anchor trust SSL

Hi guys,.

You try to view: https://www.pyrtec.com.au/ via firefox on mac (10.7.4), generates an error of trust anchor. Site is not approved yet in safari (on Mac) shows, it is confidence. Also to test on windows with IE, FF, and Safari displays the root certificate is approved. The certificate is signed by startcom SSL and is a root of trust mozilla authorized signatory. 12.0 running Firefox since version updated the channel. No new updates available at this time.

Also showing the error:
(Error code: sec_error_unknown_issuer)
Although I'm a bit lost exactly how to solve this problem. I checked the built in browser certificate firefox and checked both startcomm certificates are there, and it matches the mac built in certificates.

Im a little stuck as to where to go now.

The HTTPS version of the site does not work for me and does not work with Qualys SSL Labs FairSSL SSL Test either, so I guess it's a problem with the site itself.

I get these errors on the respective sites:

Evaluation failed: could not connect to the server
Connection timeout for the server www.pyrtec.com.au on port 443.
Check that the server is accessible from the internet. (o1)

Tags: Firefox

Similar Questions

  • VPN ssl cannot access the internet

    Hello guys!

    I need help to allow access to the internet for my vpn users. I can connect with Anyconnect but do not have access to the internet. Subnet for VPN is 192.168.100.0. I welcomed this subnet on my cisco router.

    ISP-> router-> 192.168.0.0-> ASA-> 192.168.1.0 (887VA)

    Here is my config:

    ASA Version 9.1 (3)

    mask of local pool AnyConnect 192.168.100.1 - 192.168.100.254 IP 255.255.255.0

    network of the NETWORK_OBJ_192.168.100.0_24 object

    255.255.255.0 subnet 192.168.100.0

    NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search to itinerary

    Trust SSL VPN outside

    Trust SSL VPN inside

    WebVPN

    allow inside

    allow outside

    AnyConnect image disk0:/anyconnect-win-3.1.04072-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    attributes of Group Policy DfltGrpPolicy

    L2TP ipsec ikev2 VPN-tunnel-Protocol

    internal GroupPolicy_VPN group strategy

    attributes of Group Policy GroupPolicy_VPN

    WINS server no

    client ssl-VPN-tunnel-Protocol

    Split-tunnel-policy tunnelall

    username alex Awards

    VPN-group-policy GroupPolicy_VPN

    VPN Tunnel-group type remote access

    General-attributes of VPN Tunnel-group

    address pool AnyConnect

    Group Policy - by default-GroupPolicy_VPN

    VPN Tunnel-group webvpn-attributes

    enable VPN group-alias

    Thank you very much!

    Hello

    Make sure you have this configuration

    permit same-security-traffic intra-interface

    You can check with

    See the race same-security-traffic

    If you don't have it then add it and test again.

    If this does not work after this then check if your router is to see all this traffic. For example you see any translation NAT on the router to your VPN users?

    What NAT configuration did you use for testing? I suggest 2 options above.

    First of all, one was to change the current VPN Client NAT0 configuration and dynamic addition PAT for VPN users to the Internet.

    Second, it was just to change the configuration of NAT0

    -Jouni

  • Cannot access within LAN of Cisco Anyconnect

    I'm new to the firewall and try to get my Anyconnect test configuration to connect to addresses within my Local network. The Anyconnect client connects easily, I can get to addresses Internet and tracer package told me it falls to phase 6, svc-webvpn. Can someone post my config? I don't know I'm missing something pretty obvious. Config is pasted below:

    !

    interface Ethernet0/0

    Description< uplink="" to="" isp="">

    switchport access vlan 20

    !

    interface Ethernet0/1

    Description< inside="">

    switchport access vlan 10

    Speed 100

    full duplex

    !

    interface Ethernet0/2

    Description< home="" switch="">

    switchport access vlan 10

    !

    interface Ethernet0/3

    switchport access vlan 10

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    Shutdown

    !

    interface Ethernet0/6

    Shutdown

    !

    interface Ethernet0/7

    Shutdown

    !

    interface Vlan10

    nameif inside

    security-level 100

    IP 192.168.1.99 address 255.255.255.0

    !

    interface Vlan20

    nameif OUTSIDE

    security-level 0

    DHCP client dns update

    IP address dhcp setroute

    !

    Vlan30 interface

    No nameif

    no level of security

    no ip address

    !

    Banner motd

    Banner motd +... +

    Banner motd |

    Banner motd | Any unauthorized use or access prohibited * |

    Banner motd |

    Banner motd | The Officer allowed the exclusive use.

    Banner motd | You must have explicit permission to access or |

    Banner motd | configure this device. All activities performed.

    Banner motd | on this unit can be saved and violations of.

