Similar Questions

• Noisy fan UCS 6248 fabric Interconnect noise RPM

  Hello

  Our pair of interconnection fabric installed 6248 produce a FAN noise.

  Is it possible to reduce their RPM? So can be more silent? The server room have good air conditioning.

  Some newspapers like below:

  Fabric - Has (nxos) # show the fan environment details

  Fan:
  ---------------------------------------------------
  Module fan air Speed (%)  Speed
  Direction
  ---------------------------------------------------
  1 1 front-to-Back 60 15428
  1 front-to-Back 2 60 11065
  1 front-to-Back 3 60 14835
  1 front-to-Back 4 60 10997
  2 1 front-to-Back 60-15000
  2 front-to-Back 2 60 11134
  2 3 front-to-Back 14835 60
  2 front-to-Back 4 60 11065

  Power supply:
  -----------------------------------
  Configured module air flow
  Direction speed (%)
  -----------------------------------
  Front-to-1 Back 60
  2 front-to-Back 60
  Fabric-A (nxos) #.

  Fabric-A (nxos) #.
  Fabric - A (nxos) # show environment

  Fan:
  ------------------------------------------------------
  Fan model Hw status
  ------------------------------------------------------
  Chassis-1 UCS-FAN-6248UP - ok
  Chassis-2 UCS-FAN-6248UP - ok
  PS - 1 UCS-PSU-6248UP-AC - ok
  PS - 2 UCS-PSU-6248UP-AC - ok

  Temperature
  -----------------------------------------------------------------
  MajorThresh MinorThres CurTemp sensor module status
  (Celsius)     (Celsius)    (Celsius)
  -----------------------------------------------------------------
  1 ok taken 67 58 35

  Power supply:
  Voltage: 12 Volts
  -----------------------------------------------------------
  PS model power input power state
  Type (Watts) (Amp)
  -----------------------------------------------------------
  UCS-PSU-6248UP-AC AC 780,00 65.00 1 ok
  2 UCS-PSU-6248UP-AC AC 780,00 65.00 ok

  Model power power power power status mod
  Asked asked allocated allocated
  (Watts)   (Amp)       (Watts)   (Amp)
  --- ----------------------  -------   ----------  --------- ----------  ----------
  UCS-FI-6248UP-SUP 492,00 41,00 41,00 492,00 1 power
  UCS-FI-DL2 24.00 3 2.00 24.00 2.00 under tension

  Summary of the use of power:
  --------------------
  Power supply redundancy mode: redundant
  Operational mode of power supply redundancy: redundant

  Total power 1560.00 W

  Reserved for directors of research 492,00 W of power
  Power currently used by Modules 24.00 W

  -------------
  Available power 1044.00 total W
  -------------
  Fabric-A (nxos) #.

  Felipe,

  Please open a TAC case to see if the problem is in the hardware level (a show of UCSM tech will be necessary) an engineering failure analysis may be needed to determine what is happening.

  -Kenny

• Phot of problem analysis

  Hello

  I have a problem with the app photo with Sierra.

  I 107755 pictures. the analysis of people started

  but he remains arrested with 519 photos

  I tried to fix the bookstore. restart analysis but still stuck to 519 phoos.

  Does anyone have the same problem and a solution?

  Thank you

  Thomas

  How long it has been blocked? You have a very large library so I keep the Mac awake and fed and the Photos doesn't work does not and give him a few days - usually messing slows it rather than speeding it and is a 'restart Yvert"command

  lN

• I can't save analyses after you download Sierra OAS

  I can't save analyses after you download Sierra OAS.

  The "Save" button is grayed out?

  Hello 2014anthony1,

  Thank you for using communities of Apple Support.

  I see that you can not save scans after updating to Mac OS Sierra. I would make sure I can save analysis too, I do a lot of scanning on my Mac. Let's work together and get this problem is resolved.

  I suggest to use macOS Sierra: update or change the printer software, more precisely, that these sections:
  
  

  Most printers are compatible with Mac OS. When you add a printer, Mac OS automatically uses AirPrint to connect to the printer or the printer software downloads (also called a printer driver).

  If you can not use a printer that is already added, or you see not the options you want in the print dialog box, you can add the printer again with different or software to print settings different.

  Add your printer with different parameters

  1. Choose the Apple menu > System Preferences, and then click Printers and scanners.

  2. Select your printer from the list, and then click the button Delete .

  3. Click on the button Add and if a context menu appears, choose Add a printer or a Scanner.

     A dialog box is displayed that lists all Hello, IP, printers directory shared, and open on your local network. It may take a minute or two for your printer to appear.

  4. Select your printer, when it appears in the list, and then do one of the following:

     • Use AirPrint: Click on the drop down menu, then choose AirPrint (or Secure AirPrint). If AirPrint is not on the shortcut menu, the printer does not support it.

