An iPhone 4S should upgrade to the latest iOS version 9?

Similar Questions

• What happens if I restore and configure my iphone like new without having the latest iOS installed on the device?

  I intend to restore my phone. Currently installed 8.3 iOS and iOS 9.1 is available to me. But I don't want to upgrade to iOS 9. It will ask to update iOS 9 after restoring? Help, please

  He won't ask. It will just upgrade to the current version of the iOS when you do a restore via iTunes.

• I still have the iPhone 4S.  What is the best IOS version for my iPhone?

  I want to reuse my iPhone 4S.

  What is the best IOS for 4S?

  Where can I find and how to install in my 4S?

  There are only two things you can do for your iPhone 4 s. using the current iOS located on the unit, or 9.3.3 the current iOS iOS. You can not 'find' or 'install' all other versions of iOS.

• What is the latest IOS version supported WS-SVC-FWM-1?

  Dear all,

  Is it possible to set up final IOS 4.1. series with ASDM in the WS-SVC-FWM-1 firewall module?

  Please suggest on the last support for IOS version on the WS-SVC-FWM-1 firewall.

  Thanks in advance,

  Selva.

  Hi Selva,

  FWSM uses a different operating system (not IOS) and the latest version is 4.1 (15). You can go to the following URL

  http://software.Cisco.com/download/release.html?mdfid=277413409&softwareid=280775068&release=4.1%2811%29

  Choose 4.1 (15) and download it from here.

  Latest version ASDM is 6.2 (3). You can download here:

  http://software.Cisco.com/download/release.html?mdfid=277413409&softwareid=280775067&release=6.2%283%29F&relind=available&rellifecycle=&RelType=latest

  Thank you!

  Gerard

• I last Safari and OSX on my computer but Adobe says that it does not support my system and I should upgrade to the latest version. But I already have this installed.

  Try to get a trial of CC photoshop but Adobe say I need to update Safari.I am running Safari 9.0.1. It can't get more recent. I'm on OSX El Capitan 10.11.3 but it still won't let me download a trial version.

  You can try to reset your browser, and try to install Adobe Creative Cloud and share the results.

• Upgrade to the latest version of Firefox, but the user agent remained at 3.6.

  Mint Isadora 64-bit. Finally, I upgraded to the latest stable version 3.6 in the Launchpad repo. I can't install any addons now because addons.mozilla.com said I use 3.6. Troubleshooting information, it seems that my user agent still said 3.6. Subject: firefox said I use 6.0.1. How can I fix the user agent?

  https://support.Mozilla.com/en-us/KB/websites+or+add-ons+incorrectly+report+incompatible+browser

• should I remove imovie9 before upgrading to the latest version

  I need to upgrade to the latest version of iMovie as 9 does not respond with El Capitan.

  I completely remove 9B before doing this?

  Hello

  No, you don't need to delete iM9 before moving on to iMovie 10.1.2 (latest version).   Both versions may remain on your computer.   iM10.1.2 allows you to update your projects iM9 and events so that they will play on the new version.   So that's why you would leave iM9 on your computer, so that you can make the update.

  Best,

  Rich

• Should I upgrade to the latest Mac OS?

  So, here are the statistics of my iMac:

  21.5 inch, mid-2011

  Processor 2.8 GHz Intel Core i7

  Memory 8 GB 1333 MHz DDR3

  Graphics  AMD Radeon HD 6770 M 512 MB

  The last iMac I ran very slow when I updated the operating system most recent (well, he started slowly going at exactly the same time, I did) so I was a little reluctant to upgrade to the latest version. I can't find any particular final answer, so if someone could help me with a Yes or no, that would be great. Thank you.

  Your Mac is fully compatible with OS X El Capitan, so it's possible and even recommended that you update.

  However, if you are comfortable with what you have now and if you do want to use the new features introduced in El Cap, well, you can skip this version.

  Below you will find the General presentation of the OS X ElCapitan.

  http://www.Apple.com/OSX/whats-new/

• I have Firefox installed 42.0 and works correctly. Yahoo on Firefox indicates this, but Yahoo on Chrome keeps asking me to upgrade to the latest Firefox

  I use mainly Firefox and Chrome only as an emergency backup. I still have backup third IE and Yahoo by default, thus opening 'IE' takes me directly to Yahoo.com. In Chrome and this 'fake IE', Yahoo says to upgrade to the latest Firefox. I even updated a second time to 42.0 Firefox but Chrome and 'fake IE' Yahoo wants the latest update me of Firefox. In Firefox, there is none that question. If so, can or should be done?

  airider said

  And I don't know how Firefox/Yahoo and non Yahoo/Chrome or IE/Auto-Yahoo acknowledges what version I am running.

  Browsers generally identify themselves to Web sites. If you want to see what your browsers send, you can use my test page - the "user agent" string is displayed in red:

  https://jeffersonscher.com/RES/jstest.php

  It is a little confusing: browsers may raise on behalf of other browsers to inform Web sites that they can deal with the pages designed for other browsers.

  But browsers do not send a list of ALL of your software on your computer - thank God - so if you visit a site with chrome, it cannot know which version of Firefox, you have, or even if you have Firefox at all.

  There is an exception to this absolute statement, called Flash Local Storage Objects, sometimes called super-cookies. If you visit a site in the browser F and allow the site to use Flash and store data on your computer, then when you visit the same site in the browser to C, if you allow the site to use the Flash, it can read these data and know that you have already visited and connect your two browsers.

• Thunderbird 24.3.0.5144 crashes whenever I try to open it. How can I fix or should I download the latest version?