    Banner motd | This strategy may result in disciplinary action, and |

    Banner motd | may be reported to the police authorities. |

    Banner motd |

    Banner motd | There is no right to privacy on this device. |

    Banner motd |

    Banner motd +... +

    Banner motd

    boot system Disk0: / asa824-k8

    passive FTP mode

    clock timezone cst - 6

    clock to summer time recurring cdt

    permit same-security-traffic intra-interface

    ICMP-type of object-group DEFAULT_ICMP

    Description< default="" icmp="" types="" permit="">

    response to echo ICMP-object

    ICMP-unreachable object

    ICMP-object has exceeded the time

    object-group network obj and AnyConnect

    host of the object-Network 192.168.7.20

    host of the object-Network 192.168.7.21

    host of the object-Network 192.168.7.22

    host of the object-Network 192.168.7.23

    host of the object-Network 192.168.7.24

    host of the object-Network 192.168.7.25

    access-list 101 extended allow icmp a whole

    !

    Note access-list ACL_OUTSIDE < anyconnect="" permit=""> >

    ACL_OUTSIDE list extended access permitted tcp everything any https eq

    ACL_OUTSIDE list extended access permit icmp any any DEFAULT_ICMP object-group

    !

    VPN_NAT list extended access permit ip host 192.168.7.20 all

    VPN_NAT list extended access permit ip host 192.168.7.21 all

    VPN_NAT list extended access permit ip host 192.168.7.22 all

    VPN_NAT list extended access permit ip host 192.168.7.23 all

    VPN_NAT list extended access permit ip host 192.168.7.24 all

    VPN_NAT list extended access permit ip host 192.168.7.25 all

    access-list extended sheep allowed ip group object obj-AnyConnect 192.168.1.0 255.255.255.0

    pager lines 24

    Enable logging

    timestamp of the record

    logging buffered information

    logging trap information

    exploitation forest asdm errors

    MTU 1500 inside

    Outside 1500 MTU

    mask 192.168.7.20 - 192.168.7.25 255.255.255.0 IP local pool AnyconnectPool

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 645.bin

    don't allow no asdm history

    ARP timeout 14400

    Global (1 interface OUTSIDE)

    NAT (INSIDE) 1 192.168.1.0 255.255.255.0

    NAT (OUTSIDE) 1 access-list VPN_NAT

    Access-group ACL_OUTSIDE in interface OUTSIDE

    !

    router RIP

    network 192.168.1.0

    passive-interface OUTSIDE

    version 2

    !

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication http LOCAL console

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    http 192.168.2.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Sysopt connection tcpmss 1200

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4688000 association

    Crypto-map dynamic dynmap 20 the value transform-set ESP-3DES-SHA

    map outside_map 64553-isakmp ipsec crypto dynamic dynmap

    outside_map interface card crypto OUTSIDE

    !

    ISAKMP crypto identity hostname

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    VPN-addr-assign local reuse-delay 120

    SSH 192.168.1.0 255.255.255.0 inside

    SSH 192.168.2.0 255.255.255.0 inside

    SSH timeout 60

    Console timeout 0

    management-access INTERIOR

    DHCP-client broadcast-flag

    dhcpd x.x.x.x dns

    dhcpd rental 43200

    dhcpd ping_timeout 2000

    dhcpd auto_config OUTSIDE

    !

    dhcpd address 192.168.1.150 - 192.168.1.180 inside

    dhcpd allow inside

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    NTP 216.229.0.179 Server

    SSL encryption, 3des-sha1-aes128-sha1 aes256-sha1 sha1 rc4

    localtrust point of trust SSL outdoors

    WebVPN

    allow outside

    AnyConnect essentials

    SVC disk0:/anyconnect-win-4.2.01035-k9.pkg 1 image

    SVC disk0:/anyconnect-linux-64-4.2.01035-k9.pkg 2 image

    Picture disk0:/anyconnect-macosx-i386-4.2.01035-k9.pkg 3 SVC

    enable SVC

    tunnel-group-list activate

    attributes of Group Policy DfltGrpPolicy

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    internal Anyconnect group strategy

    attributes Anyconnect-group policy

    value x.x.x.x DNS server

    VPN-tunnel-Protocol svc

    the address value AnyconnectPool pools

    type tunnel-group remotevpn remote access

    tunnel-group Anyconnect type remote access

    tunnel-group Anyconnect General attributes

    strategy-group-by default Anyconnect

    tunnel-group Anyconnect webvpn-attributes

    enable MY_RA group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    Auto-update 30 3 1 survey period

    Update automatic timeout 1

    call-home

    Profile of CiscoTAC-1

    no active account

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory

    monthly periodicals to subscribe to alert-group configuration

    daily periodic subscribe to alert-group telemetry

    Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e

    : end

    Hello

    You are missing a NAT FREE for Anyconnect traffic would allow you to access inside the network.

    access-list allowed sheep ip 192.168.1.0 255.255.255.0 192.168.7.0 255.255.255.0

    NAT (inside) 0 access-list sheep

    Add these two lines in the config file and you should be able to access the network interior.

    Kind regards

    Aditya

    Please evaluate the useful messages and mark the correct answers.