     • Use a printer software installed on your Mac or downloaded from Apple: Click on the drop down menu, then choose Select software.

     • The software to print a file on your Mac: Click on the dropdown menu, then select other. Select the file, and then click Add.

  Update your printing software

  If your printer is not how to use AirPrint, you can use Software Update to download the latest version of the software. If you don't do this, you see a message that software is not available when you connect your printer.

  • Choose the Apple menu > App Store, and then click updates.

    Install the software updates that are listed for your printer.

  • If the software for your printer is not available using the software update, you can contact the manufacturer for more information. Maybe it's that your printer is not compatible with Mac OS. To check, see the article Apple Support printer and scanner software available for download.

  If you install the printing software you don't have Apple, printing software can not be updated automatically when you use the software update.

  Let us know if that helps. We'll help you get through this.

  All the best!

• BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  < email published by host >

  Safari > Preferences > Security > Web content:

  Uncheck "block pop-up windows".

  

• iOS 10 bed - sleep analysis does not

  I use the new feature in iOS 10. The first night, he showed me a graphic analysis of sleep. But every other night, the alarm sleep wake up properly but there is no data from the analysis of sleep. The days are just empty.

  I did disable the feature or did something else to change the settings. It is simply not show me how long I slept.

  It is a disappointment - I was really looking forward to this feature. Anyone else having this problem, or am I missing something?

  I wonder also how works the time of sunset. How she not analysis sleep? With the right movement? Should it be on my bed, or can it be on my bedside table? How this compares to an application like sleep work? I use for several months now, and it looks even better that bed IOS. Sleep wake me according to my cycle light sleeper, or only at the time, I put?

• My MacBook 12 regularly gets an analysis of needs of Unix executable file names in her basket

  My MacBook 12 regularly gets a Unix executable file named 'needsanalysis' in his trash. Anyone have any idea why? What is it? What can I do to stop what is happening?

  I have two laptops on a an environment MBA 2011 and a 2016 MB and it happens on the latter. Both are on OSX 10.11.6

  Thank you, Colin.

  The executable "unix" just means that it doesn't have an extension for the operating system is not what it is. In addition, the executable bits are defined, so it may have been a case, but this info was lost, too.

  Do you run all software anti-virus on them? I don't know what else would generate something that "needs analysis".

• graphical analysis

  How to do a graphic logo

  analysis of right to left on the screen in 10.2.3?

  Animation of an object is done by applying keyframes for the parameter to be modified. In your case, you want to set two keyframes for the coordinate x: one at the beginning of your clip, with the object on the left side of the screen and the other to the ned of the clip with your object on the right side of the screen. Open the * system for FCPX and look for the video Animation. If you have no experience in animation control, the notions of keyframes and accelerations and trajectories can be quite confusing.

  Presentation of video animation

  With Final Cut Pro, you can create simple changes to the video over time, such as discoloration of the video of the invisible to the visible at the beginning of a movie. Or you can make sophisticated and precise settings over time, many individual parameters of effects video, transitions, trajectories and so on.

  In Final Cut Pro, you use keys and handles images in Video Animation Editor to edit the effects in time of fade.

  The key Word is the traditional workflow in the animation industry, where only important (key) frames of an animation sequence learned to sketch the movement of a character over time. Once the key frames were determined, an in-between artist drew all the frames between keyframes.

  With Final Cut Pro, you can set parameters to specific values to specific times (represented by keyframes) and Final Cut Pro acts as an automatic in-between artist and in time real, calculating all values between your keyframes. For example, to animate a parameter, such as rotation or balance settings, you must create at least two keyframes in the clip. Final Cut Pro of figures on the value of the parameter between keyframes, creating a movement smooth as the setting changes.

• Thunderbird no longer win 10 when I used Windows Defender instead of AVG (if Thunderbird not dangerously ruled Defender analyses) - what is the solution?

  Thunderbird has stopped working win 10 when I used Windows Defender instead of AVG - free

  The event log to win 10 had many "ERROR!" Application Hang. "entries, all this said:
  The version of the program 38.3.0.5749 thunderbird.exe ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the pants of control of security and maintenance
  Process ID: 1acc
  Start time: 01 d102e33137ce7e
  Log name: Application
  Source: Application Hang connected: 10/10/2015 00:45:36
  Event ID: 1002 task category: (101)
  Level: Error keywords: Classic
  User: N/a computer VidAce
  OpCode:

  Things returned to normal when I excluded thunderbird. EXE from analysis of sdefender of window operations. But it's dangerous for security. How to fix this please?
  Thank you.

  Thunderbird is compatible with Windows 10. Defender problems are exactly that. Something that Microsoft needs to fix.

  Regarding a malicious attachments go. What of them?

