An update of security will not be install__

Similar Questions

• This update that kb2729450 will not be installed on my machine.

  This update that kb2729450 will not be installed on my machine. I am running Windows XP SP3. .NET framework 1.1 of .NET Framework 2.0 SP2 .NET Framework 3.0 SP2 and .NET Framework 3.5 SP1 are also responsible... Why the many versions?

  The yellow security shield appears in the status bar. I click on the shield and the Update window opens. I select the "quick installation" and the installation of the update begins. After a few minutes, the message 'Done '. Here's where she spreads all other "Updates" I ran this machine. In the "Done" window, there is only an option button "close"... No button "restart the computer". I click on the "Close" button, the window collapses and the yellow shield disappears... for about 5 minutes, when he reappears! I check the 'Add Remove Programs' in Control Panel, and I don't see that kb2729450 listed. I've "installed" 5 - 6 times, always with the same result. I was struck with this ransomware FBI 4-5 months ago and it was professionally removed. Since I was very nervous when this machine burps.  Also, since the Microsoft Community page, I ran Kaspersky anti-rootkit.  He has reported no problems with this machine

  Nope, different from the machine, although I think I solved it.  I "restored" to a point three weeks ago.  After that 'Restore' finished, I have rebooted and within minutes the yellow shield pops up... I installed every 5 or 6 that this KB.  After installation, he went through his screen to normal closing with the radio button 'restart now '.  After the reboot, I checked the area add / remove in the control panel and Voila.  They and KB2729450 are all here.  The machine seems to work very well and also faster than its ever been.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• problem updating SP3 after a reboot at the end of the update process, IE8 will not start

  I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

  Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.

• Since the last update Photoshop CC will not use my GPU while Lightroom CC works. East of GPU Radeon HD 5700

  Since a recent update Photoshop CC will not use my GPU saying I do not have a minimum of 512 MB of vRam and wont let me enable it, even if I have 1 GB of vRam...

  When I load CC in Lightroom, it detects, is already selected for use.

  I use Windows 10 with 8 GB of ram and a Radeon HD 5700

  any ideas on how to fix.

  Go to the web site AND and download the most recent Wibdows 10 device driver for your graphics card.  It looks like you have installed is not correct.  No date shows no VRAM.

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. IsIntegratedGLGPU = 0

  glgpu [0]. GLMemoryMB = 0<>

  glgpu [0]. GLName ="? »<>

  glgpu [0]. GLVendor = "ATI Technologies Inc."

  glgpu [0]. GLVendorID = 0

  glgpu [0]. GLDriverVersion ="? »<>

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "AMD Radeon HD 5700 Series.

  glgpu [0]. GLRendererID = 0

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver ="? »<>

  glgpu [0]. GLDriverDate ="? »<>

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• Update for Windows XP (KB2509553) security will not install starts but will not end

  Update for Windows XP (KB2509553) security is not installed

  Hi RogerGreene,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?
  4. You receive an error message when you try to install the update?

  Method 1

  I suggest that you manually download and install the update, check if it installs properly.

  Update security for Windows XP (KB2509553)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

  Method 2

  If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• I am trying to run windows update, but it will not work.

  I tried everything but windows update will not work. I used scanner security microsoft onecenter and you run virus and spyware scans and defragged my computer and fixed it all. However when I try to run windows update I have a problem that says: Windows Installer of Module: WindowsWcpOtherFailure3. I tried everything and I'm running out of ideas!

  See if the following can help:

  1. how to reset Windows Update Componeants
  http://support.Microsoft.com/kb/971058

  2. system analysis tool:
  http://support.Microsoft.com/kb/947821

  3. how to solve problems
  http://support.Microsoft.com/kb/2438651/en-us

  4.

  Support for Microsoft Update technical problems - troubleshooting

  http://support.Microsoft.com/ph/6527#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Updated Windows Update, IE 8 will not open

  I installed windows updates, now IE 8 will not be open.  Diagnostic says nothing wrong with internet connection.  I lived all the steps to solve this problem shown on the Microsoft Web site.  Of the restore on computer to connect to this post.  Certainly, there is a fix available.  Can someone help me?
  Thank you!!

  Hello

  Could you please answer these money questions?

  (a) tell us the edition of the Windows operating system that is installed on your computer?