  • IKE initiator unable to find the policy; Outside INTF, CBC: error

    I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.

    See the config of bdavpn1 #.
    : Saved
    : Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
    !
    ASA Version 8.2 (2)
    !
    hostname bdavpn1
    domain.com domain name
    activate the encrypted password of OSaXLnYQKkAcBhYA
    2KFQnbNIdI.2KYOU encrypted passwd
    names of
    !
    interface Vlan1
    nameif inside
    security-level 100
    192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
    !
    interface Vlan3
    nameif dmz
    security-level 50
    IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
    !
    interface Vlan4
    Failover LAN Interface Description
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    switchport access vlan 91
    !
    interface Ethernet0/3
    switchport access vlan 3
    !
    interface Ethernet0/4
    switchport access vlan 3
    !
    interface Ethernet0/5
    switchport access vlan 4
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    passive FTP mode
    clock timezone AST - 4
    clock to summer time recurring ADT
    DNS domain-lookup dmz
    DNS server-group DefaultDNS
    Server name 172.20.0.99
    domain.com domain name
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    object-group Protocol TCPUDP
    object-protocol udp
    object-tcp protocol
    object-group network Chicago-nets
    object-network 10.150.1.0 255.255.255.0
    object-network 10.150.55.0 255.255.255.0
    object-network 10.150.56.0 255.255.255.0
    object-network 10.150.57.0 255.255.255.0
    object-network 172.16.1.0 255.255.255.0
    object-network 192.168.26.0 255.255.255.0
    object-network 10.150.111.0 255.255.255.0
    the DM_INLINE_NETWORK_2 object-group network
    object-network 192.168.4.0 255.255.255.0
    object Group Chicago-nets
    the DM_INLINE_NETWORK_1 object-group network
    object-network 192.168.4.0 255.255.255.0
    object Group Chicago-nets
    the DM_INLINE_NETWORK_3 object-group network
    object-NET 172.20.0.0 255.255.255.0
    object-network 192.168.2.0 255.255.255.0
    the DM_INLINE_NETWORK_4 object-group network
    object-NET 172.20.0.0 255.255.255.0
    object-network 192.168.2.0 255.255.255.0
    outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
    inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
    inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
    inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
    inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
    Note to access list outside_to_dmz allow access to the citrix Server
    outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
    dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
    Note to outside_access_in entering of Citrix access list
    outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
    outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
    pager lines 101
    Enable logging
    timestamp of the record
    logging paused
    logging buffered information
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    MTU 1500 dmz
    IP verify reverse path to the outside interface
    failover
    primary failover lan unit
    failover failover lan interface Vlan4
    failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 625.bin
    don't allow no asdm history
    ARP timeout 14400
    Global 1 interface (outside)
    Global interface (dmz) 2
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0
    static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
    Access-group outside_access_in in interface outside
    Access-group dmz_to_inside in dmz interface
    Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    AAA authentication enable LOCAL console
    AAA authentication http LOCAL console
    LOCAL AAA authentication serial console
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    LOCAL AAA authorization command
    Enable http server
    http 0.0.0.0 0.0.0.0 outdoors
    http 0.0.0.0 0.0.0.0 inside
    redirect http outside 80
    SNMP-server host inside 10.150.1.177 community survey * version 2 c
    SNMP-server host inside 10.150.2.38 community survey * version 2 c
    location of Server SNMP Hamilton, Bermuda
    SNMP Server contact René Bouchard
    Community SNMP-server
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Service resetoutside
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    inside
    redirect http outside 80
    SNMP-server host inside 10.150.1.177 community survey * version 2 c
    SNMP-server host inside 10.150.2.38 community survey * version 2 c
    location of Server SNMP Hamilton, Bermuda
    SNMP Server contact René Bouchard
    Community SNMP-server
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Service resetoutside
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    card crypto outside_map3 1 match address outside_cryptomap
    outside_map3 card crypto 1jeu peer 101.88.182.189
    outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
    card crypto game 2 outside_map3 address outside_2_cryptomap
    outside_map3 crypto map peer set 2 101.1.95.253
    card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
    Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map3 interface card crypto outside
    Crypto ca trustpoint bdavpn1
    Terminal registration
    domain name full bdavpn1.domain.bm
    name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
    Configure CRL
    Crypto ca certificate card domainincCertificateMap 10
    name of the object attr cn eq sslvpn.domain.com
    Crypto ca certificate chain bdavpn1
    certificate ca 00
    30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
    32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
    12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
    3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
    300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
    06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
    c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
    8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
    0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
    89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
    7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
    fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
    61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
    300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
    6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
    f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
    0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
    f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
    ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
    bedcbda7 caf46f0c b01def
    quit smoking
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    the Encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 20
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 30
    authentication rsa - sig
    3des encryption
    sha hash
    Group 2
    life 86400
    No encryption isakmp nat-traversal
    crypto ISAKMP ipsec-over-tcp port 10000
    Telnet 0.0.0.0 0.0.0.0 inside
    Telnet 0.0.0.0 0.0.0.0 outdoors
    Telnet timeout 120
    SSH enable ibou
    SSH 0.0.0.0 0.0.0.0 inside
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 60
    Console timeout 0
    management-access inside

