Android APP and Native application using the same push record ID

Similar Questions

• The SD card is accessible by a BB App and Windows Explorer at the same time?

  Hello

  My requirement is that the SD card must be consulted by a BB App and Windows Explorer at the same time. But the BB app I developed is able to access the SD card only when the mass storage mode is turned off. Is this how the BB has designed or is it possible to have some logical coding for this?

  Thank you

  No, this is not possible.

• Load of Lightroom for Mac and Windows PC using the same serial number

  Would I be able to load lightroom for my MAc and Windows PCs using the same serial number?

  Yes (if you have purchased the full version).

  Thank you

  Nikhil

• Differentiation between virtual App and Native application

  Hello team,

  Wanted to know how the difference between a virtual application and the local physical application. Y at - it any key or variable registry system available which can help identify the virtual when its application was managed by the end user during execution. Are there any files and registry system for virtual applications?

  For example: from online Cameyo/ThinApp/spoon streaming server, I downloaded firefox.exe virtualized and thus downloaded mozilla's physical firefox.exe and installed (Version remains the same for the application). For physical firefox.exe there is the registry key or a variable system available.

  How about the application virtual firefox.exe, will there be an entry in the system registry or files during its execution?

  If Yes please share the details.

  You have different ways to determine if the application was packaged with ThinApp.

  • When you run a ThinApp application, you have the popup appears above the system tray in the lower right corner with the name of the application and "vmware".

  

  • When you have installed the application with the MSI or save it with the thinreg utility, you have created registry keys:
    • If installed by user: HKCU\Software\Thinstall
    • If installed by computer: HKLM\Software\Thinstall
  • A sandbox is also created for the application during its first execution in %APPDATA%\Thinstall (default location).
  • If you run the package with the setting -ThinstallVersion. For example, in a CMD prompt type: package.exe - ThinstallVersion.

  You will get the ThinApp version used to build the package.

  

  • If you need to determine if the application was packaged with ThinApp of more "automatic" or "script", use the software ThinApp SDK. Look for example here: http://www.horizonflux.com/getting-started-with-thinapp-sdk-and-powershell/

• software and downloading applications at the same time

  If iphone not too hot during the software update and download the applications at the same time?

  If the phone gets too hot, it will turn off.

• Separate installs Palm desktop for Palm M505 and its applications, Palm Treo 680 and its applications on the same computer in Windows XP?

  Hello:

  I'm doing a work around. I have a Palm M505 with a fantastic keyboard that connects to it. This allows me to write documents in a very portable way. The Treo 680 has never been the equivalent external keyboard, really full compatible with it rendering. So, I want to create documents on the M505 but otherwise use especially the Treo 680.

  That's the problem. When I tried to synchronize two devices for my Palm Desktop version 4.1.2 for Windows XP, it did not work. HotSync to synchronize applications that do not work on the M505. In addition, versions of Documents to Go are very different (5.x versus 8.x).

  I have a separate installation of Palm Desktop for each device, so I can have a nice desktop environment for each launching them separately. But the Palm Desktop installation "Wizard" stops and does not give me the opportunity to do a separate install of funds.

  Any ideas other than the purchase of an ultra compact laptop and drop this scheme kludgy? For example, if I had to copy the installed files in files from one directory to another, this work or would would he not put in place in the registry?

  Thank you!

  Very well. Stubbornness is paying off! I could beam documents between my Palm M505 and Treo 680, avoiding the need of complicated synchronization of the two Palms for my laptop. I was also able to transmit documents of both palms to my laptop Dell Inspiron M300, running Windows XP Pro.

  When transferring between Palm devices, the results were better. In the M505, Documents to Go version 5,004 does not translate documents in Microsoft Word format, but in something he calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word format Go and save Microsoft Word for Windows format natively.

  However, even when transferring a word in the document (old format) Go directly on my Windows XP computer desktop, he gave me a document that I could open, with the text that I would be entered following a bunch of Word characters obviously did not understand. If I add the file from my office to the most recent Documents to Go version on my laptop, I would expect that it it mean in a Word file when it sync for the Treo, but who were not on trial. In both cases, beaming between devices Palm is the simplest solution and has completely solved the problem.