  (b) what exactly happens when you try to start Internet Explorer after update updates?

  I suggest you to run the troubleshooter internet explore.

  Windows provides a built-in utility that can automatically find and fix some problems with Internet Explorer.

  Open the troubleshooting Internet Explorer Performance Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Internet Explorer Performance.

  For more information, visit the below links:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Internet-Explorer-performance-Troubleshooter
   
  If the method above has not fixed the problem and you have tried all possible methods to resolve the problem without success I suggest trying to perform an optimization of Internet Explorer on your computer and check for the issue.
   
  How to optimize Internet Explorer
   
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows Update - Outlook Express will not download new email after the last update

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is possibly corrupted and use Scandisk to repair. This has happened on my computer and my wife using the same basic configuration. Could not resolve the problem before doing a system restore to a previous Restore Point before the update of Windows. So my Windows Updater is no longer needed.

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is maybe damaged...

  Display error message (verbatim) complete (e.g., default mail client is not properly installed).

  If you use Outlook Express as the default mail Client, why same Outlook there?

  Microsoft Outlook 2003 updates [for example, KB977840] change default mail manager in Microsoft Outlook
  http://www.oehelp.com/OETips.aspx#13
  Related: http://support.microsoft.com/kb/933450 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you load an update, my reboot will not work. Again the sleep & Shutdown work. All other features still work.

  To run Windows XP.  I can't finish an update because the restart function will not work (be it at the end of the installation of the update) or the Start button

  Hi Beaver6,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. What happens when you try to restart the computer? You receive an error message?
  4. You have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the above step failure may refer to the article and try the steps mentioned, check if it helps.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

• After updating, my Safari will not open.

  I have a mac mini end of 2012. 10.10.5

  It was fine this morning, then I updated and now my Safari will not open. I'm using Google Chrome now. What could be happening and how to fix it?

  Thank you.

  Try installing the combo update

  Download update of OS X Yosemite 10.10.5 Combo

• The update of Firefox will not now work update 2-3 days ago.

  Set Firefox to update if there is 2-4 days and since that time arrives, but won't do anything. He knows the previous sites on the drop-down list but will not load anything on the web. The top bar shows the following:http://en-gb.start3.mozilla.com/firefox?client=firefox-a & rls = org.mozilla: en - GB:official

  One possible cause is a firewall is not blocking the new version of Firefox, for more details, see Firefox cannot load websites, but can other browsers.

• After update ios9.2 will not send my videos by email

  After updating my iphone 6 to iOS9.2 my videos will not send an e-mail. When I take a video with my phone and I select to send it by e-mail, used to compress or something, that you would see the blue progress bar and the video I sent yesterday was 5MB. Now when I try the SAME video, it does not compress and tells me that the video is too large to send by e-mail (80MB). How do fix us this?

  I updated yesterday to 9.2, took a video this morning and discovered the same problem.   I checked my camera settings: 1080 p at 30 frames per second, so not super high resolution.  I haven't looked before, but the photo app camera has always applied compression so that videos can be emailed.  I can send the second 49 video via the Message application, but it weighs 99MB when I try to send an e-mail.  Videos used for compressed up to something like 3 or 4 MB when I chose to send as e-mail.

  It would be useful to know whether it is a bug (feature film) for everyone or if he is given to a few of us.

• by turning on the computer a help and support update runs, but will not be finished

  I start my computer and help and support update starts but usually ends it starts before im connected to my wireless and I'm going to the task management to stop the task if I can get online and connect, when I try to update, it is said there is no update needed.what can do to stop this Thank you

  Go to start / search box and type msconfig and enter and then double-click on the program icon that appears.  Go to the Startup tab and see if you can find that help and support update program which are listed there.  If so, uncheck the box next to it, so it will not load at startup, click OK, and exit.  Then reboot and see if that solves the problem (but you won't update whenever it came from).  If this does not work, go to start / Control Panel / Administrative tasks / Task scheduler and see if the help and support update is listed here - if so, delete it and will try it is no longer to load at startup (but you have lost the update whenever it came of).

  If this does not work, please transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads people who specialize in Windows Update issues (and I guess it's an update of Windows we're talking - you were not accurate in your message) will be more than happy to help you with your problem.  If you have the update name and KB number, it would help and you should include it in your message there.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.