    a basic threat threat detection
    threat detection statistics
    a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
    prefer NTP server 192.168.2.116 source inside
    NTP server 192.168.2.117 source inside
    bdavpn1 point of trust SSL outdoors
    WebVPN
    allow outside
    enable SVC
    attributes of Group Policy DfltGrpPolicy
    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
    LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
    domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
    tunnel-group sslvpn.domain.com type ipsec-l2l
    sslvpn.domain.com group of tunnel ipsec-attributes
    validation by the peer-id cert
    trust-point bdavpn1
    tunnel-group 101.88.182.189 type ipsec-l2l
    IPSec-attributes tunnel-group 101.88.182.189
    pre-shared-key *.
    tunnel-group 101.1.95.253 type ipsec-l2l
    IPSec-attributes tunnel-group 101.1.95.253
    pre-shared-key *.
    tunnel-Group-map enable rules
    Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    message-length maximum 10101
    ID-randomization
    ID-incompatibility action log
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    inspect the icmp
    inspect the icmp error
    inspect the amp-ipsec
    !
    global service-policy global_policy
    context of prompt hostname
    Cryptochecksum:a23ada0366576d96bd5c343645521107

    Scott,

    When you check the status of the two tunnels of the CLI, check the following:

    HS cry isa--> of his watch as active or QM_IDLE

    HS cry ips his--> shows the packages encrypted/decrypted

    The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.

    If this second tunnel is started but does not traffic, we might have a problem NAT or routing.

    Federico.

  • Certificates QuickVPN and WRV210 ignored

    I have a WRV210 router with the latest firmware (2.0.0.11) and QuickVPN (1.3.0.3). In addition very annoying that Windows 7 is not supported (I can work around that by using virtual machines running XP), I have a problem with the certificates.

    There is NO certificate in the QuickVPN directory

    If I start QuickVPN it gives the error: "the server certificate does not exist on your local computer. You want to leave this connection? ».

    However, if I click 'No', the connection continues in any case - and succeeds!

    Where is the security if the certificate is ignored?

    It seems to me that anyone with only the username and password can access the VPN

    On the continuation of the investigation, there is a presharedkey defined in "ipsec.conf. Now I played with certificates

    and had previously copied a certificate in this directory as the files get cached by here (or other) certificate

    If so this get overridden if a new certificate, copied in the directory QuickVPN?

    Read the help file on certificates, it seems to me that the question means really do you trust SSL

    certificate for the router is the router on the connection. I'm not an expert of VPN, but it seems to me that

    That's only half the story. How the router knows that the user is a user valid without a certificate of the user?

    I look it as the reason why you exported a certificate and has placed in the directory QuickVPN - IE to authenticate the user

    What I'm missing here?

    Another inconvenience - if I click 'Yes' to end the connection, I picked at QuickVPN but it

    There is NO easy way to close the application. You can minimize it, but you can't close without the Task Manager.

    It is also a security problem since minimizing removes the icon from the taskbar (I know there is an icon in the)

    System tray, but the only way to determine this icon of is to select Help) so a user assumes

    the program has ended but to restart the program simply restores the client with the full password.

    QuickVPN Client uses the certificate to authenticate the server QuickVPN, which presents its certificate to the Client in the initial SSL handshake.

  • CERT ID on ASA change with impact session AnyConnect?

    Hello all - I should probably know this answer, however, I'm not 100%.

    If I change the cert ID (trust point) of the external interface to use a "most recent" certificate, although there are client AnyConnect connected, the session will end?

    I believe that the answer is Yes, since the keys will change.

    Any help is appreciated!

    Thank you!

    Hello

    He not disconnect users, because the main purpose of the use of cert in the first place other than identity is to distribute safe symmetric session key. Once this is done, the work of cert is done.

    I did a quick test on my end.

    I have connected a customer to the ASA using certificates. Here are the results:

    ASA-32-25 # sh run all the ssl
    SSL server-version everything
    client SSL version all
    SSL encryption, 3des-sha1-aes128-sha1 aes256-sha1 md5 - rc4-rc4-sha1
    Trust SSL SSL outdoors<-- this="" is="" the="" certificate="" applied="" on="" outside="">
    SSL certificate authentication CAF-timeout 2

    Now, I have connected my client and he got connected successfully:

    ASA-32-25 (config) # poster not vpn - its

    Session type: AnyConnect

    Username: anyconnect Index: 50
    Public IP address 192.168.10.2 assigned IP:: x.x.x.x
    Protocol: AnyConnect-Parent-Tunnel SSL
    License: AnyConnect Premium
    Encryption: AnyConnect-Parent: (1) no SSL Tunnel: 3DES (1)
    Hash: AnyConnect-Parent: (1) no SSL Tunnel: SHA1 (1)
    TX Bytes: 11488 bytes Rx: 1351
    Group Policy: Group GroupPolicy_Test Tunnel: Test
    Connect time: 12:24:15 EDT Thursday, April 17, 2014
    Time: 0 h: 00 m: 04 s
    Inactivity: 0 h: 00 m: 00s
    Result of the NAC: unknown
    Map VLANS: VLAN n/a: no

    I removed then, the certificate for the external interface.