  For readers who are interested, that I so stubbornly tried to solve this problem because I am a typist quick touch. My old Palm M505 plugs directly into a Portable Palm both wonderful, old keyboard which is full size. Because it is a wired connection, I can type fast. This old keyboard compresses in the same footprint folded as some new keyboards external foldover. Even though much more bigger by folding it together in an accordion - like fashion, with record four flat surfaces. The design of this keyboard is now in some keyboards sold by the IGo Corporation (their former name for it was Sierra Stowaway Bluetooth keyboard). But they were unable to find a way to handshake their Bluetooth with the strange configuration Bluetooth in the Treo 680. Why from the library different Bluetooth in the Treo 680 Palm other Treo is a mystery to me, but enough of this tangent. Some interested by this workaround can be curious for the same reasons.

  Message is about: Treo 680 (Cingular)

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• Will be 5 d Mark III and T5, T5i and T6i rebel use the same lenses

  I have the 5 d Mark III and some big L series lenses. I'll buy a rebel for my GF to learn photography. My lenses will work for her T5, T5i or T6i?

  Thank you!

  Yes - but it doesn't work the other way around.

  Canon EOS "EF" series lenses (including all your 'L' series lenses) will work on ANY body camera Canon EOS Digital or analogue, and regardless of whether a digital camera has a sensor size full frame (like the 5 d which has a sensor the same size as a 35 mm film negative) or a crop-frame camera (as the series body rebels who use the size of the) sensor 'APS - C' which is a bit smaller.)

  But suppose you get your GF body rebel... it'll come with a "kit" lens (usually this kit lens is the EF-S 18-55mm f/3.5-5.6 IS II or EF - S 18-55mm f/3.5-5.6 IS STM).  But that goal is an EF-S lens.  The image that projects of the lens in the camera body is large enough to fill the surface of the sensor to a corner to for an APS - C sensor... but it is NOT an image large enough to cover the size of a sensor full-frame corner.  Advantage of the EF-S-objectives, is that they can produce a high quality image that does not need more large than an EF lens, and because of this, they are able to reduce the manufacturing cost of the lens and THIS means that the lens can be offered at a lower price than the somewhat similar focal ranges EF lenses.

  These objectives EF-S can be used on any digital camera Canon EOS which has a sensor size 'APS - C' (any body of the rebel, also all the 20 d with 70 d series), as well as the 7 d bodies but may not be used on any body of the camera which uses a larger sensor (any body standard standard 6 d or 1 d 5 d requires "EF" lenses).

  Specialty lenses like the tilt-shift (TS-E) and the extreme (MP-E) macrophoto lens can be used on any EOS body (just like the objectives EF.)

• Best practices for the configuration of HTML5 and native connector at the same time.

  Is it possible to configure the HTML5 and native connector for my users? What would be the best configuration?

  The best way I found to do this is to create 2 web interface sites. one configured for native connector and one for HTML5. I put a URL in the message with a message center as "it is the site of native connector. Click on to HTML 5 ". A similar message with a URL to the site of native connector is on the site of HTML 5.

  Scott.

• How to use the Arc keyboard and mouse Arc using the same USB Transceiver?

  I bought a bow from Microsoft and Microsoft Arc mouse keyboard.

  Both devices come with their own 2.4 GHz USB tranceivers.

  I want to connect the keyboard and mouse to a transceiver.

  I can't find any instructions on how to do it.

  In comparison, my Logitech keyboard and mouse comes with software that allows me to pair several devices to the same Transceiver.

  How to connect the keyboard and mouse to a transceiver?

  P.

  As far as I know, you can do that.  If you want the keyboard and mouse on a transceiver, you buy a keyboard/mouse kit, commonly known as a desktop computer.

• Closed loop Reporting and several campaigns using the same form

  I hope that I am able to explain it properly.

