber?

  Hello everyone.  I was wondering if it is possible to increase the sound overview scouring?  To explain, when I hold CTRL and the left mouse button down on the mark of time WITHOUT dragging the audio will preview the first second or so of the audio loop.  I would like to increase so it presents in preview the first 3 or 4 seconds on a loop.  Is this possible?

  You can simply press on the. key on your keyboard to launch an audio loop overview. You can adjust the length of this loop in the preferences.

• Choose a bluetooth for mac and iphone speaker

  I want a bluetooth speaker (low price) that will allow me to:

  1. listening music classic on iTunes and, ideally, iPlayer Radio for catch-up programs (iPhone)

  2. listen to Internet radio stations and podcasts (iPhone)

  3. an increase in sound for watching movies (Mac Airbook).  I have a big Apple monitor in my study, but when the grandchildren come, watching movies on my airbook or ipad in the living room, they need more of her.

  Portability isn't a problem because it is for use around the House, and I'm not interested by using outside.

  I don't really understand on the technology bluetooth, but just enough to know that I have to be careful to buy a speaker that can perform these functions (who already have speakers of Sonos, which cannot be used for movies). I have the impression that the software is as important as sound quality?

  I've been looking online (I live in the country, far from any shops) to the Bose Mini II, Audio Pro Addon T3 and also wonder about Sony andHarmon Kardon.

  Any help would be appreciated.

  Hey there, Frances,.

  I see you're in the market for a Bluetooth wireless speaker to work not only with your iOS devices, but also your Mac.  Some Bluetooth speakers offer this feature, as the pill beats +:

  Bat pill 2 GB - Black

  You can also take a look at all Bluetooth speakers available in the Apple Store online by clicking on the link below.  Be sure to check the product information and clients to ensure that the product meets your needs.

  Speakers - Audio & music - all accessories - Apple

  Take care.

• Your comments coming from speakers, when I have my headphones plugged

  Hello

  I have a problem with my laptop Satellite Pro, Windows Vista computer, when I plug in my headphones and increase the sound of the laptop, this feedback is coming through the speakers on the laptop.

  How can I stop this?

  Thank you

  Andy

  > When I plug my headphones and increase the sound of the laptop, this feedback is coming through the speakers

  Do you mean just the feedback (echo) or a full sound?
  What Satellite Pro you have exactly and what system do you use?

  You have a Realtek sound card?