And clearing memory all-in-one HP Deskjet 5440 and Officejet 7310xi

Similar Questions

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• All-in-one HP DeskJet 2130: all-in-one x 2 align

  I can't get an alignment page printed with my printer all-in-one HP DeskJet 2130 new (just out of the box).

  I have installed two ink cartridges, loaded paper and did not get an automatic alignment page print as the directions say I would. I put a piece a document on the glass of the scanner as shown and then press the START COPY BLACK button nothing works. The book comes out just of Virgin. I do the same thing with the button COPY COLOR START, get the same results.

  I turned the printer market twice, installed the printer software and tried again... still a blank alignment page.

  I used the new ink cartridges, not supplied with the printer... could they be defective? Any ideas? Thank you very much!
  
  (Wireless Internet connection, if it matters.)

  Hi @TillyBonsall,

  Welcome to the HP Forums!

  I read your post about how you get a page Virgin alignment with your printer HP Deskjet 2130. I'm happy to help with this alignment problem.

  What happens if you try to print a self-test page? Print a self-test Page.

  What operating system you use, Windows or Mac? What version? https://www.whatsmyos.com.

  In the meantime, please, try the procedure described in this guide, "Alignment failed" Error Messageand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• All-in-one HP Deskjet 2060 K110 series does not scan

  The power button of my K110 series all-in-one HP Deskjet 2060 is always enabled. Also, a doen't work scan. What should I do? Thank you!

  Hello

  You can try uninstaling your printer and then reinsert.

  Use this HP link > put in your operating system > follow through the following Web page > he'll be correct that information it tell you how to make and also how to get the right Drivers to install.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4157336&LC=en&cc=us&DLC=en&lang=en&cc=us

  If you can't fix it according to the information here, contact HP support.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• Cannot scan computer with J611 of all-in-one HP Deskjet 3050 a

  I use WIndows 7.

  I can scan from the all-in-one HP Deskjet 3050 a J611 assistance from the control panel.

  I was able to run a scan of the computer. But now when I select the icon on the desktop to my all-in-one HP Deskjet 3050 a J611, I see more scan options.

  Shane,

  I connected with a USB cable and everything works now. It is not convenient, but it's a solution. It's still a mystery as to why he's working for a few months and then suddenly stopped working.

  In any case, thanks for the follow up several times and find a work around.

  I'll provide Bravo and mark this thread as provided solution!

• my HP Deskjet Ink Advantage 45: my compatible printer ink e-all-in-one-HP Deskjet Ink Advantage 4515

  We got my HP Deskjet Ink Advantage 4515 e-all-in-one printer from abroad and it is initially with ink jet 650 but when we checked, it is not available on our space, it is listed on the Web site that 678 as its compatible ink. It is safe to assume that 678 inkjet will work on our printer? Help, please.

  Hi @flyingknee,

  Welcome to the community of HP,

  I understand that you are looking for a compatible with your HP Deskjet Ink Advantage 4515 ink cartridge, and I'll be happy to help you.

  I found this picture on the HP site that shows the different cartridges compatible with the HP Deskjet Ink Advantage 4515 e-all-in-one printer for the different regions.

  Source

  Series printer e-all-in-one-HP Deskjet Ink Advantage 4510

  The following table shows the information of ink cartridge for HP Deskjet Ink Advantage e-all-in-one 4510 Printer series.

• HP Deskjet 1510 all-in-One -: HP Deskjet 1510 all-in-One - scanner not recognized

  Establishing another laptop for my all-in-one HP Deskjet 1501. The printer works well, but I do not see the scanner information pop up. With my other laptop, he did. One reason why the scanner is not recognized? Thank you!

  Hello escada48,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  However, you can see the printer on the desktop icon you. Click it to open the Printer Wizard , and then click the Scan Picture ready.

• All-in-one HP Deskjet 6310. Win 8 64-bit on ASUS Q200e.

  All-in-one HP Deskjet 6010 is loaded by Microsoft. If this isn't the case, HP driver on the HP site will include HP Solution Center similer to the driver for XP? And HP Photosmart first will be responsible as well?

  I'm afraid there is no way to get a CD with the drivers and software for Windows 8.  The only option is to download.  Normally the download will have the same software that the CD anyway, if you're not losing anything by installing the printer in this way.  I'm not sure that all software is delivered with the latest software, but it should be more, if not all of the software you got with previous versions.

  HP Photosmart and Officejet Full Feature software and drivers

• This e in section number of copies on all in one printer deskjet 4335.

  Someone knows how to get the E number of copies on an all in one printer deskjet f335

  Thank you

• SER all-in-one HP Deskjet 3630: printers and drivers

  How to install the software of HP Deskjet 3630 series all-in-one software on a laptop Windows 8.1?

  Simple, you go to the HP web site...

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3630-all-in-one-printer-series/7172306

  Download the drivers and full software and install them.   Download your user guide and read it.  There is also an update of the firmware...

• All-in-one HP Deskjet 3050 a J611 series - mavericks and wireless set up

  Hello

  I have a HP Deskjet 3040 A J611 all-in-one printer, I have had this printer for about 2 years and everything worked perfectly then I bought an Apple again everything was fine but when I updated my software that I got from the Mavericks and since then everything has gone wrong... I updated my computer and I got AirPrint now and also HP ePrint (currently). How was never the printer don't work or connection.

  Problem 1:

  When I tried to solve the problem that I uninstalled all HP drivers to reinstall - found you must install apple application made! (Airprint)

  The printer was taken over by the computer and I can scan but I can not print, I am using the USB cable and when I print the computer indicates it's printing and printers lights but nothing happens (no), then the computer shows the impression is made - but the printer does not print. Scan works very well.

  Problem 2:

  Due to recurring problems with the wireless connection, I wanted to reconnect to the router - restore the default value.

  But now, because I don't have the drivers of HP, I have no idea how to connect to it and I tried two ways of connection THAT WPS is not working when I press on the road... nothing happens and the PIN, where are you suppose to enter the PIN, nothing comes up on my computer (USB connected)

  I read the installation times pages but may not know what is wrong, any advice would be appreciated.

  Hi Lilly4,

  I can certainly help you get the printer on the network and running again.

  Follow the steps in this thread to turn the printer on the network without using the software or the WPS button. I think we do this way of success.

  If you continue to experience a problem once the printer on the network, please let me know. Thank you.

  I hope this helps.

• RE: SCANNING AND RETOUCHING WITH A PRINTER ALL-IN-ONE HP DESKJET 2540.

  I have a new HP 2540 all-in-one printer and it works beautifully! The only thing is that when I scan a document and want to change I can't. This printer does not come with a built-in OCR program?

  Help, please!

  Thank you

  Hello MACUDDLYand welcome to the Forums of HP.

  I see that you have problems editing your scans.  This printer is not equipped with OCR software.  If you are looking to change with OCR software, I would say downloading and using the OCR of third party service.

  Please let me know if you have any other questions.  Thanks for posting on the HP Forums.