  We have a webinar and a campaign of follow-up of living room. In the living room campaign, it is a simple 'personal' email to thank those who came to our booth and to invite them to the Web conference or contact us for further examination. So both the webinar and the campaign of trade show, I've added the landing page and the form for the webinar, however, when people register for the webinar, they appear in the living room campaign in Salesforce and campaign Webinar is empty.

  So based on this it seems I can only get the landing page and shape in 1 campaign so that the Common Language Runtime function properly. Can someone confirm this for me? Or should I be doing things differently?

  Thank you!

  Hey Rochelle, Yep you've stumbled upon a serious limitation by using closed loop reporting. This is what is happening. Since you sent your email show campaign, Eloqua adds dynamically the elqCampaignID of the campaign to show links in the email. So when someone clicks on the link, they are inherited from the elqCampaignId related to the trade fair. For example, this is an example of the link that is generated dynamically:

  http:// /LP = 312? elqCampaignId = 467

  In this case, the fair campaign is associated with 467 but your Webinar campaign can be linked to 468.

  The way around this problem to take the ELQ ID associated with the campaign webinar and hard-code it in the email you send. If you take

  http:// /lp = 312? elqCampaignID = 468 and hard code in your email that you send. What happens is that eloqua then dynamically add the other elqID on the tip of the tail so you get this:

  http:// /lp = 312? elqCampaignID = 468 &? elqCampaignID = 467. Fortunately, for the purposes of the CLR, it will take the first elqCampaignID he meets. Allowing you to have all of these authors attached to the correct campaign in SFDC.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• can I use the same USB cable for two printers - HP Officejet 4315 and HP Officejet 6110?

  I have an existing HP Officejet 4315 with USB cable and want to use the same cable replacement for my other printers, the HP Officejet 6110.  This allows me to change the cable between the printer and still work?

  Thank you for your thoughtful replies.

  As you asked specifically about the compatibility of the USB cable, I would say that it will work because both devices support USB 2.0 (that is, both devices can be used with the same USB cable alternating).

  Installation of the software for the two devices must be made successfully to use various functions.

• Relocation of SGD 11g using the same repository

  We Grid Control 11 1 installed on a 32-bit Windows 2008 g, this includes Middleware/Weblogic/WHO and we have a repository 11.2 on a separate server.
  
  After 18 months of operation without any problem, a few days ago we received an alert stating "application Backend WLBS or EM seems to be down", when trying to restart WHO using "emctl start SGD" we get an error:
  
  "Exception in thread"Main Thread"java.lang.NoClassDefFoundError" HTTPClient/Protocol/NotSuppException
  at oracle.sysman.emd.targetIntg.TargetInstaller.getMethod(TargetInstaller.java:553)
  ...
  
  Is it possible to remove the installation of the Middleware/WHO and re - install using the same repository?

  It seems that some jar files are missing or damaged.

  For instructions on uninstalling the WHO, please consult the following document:
  http://docs.Oracle.com/CD/E11857_01/install.111/e16847/deinstall_em_gui.htm#CHDGJFID

  If the repository is important to you, make a backup before uninstallation of the WHO.

  Kind regards
  -Loc

• How to restrict access in EDITION of APEX Applications in the same workspace

  Hello
  
  I have a workspace that consist of several say application APPL1, APPL2, APPL3,... etc...
  This workspace has access to several... say developers Developer1, Developer 2, etc...
  
  How can we restrict access in EDITION of Applications for a particular user.
  
  for exp.
  
  Developer1 should be able to access/change only the APPL1 & the APPL2. He should not be able to modify APPL3.
  same way... * Developer 2 * should be able to access/change only APPL3. He should not have editing access to APPL1 & APPL2.
  
  
  Thank you
  Deepak

  Hello

  I think that's not possible. At least I don't have to see how it could be done.

  This is why there are work spaces. You must create a workspace clean to all applications for example.
  Then of course there was maybe still problem with the analysis of access privileges to the schema if for example all 3 applications use the same scheme of analysis.
  You must assign same pattern to all areas of work, and then all of the developers of the workspace that you can change database schema objects.

  BR, Jari