    ASA-32-25 (config) # points trust without ssl SSL outdoors

    And when I checked the status of the connected client, I saw that he was still logged:

    ASA-32-25 (config) # poster not vpn - its

    Session type: AnyConnect

    Username: anyconnect Index: 50
    Public IP address 192.168.10.2 assigned IP:: x.x.x.x
    Protocol: AnyConnect-Parent-Tunnel SSL
    License: AnyConnect Premium
    Encryption: AnyConnect-Parent: (1) no SSL Tunnel: 3DES (1)
    Hash: AnyConnect-Parent: (1) no SSL Tunnel: SHA1 (1)
    TX Bytes: 11488 bytes Rx: 1351
    Group Policy: Group GroupPolicy_Test Tunnel: Test
    Connect time: 12:24:15 EDT Thursday, April 17, 2014
    Time: 0 h: 00 m: 12s
    Inactivity: 0 h: 00 m: 00s
    Result of the NAC: unknown
    Map VLANS: VLAN n/a: no

    The conclusion therefore, is that users will not be cut if you change the certificate on the external interface.

    Hope that answers your question.

    Vishnu

  • Breeze remote VPN VPN site-to-site

    Excuse me, but I am a novice with this and in over my head.

    I'm trying to add features to remote VPN to a small office ASA5505 that works well for external access to the ' net and has a tunnel from site to site in an office in another city.

    After the various guides, I have added (or tried to add) the necessary configuration, but when I try to add cryptographic declarations for the remote vpn, VPN site-to-site goes down.  The internal network is on 10.1.10.0/24 and remote users must be on the 192.168.30.0/24 subnet

    I would appreciate anyone pointing out some stupid mistake that I made.  Here is the configuration of private information and outside addresses "cleaned."

    Thanks in advance for your suggestions!

    ======================================================

    ASA Version 8.2 (5)

    !

    asa-hhh hostname

    xyz.com domain name

    activate 1ltRLCMh8jwpmLdb encrypted password

    1ltRLCMh8jwpmLdb encrypted passwd

    names of

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 10.1.10.1 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address xxx.xxx.xxx.241 255.255.255.248

    !

    passive FTP mode

    clock timezone CST - 6

    clock to summer time recurring CDT

    DNS server-group DefaultDNS

    domain peissel.com

    outside_in list extended access permit icmp any any echo response

    outside_in list extended access deny ip any any newspaper

    list of access VPN AUS ip 10.1.10.0 scopes allow 255.255.255.0 192.168.1.0 255.255.255.0

    access-list SHEEP extended ip 10.1.10.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

    access extensive list ip 10.1.10.0 splittunnel allow 255.255.255.0 192.168.30.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    IP local pool vpnpool 192.168.30.1 - 192.168.30.254

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 643.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list SHEEP

    NAT (inside) 1 10.1.10.0 255.255.255.0

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.246 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    Enable http server

    http 10.1.10.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-3des esp-sha-hmac espSHA3DESproto

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-3DES-MD5 value

    crypto IPSEC 10 card matches the address VPN-AUS

    card crypto IPSEC 10 set peer yy.yy.yy.33

    card crypto IPSEC transform-set espSHA3DESproto value 10

    card crypto IPSEC outside interface

    Crypto ca trustpoint localtrust

    registration auto

    domain name full abc.xyz.com

    sslvpnkey key pair

    Configure CRL

    Crypto ca certificate chain localtrust

    certificate 68b4ea4e

    b4fe602b 58b8deaf df648bf3 512a5be1 3fd1e2df 3ae2dc41 2602cd 67 0500bb88 e1

    quit smoking

    crypto isakmp identity address

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 20

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 10.1.10.0 255.255.255.0 inside

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH timeout 5

    Console timeout 0

    dhcpd address 10.1.10.10 - 10.1.10.40 inside

    interface dns 8.8.8.8 dhcpd inside

    rental contract interface 86400 dhcpd inside

    dhcpd peissel.com area inside interface

    dhcpd allow inside

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    NTP server 192.5.41.41 source outdoors

    NTP server 192.5.41.40 source outdoors

    localtrust point of trust SSL outdoors

    WebVPN

    allow outside

    enable SVC

    internal remotevpn group policy

    attributes of the strategy of group remotevpn

    VPN-idle-timeout 30

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list splittunnel

    myname 8NYVxDRPHUNYpspD encrypted privilege 15 password username

    user myname attributes name

    type of service admin

    username the user password encrypted remote /yoq2HhsDPlgKIdN

    tunnel-group yy.yy.yy.33 type ipsec-l2l

    yy.yy.yy.33 group of tunnel ipsec-attributes

    pre-shared key *.