  Before they can do any harm, they must be transformed into a binary file in the text, they are converted to attach them to the message and then be written in the Temp folder so they can be passed to the operating system with an application for opening of their. An antivirus program that cannot detect the payload of a newly written file and keep it opens is not worth the CPU cycles which is uses for to fail in its primary function. Defender claims to do this. If it isn't, still an issue for Microsoft. Now Thunderbird...

• Thunderbird prevents mail from yahoo to email content analysis?

  Mail Yahoo and g-mail scan the subscribers email content and the content of emails sent to subscribers. I think that it is a violation of privacy, I can't live with that. Thunderbird prevent Yahoo from the analysis of the content of the emails?

  Is thunderbird software to access the e-mail but not email? Please explain if one needs an another e-mail or not, just thunderbird.
  Thank you
  C. Chronis

  Thunderbird is the e-mail client software and not a supplier. It allows you to connect to your server from suppliers and manage your emails. It does not prevent your provider to do anything.

• I can't print the Belarc PC analysis

  I installed the Belarc program on my PC (Lenovo C540) operating system is Windows 8
  The Belarc program scanned my PC and the result appears on the screen it looks like a symbol of Firefox that appears in the upper left corner
  However, when I try to print (Hp Printer photosmasrt 5510) analysis a pop-up window States Firefox does not.
  I can print text and images, so the problem is not with the printer.

  Please notify
  Thank you

  Hi DrJacques,

  Thanks for posting your question on the support forum for Mozilla. I'm sorry to hear that there is a problem with printing while Firefox does not.

  Forgive me if I do not understand the Belaric software, but it seems that it is within this program that you see this error. This also happens when you print directly from Firefox?
  For example: file > print...
  Is there a Firefox does not pop up? Please check the printer to reset preferences in the knowledge base article below:
  Correction of the printing problems in Firefox

• Stabilization repeat dominant analysis of movement several times

  I'm running 10.2.3 10.11.5 OS FCPX.

  I have a project of seven minutes and trying to do a clip that is a minute and a half of stabilization.  The "Dominant movement analysis" of this little clip repeats again and again and again.  It is 100% and seems so all over again.  After a few hours of this, I gave up.

  I made auto disabled.  However, even after running manually all made, the orange line continues to display above the clip and don't change after successive executions of dominant analysis of movement.

  I am not very well informed about the stabilization, but I read that dominant analysis of movement is only meant to work once.

  

  I don't use stabilization often (I slog along a tripod). This might work, however; It's a workflow rest of yore: bring your clip in its own separate project. Cut the clip to just the part you want to use more than one second of handles. To stabilize. Share the project as a master file, it will cook in the stabilization. Import the movie as a steady clip.

• On old laptop, I got a type of analysis with RSS feeds toolbar. Now have 18.0.2 and do not get to see what is later, all the time. How can I get RSS analysis?

  Is available or not for RSS bar analysis? He was a favorite of mine feature to stay connected without having to open a site on news or click on anything other than the title that interested me. If the analysis is no longer available, is there a page in order to get similar things to the old RSS feeds? Can it be done through FaceBook?

  The only RSS feature in Firefox's live bookmarks.

  • Live Bookmarks - subscribe to a web page for news and updates

  For a news ticker, you've probably used an add-on like HeadlinesTicker.

  • https://addons.Mozilla.org/firefox/addon/HeadlinesTicker/

  As far as I know, this is the only news ticker Add on available (another one, NewsBar seems to be obsolete and non-functional in the latest version of Firefox). However, there are several other RSS reader modules that display news in formats other than a news ticker.

  • https://addons.Mozilla.org/firefox/addon/bamboo-feed-reader/
  • https://addons.Mozilla.org/firefox/addon/NewsFox/

  You can also subscribe to feeds through web sites as follows.

  • http://www.feedly.com
  • http://my.Yahoo.com
  • http://www.newsblur.com

• Satellite L20: MS Excel add - Analysis ToolPak

  I have a Satellite L20 provided with Microsoft Office. I want to install the Analysis ToolPak add on, but it can not locate it on any of the provided disks.

  Clues?

  Thank you, Doug

  Hello Doug

  Your device comes with MS Office with Office OneNote2003. It is not the same. Because of this you don't find anything on the supplied CD.

• Analysis of controls

  I have a HP Photosmart 5510 and I use a MacBook Pro. I'm scanning my check to my computer and it keeps scanning only 3/4 of the audit, leaving the numbers, the most important part, cut. No matter how I flip, how I move it, it still cuts it. What can I do to fix this?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:
  
  If you use Mac OS X 10.7 (Lion), make sure to install the critical update below, otherwise skip to the next step:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg
  
  Now change the settings as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.
  
  Please let me know if that helps get the problem solved.
  Shlomi