  I click on the shortcut to Thunderbird and Windows tells me immediately that the program has stopped working. He then tells me that "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. Is there a solution for this? If this is not the case, should I download the latest version of Thunderbird? The new version will automatically find my settings? Obviously I can't automatically upgrade if the program closes before I open it!

  Yes, install the latest and see how it goes.

• iPhone 6 more issues activation and network on the latest iOS 9.3.2

  I have an iPhone 6 it is having problems with Activation and networking connectivity. I activated via iTunes and updated to the latest iOS 9.3.2 this morning. The phone remain active for a period of time and then come back to need activation.

  Using WiFi it is full bars but no connection. I'm typing this from my iPad on the same WiFi connection, so not the network. If I turn off WiFi and cell there still no connection. The phone will receive calls (even when stuck in the activation state) and can make calls after you have enabled from iTunes.  She was released a couple of times, but always the same question.

  I tried to erase and reload from iTunes to the top, but the restore function requires that find my iPhone service shut down on the phone and this step requires access to complete network.

  Try the following steps:

  • Try connecting your device to your computer and launch iTunes. Choose your device and click on summary > update.
  • If this does not work, make sure you have the latest version of iTunes installed on your computer and restart your computer.
  • When it restarts load iTunes and try to select your device and click on summary > update again.
  • If this does not work, it's time to try a restore. Press and hold the sleep/wake and home buttons on your iPad or your iPhone until iTunes gives you the option to restore your device.
  • When it's over, you can restore a backup, and you should be good to go with 9.3 running iOS.

• I have to upgrade to the latest version of Firefox?

  Do I lot to the latest version of Firefox? I get a message that says that the version I use is not secure. See the troubleshooting information. I already asked this question, but got this message: thank you! Your question will appear on the site as soon as you confirm your email address. You should receive an email shortly with a link to confirm. This is the link I was taken in. Thanks for your help!

  Yes, you really need to upgrade to the latest version if you want safety last corrections to be applied. Now, more secure versions (supported by Mozilla) are 6.0.2 and 3.6.22.

  If you use 4.0, 4.0.1 5.0 or 5.0.1 you should immediately upgrade to 6 (recommended) or downgrade to 3.6.22. These versions have security problems and is more supported by the Mozilla security patches. People who use these versions are open to attacks.

  If this helped you, hit "resolved."

• HP Support Assistant: older version give problems, how to upgrade to the latest version?

  Hello world

  My computer is a HP Pavilion laptop running Windows 7 Home Premium 64-bit. I have problems with one of the HP software programs pre-installed - HP Support Assistant. It appears once a week (it works for a while after Windows has loaded and then appears a screen) and I opened Assistant support and attempted to change his schedule, but he simply refuses to save the changes I have made to its settings. I noticed that the version number is 4.2.5.3. The program when searching for updates (manually triggered), cannot access HP servers, but fails to download updates, cannot gather information can not analyze the system and tells me that my computer has all the updates (which, given the number of HP Support Assistant version) ", is obviously not correct). So I ran HP Update (version is 5.001.000.014), but it says that I have the updates.

  Finally, via msconfig, I searched for HP Support Assistant, but he wasn't anywhere. However, while it was in operation (which slowed down the computer), I saw it listed in the Task Scheduler (under applications, I think).

  I did some reading, and it seems that the latest version of HP Support Assistant is version 5. How can I upgrade to the latest version? Other preinstalled software of HP update and HP Support Assistant that came with the laptop includes:

  Center of HP solutions-

  -HP Advisor

  -HP MediaSmart

  -HP Photosmart Essential 3.5

  -HP Smart Web Printing

  -the printer drivers and software for my HP all-in-one printer

  I disabled the following HP services as they could slow down the process of starting Windows:

  -HP Health Check (disabled via services.msc)

  -HP Digital Monitor (I think that it has been installed with the printer software. Disabled via msconfig)

  Can someone help me please? Thanks in advance for your time.-)

  Hello

  Most HP installers contain several languages and you should be able to choose German during the first part of the installation.

  I recommend you to uninstall your current version first by using programs and features.  When it is uninstalled, it is often a good idea to restart the laptop before proceeding with the installation of the latest version.

  All the best,

  DP - K

• TANDBERG CODEC upgrade to the latest version 3000MXP path

  Hello

  The company that I work has a version of the TANDBERG CODEC 3000MXP runing software

  F5.0 PAL

  I know that this unit is old, but I was wondering if it would be possible to upgrade to the latest version F9.31. And if yes what is the upgrade path.

  See you soon

  Hi Alvaro,

  As Jens has mentioned, you should be able to go directly from F5--> F9, but the recommended way would be worth the extra step to make sure.  (I was expecting to see a F8 step in there, because there was an update of the firmware of camera in F8).

  If you have a service contract on your device, you should have access to all the keys to unlocking via the Licensing Portal, so, again, do an additional step should not be too much a problem.

  If you do not have a service contract, you may be interested by this safety notice , which should help you up to version 9.  If you go this route, you should also ask the TAC request for unblocking F7 key so that you can make the gradual upgrade (or you go directly with the 5-> 9 if they don't give it to you).

  PS: Here is the thread with the recommended upgrade path: https://supportforums.cisco.com/thread/2110507

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I'm not really clear on the intent of your question.  If you can get the latest version you want to buy it.  When you go to buy, you should be able to see if it has an option to buy an update of the version you currently have.  I can't find the purchase page to check it out myself... I can only find the subscription option.