    ISAKMP retry threshold 30 keepalive 5

    type tunnel-group remotevpn remote access

    tunnel-group remotevpn General-attributes

    address vpnpool pool

    Group Policy - by default-remotevpn

    remotevpn group of tunnel ipsec-attributes

    pre-shared key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:465a4a58a8ad00e66259d93e645b3ed1

    : end

    Hello

    Try these configuration changes

    Create an ACL from Tunnel simpler Split (standard type that indicates which networks of tunnel)

    standard access list permits 10.1.10.0 SPLIT-TUNNEL 255.255.255.0

    Modify the ACL of Split Tunnel in use

    attributes of the strategy of group remotevpn

    No split-tunnel-network-list splittunnel value

    Split-tunnel-network-list value of SPLIT TUNNEL

    Remove the old ACL of the ASA

    No splittunnel Access 10.1.10.0 ip range list allow 255.255.255.0 192.168.30.0 255.255.255.0

    Add NAT0 rule for the VPN Client to the LAN traffic that you were missing (only had one for VPN L2L)

    access-list SHEEP extended ip 10.1.10.0 allow 255.255.255.0 192.168.30.0 255.255.255.0

    May also add the following

    fixup protocol icmp

    It will add ICMP Inspection to the ASA. Accelerations passing messages ICMP Echo Reply through the ASA.

    Hope this helps

    Don't forget to check the answer as the answer if it answered your question. And/or useful response rates

    -Jouni

  • AnyConnect VPN connected but not in LAN access

    Hello

    I just connfigured an ASA to remote VPN. I think everything works but I do not have access

    for customers in the Local LAN behind the ASA.

    PC <==internet==>outside of the SAA inside<=LAN=> PC

    After AnyConnect has established the connection I can ping inside the Interface of the ASA

    but I can't Ping the PC behind the inside Interface.

    Here is the config of the ASA5505:

    : Saved

    :

    ASA Version 8.2 (1)

    !

    asa5505 hostname

    activate 8Ry2YjIyt7RRXU24 encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 192.168.178.254 255.255.255.0

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    Shutdown

    !

    interface Ethernet0/3

    Shutdown

    !

    interface Ethernet0/4

    Shutdown

    !

    interface Ethernet0/5

    Shutdown

    !

    interface Ethernet0/6

    Shutdown

    !

    interface Ethernet0/7

    Shutdown

    !

    passive FTP mode

    Inside_ICMP list extended access permit icmp any any echo response

    Inside_ICMP list extended access permit icmp any any source-quench

    Inside_ICMP list extended access allow all unreachable icmp

    Inside_ICMP list extended access permit icmp any one time exceed

    access-list outside_cryptomap_2 note ACL traffic von ASA5505 zur ASA5510

    outside_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0

    no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0

    no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.178.0 255.255.255.0

    tunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0

    pager lines 24

    Within 1500 MTU

    Outside 1500 MTU

    mask 192.168.1.10 - 192.168.1.15 255.255.255.0 IP local pool SSLClientPool

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access no_NAT

    NAT (inside) 1 192.168.1.0 255.255.255.0

    Access-group Inside_ICMP in interface outside

    Route outside 0.0.0.0 0.0.0.0 192.168.178.1 1

    Route outside 192.168.10.0 255.255.255.0 192.168.178.230 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication http LOCAL console

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set-3DESSHA FRA esp-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    card crypto outside_map 2 match address outside_cryptomap_2

    peer set card crypto outside_map 2 192.168.178.230

    card crypto outside_map 2 game of transformation-FRA-3DESSHA

    outside_map interface card crypto outside

    Crypto ca trustpoint localtrust

    registration auto

    domain name full cisco - asa5505.fritz.box

    name of the object CN = cisco - asa5505.fritz.box

    sslvpnkeypair key pair

    Configure CRL

    Crypto ca certificate chain localtrust

    certificate fa647850

    3082020b a0030201 30820174 020204fa 0d06092a 64785030 864886f7 0d 010104

    0500304 06035504 03131763 6973636f 617361 35353035 2e667269 2d 3120301e a

    747a2e62 6f783126 30240609 2a 864886 f70d0109 02161763 6973636f 2d 617361

    2e667269 35353035 747a2e62 6f78301e 170d 3132 31303132 31383434 31305a 17

    323231 30313031 38343431 06035504 03131763 6973636f 3120301e 305a304a 0d

    617361 35353035 2e667269 747a2e62 6f783126 2a 864886 30240609 f70d0109 2D

    6973636f 02161763 2d 617361 35353035 2e667269 747a2e62 6f783081 9f300d06

    d6279e1c 8181009f 092a 8648 86f70d01 01010500 03818d 30818902 00 38454fc 9

    705e1e58 762edc35 e64262fb ee55f47b 8d62dda2 102c8a22 c97e395f 2a9c0ebb

    f2881528 beb6e9c3 89d91dda f7fe77a4 2a1fda55 f8d930b8 3310a05f 622dfc8f

    d48ea749 7bbc4520 68 has 06392 d65d3b87 0270e41b 512a4e89 94e60167 e2fa854a

    87ec04fa e95df04f 3ff3336e c7437e30 ffbd90b5 47308502 03010001 300 d 0609

    2a 864886 04050003 81810065 cc9e6414 3c322d1d b191983c 97b474a8 f70d0101

    2e5c7774 9d54d3ec fc4ee92d c72eef27 a79ce95a da83424f b05721c0 9119e7ea

    c5431998 e6cd8272 de17b5ff 5b1839b5 795fb2a0 2d10b479 056478fa 041555dd

    bfe3960a 4fe596ec de54d58b a5fa187e 5967789a a26872ef a33b73ec 7d7673b9

    c8af6eb0 46425cd 2 765f667d 4022c 6

    quit smoking

    crypto ISAKMP allow outside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 65535

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    management-access inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    localtrust point of trust SSL outdoors

    WebVPN

    allow outside

    SVC disk0:/anyconnect-win-2.3.0254-k9.pkg 1 image

    SVC disk0:/anyconnect-wince-ARMv4I-2.3.0254-k9.pkg 2 image

    enable SVC

    tunnel-group-list activate

    internal SSLClientPolicy group strategy

    attributes of Group Policy SSLClientPolicy

    VPN-tunnel-Protocol svc

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value split tunnel

    the address value SSLClientPool pools

    WebVPN

    SVC Dungeon-Installer installed

    time to generate a new key of SVC 30

    SVC generate a new method ssl key

    SVC request no svc default

    username password asdm privilege Yvx83jxa2WCRAZ/m number 15

    hajo 2w8CnP1hHKVozsC1 encrypted password username

    hajo attributes username

    type of remote access service

    tunnel-group 192.168.178.230 type ipsec-l2l

    IPSec-attributes tunnel-group 192.168.178.230

    pre-shared-key *.

    type tunnel-group SSLClientProfile remote access

    attributes global-tunnel-group SSLClientProfile

    Group Policy - by default-SSLClientPolicy

    tunnel-group SSLClientProfile webvpn-attributes

    enable SSLVPNClient group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    !

    global service-policy global_policy

    context of prompt hostname

    Cryptochecksum:0008564b545500650840cf27eb06b957

    : end

    What wrong with my setup.

    Concerning

    Hans-Jürgen Guenter

    Hello Hans,.

    You should change your VPN pool to be a different subnet within the network, for example: 192.168.5.0/24

    Then configure NAT exemption for traffic between the Interior and the pool of vpn.

    Based on your current configuration, the following changes:

    mask 192.168.5.10 - 192.168.5.15 255.255.255.0 IP local pool SSLClientPool

    no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0

    And then also to enable icmp inspection:

    Policy-map global_policy

    class inspection_default

    inspect the icmp

  • Impossible to obtain Verisign Signature validated in Acrobat

    For the last six months, I was able to get my digital signature Verisign validated in Adobe Acrobat format. Just today, I renewed my Verisign certificate for another year. I saved the certificate on my hard drive using a password to fix it. When I certify a my signature on a document, the resulting signature icon says "...". invalid persona"and the icon in the upper left corner (the head and shoulders of a person) has an exclamation mark on it.

    I am frustrated trying to figure out what is wrong. Any suggestions would be greatly appreciated.

    Hi Mike,.

    Acrobat (and when I say Acrobat Acrobat and Reader time) it is sufficient to establish a valid string. If you have selected one of the root certificates as the anchor of trust and that the signature is valid, then you're done. One thing I suggest you do is to ensure that all certificates below the anchor of trust have the revocation information. In the view of the certificate dialog box, you can select the revocation tab. As you highlight (select) each cert below the anchor trust you should see information in the Details window on the revocation information. If the text says that it is missing or there are problems let me know, otherwise you are good to go.

    Either way, you might be able to uncheck display all found certification paths (above the window where you see three identical channels) and then you will see only the a string that uses Acrobat. That could help to simplify things.

    Finally, it would be great if you could mark the thread as answered (that is, only if you feel the question was answered) to help other people looking for the forum close to the bottom of what you have to look.

    Thank you

    Steve

  • Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

    I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

    I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

    Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

    "Connection to the blog error."

    An error occurred while trying to connect to your blog

    The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
    You must correct this error before proceeding. "

    Please help me solve this problem. Your valuable advice is apprecited. Thank you.

    Post in the MSE forums:

    http://answers.Microsoft.com/en-us/protect/default.aspx

  • is there a work around for the connection with https. the ssl/tls security patch prevents us to connect to a known trusted site

    I made the mistake of updating to Firefox yesterday and with the ssl security fix find I can most connect to a web site in a data center which is protected by a fortigate appliance.

    I know the correct answer is to get the updated device updated or replaced, but in the meantime, I'm desperately need a workaround solution. It would be nice if there was an archive of old versions of Firefox.

    I changed the configuration settings to allow the renegotiation, but I think that the problem is more fundamental than that it does not appear that older versions of ssl are more provided.

    The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

    See comment 60 in this bug report for workaround, but be aware that this makes you vulnerable to the attack of the BEAST.

    • bug 702111 - intolerant servers to record split of 1: n-1. "The connection was reset".
  • No configured SSL trust-points

    Working on VPN and we find errors not declaring no TP.  Do you have a ssl sh / sh run ssl and weird to get information, but need help with the understanding of the TP

    These newspapers is expected as you do not have the root cert to check the certificates that the client sends:

    CRYPTO_PKI: Verifying certificate with serial number: 039F, subject name: cn=DOD EMAIL CA-31,ou=PKI,ou=DoD,o=U.S. Government,c=US, issuer_name: cn=DoD Root CA 2,ou=PKI,ou=DoD,o=U.S. Government,c=US, signature alg: SHA1/RSA.
    
    CRYPTO_PKI(Cert Lookup) issuer="cn=DoD Root CA 2,ou=PKI,ou=DoD,o=U.S. Government,c=US" serial number=03 9f                                              |  ..
    
    CRYPTO_PKI: No suitable TP status.
    
    for Eg. Make sure you have the root cert issued for: "cn=DoD Root CA 2,ou=PKI,ou=DoD,o=U.S. Government,c=US"
    
    once you have configured the trauspoint, you need to bind it to the interface as well:ssl trustpoint  
    
    also there are ldap errors:[58] Simple authentication for admin12 returned code (49) Invalid credentials
    [58] Failed to bind as administrator returned code (-1) Can't contact LDAP server
    
    this means that the ASA is not able to bind to the LDAP server using the admin account; can you check the login password for the ldap server in the ASA's config.
  • Is there a plugin trust to access a list of sites in SSL only, similar to the extension, use HTTPS on Google Chrome?

    I need access to most of the sites I visit in a secure connection (https). In Google Chrome, there is an extension called 'Use https', but I'm rather uncomfortable using Chrome. Is there a plugin on Firefox?
    I use Firefox 4.0.1

    Take a look at these:

  • Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

    Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

    Firefox never includes the intermediate certificates.
    It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

    Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
    If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

  • F5 ssl vpn 7070.2012.1026.1

    Firefox v31.0
    OSX 10.9.4

    Try to connect to my VPN company and this error after update v31.0

    An error occurred during a connection to (xxxxx.xxxxx.xxxxx).
    The peer certificate has an invalid signature.
    (Error code: sec_error_bad_signature)

    If I read the article of GROUND this plugin has been in the white list until v34.0

    I have spent a few hours trying different '' correction '' and came here for one more satisfactory answer other that "try another browser.

    Hi HVKStudios,
    In version 31, there was an update to the certificate manager called Mozilla:pix. If there are several people know that your site it is possible to fill a bug for further investigation report.

    You will need to manually install the CA is missing and trust him to validate Web sites: https://ssl-tools.net/certificates/d6c1d14529e2623069fddea60c0ff6884329...

    Alternatively, you can try to turn this pref to false on the subject: config page.

       *security.use_mozillapkix_verification = false
    

Maybe you are looking for

  • Tecra S5 - disk hard turn sound

    Our company recently purchased Toshiba Tecra S5. I noticed that the drive have that ticking sound as if there is a watch inside. Is this normal? Anyone of you have this experience too? Thanks in advance for your answer

  • How to model generic spices work in multisim?

    I have a model external Spice, I need to use occasionally.  I alsways have trouble with that.  It doesn't seem to be because I don't understand the models or how operation spices, but more than the conventions to set and get properly hanging nodes an

  • Error error Code 8024A 000 Windows update

    I was informed by a Microsoft support for a clean install of Vista because I never got my automatic updates to work. I did a clean install of Vista 32 b and I still can't update. Not only that, but I was instructed not to enter my product during the

  • BHO. DLL & IE3SH problems on my computer starts?

    When I boot my laptop, these two buttons appear. 1 / "this application has failed to start because BHO.". DLL was not found. Reinstall the application may fix the problem. The top of this box is titled - "unable to locate the ie3sh.exe component." 2

  • Microsoft continues to provide updates to update for Windows 7 Home Premium after Windows 10 come out?

    Hello Microsoft community. I decided that I didn't update Windows 10. The updates I received created too many problems with my laptop. Not only that, but I wanted to keep Windows Media Center. Quite frankly, I like it. To solve the problems I had, I