Android, iPhone does not work (calls phone mode only)

I just Android where I got a simple application/widget for calls only mode for the night because I need to

Keep the emergency of grandparents and a few other numbers.

You just put it up, choose the contacts to include, and it was a simple pressure on the widget at bedtime.

They said iPhone isn't a similar option? How is that possible?

I think that you have only Favorites call with no other notifications (can someone clarify?) but I also

of many favorites for this as a viable option for me.

Someone said also you can plug headphones during the night and it must allow that phone calls (can someone clarify?)- but

It's worse than the favorite options because it allows anyone in my contacts list to call.

So is there an app or an easy way to do this?

And if not, how BB and Android figure this out and not iPhone?

We might think of the billions of dollars and great talent could not understand a work around?

There is no app for this, but do not disturb, that's what you're looking for. It does not work exactly as you describe for the other operating system, but you have a little understanding of how it works for favorites. You can set do not disturb, and it will not have any type of notification. Another option is to prevent anything but calls Favorites, while the other would be to block all calls, but turn on repeated appeals, which would then allow a second call to the same person within 3 minutes to come through. If you do not use your Favorites list because it is too large, then you will need to use repeated calls. If it's important for you, you can return to your Favorites list to see if you could reduce the list to conform to what you want at the times Do not bother or because you want to just family, possibly teach them the capability of repeated calls.

Back to Apple would go to http://www.apple.com/feedback and click on the box in this area.

Tags: iPhone

Similar Questions

  • Get the error, Drivermax does not work in Compatibility Mode

    I installed an updated driver called drivermax, but whenever I try to download the updates, it says does not work in compatibility mode, change back the settings to devices.exe. I don't know what they mean or how to do that, someone has an idea?

    Please make sure that you have installed the latest version of DriverMax, this problem should be solved. Anyway, please contact us at http://www.innovative-sol.com/contact/ and we will do our best to help you.

  • my iphone does not work 6.

    my iphone does not work 6. Noting happens.

    I try everyting.

    Hello

    Follow the instructions here, as the case may be:

    If your iPhone, iPad or iPod touch won't turn on - Apple Support

    If your iPhone, iPad or iPod touch won't charge - Apple Support

  • My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Someone help me please find a solution

    My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help

    A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today

  • Windows XP Professional does not work in normal mode. I can't find my Windows CD to repair it but. What are my options?

    Windows xp pro does not work in normal mode.  I can make it work in safe mode.  I can't find my XP cd.  I don't have the serial code and key.  How can I load xp and try to fix the problem.

    Thank you
    Mike

    original title: need windows xp pro

    Hello

    Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • Keyboard does not work in safe mode

    Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

    Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

    With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

    Kind regards

    Joel

    Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

  • After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

    After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

    PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

    I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

    I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

    I did it twice.

    Any ideas? Thank you.

    Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

    To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

    This solve your problem?

    Please send BRAVO

  • first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

    trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

    Hi willemm,

    first instance LR 6 cc import goes well with different cards, that one card does not work.

    Could you please develop the issue you are facing?

    What is the image format you import?

    USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

    I would not recommend to import gb 115 library at once.

    Kind regards

    Assani

  • iPhone 5 s microphone does not work during phone call

    Hello! My iphone 5s works really well, sensors, speaker, camera, all right. Similarly, the microphone works really well when I make a call using 'whassapp', 'line', etc and I can record video, talking to Siri, using voice memo and once more my microphone works really well. BUT! When I make call and receive phone call my microphone does not work, they do not hear my voice at all. What will happen with my microphone when you use the cell phone call? HELP ME PLEASE!

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • the last 5s Restore ipsw iPhone does not work

    Hi all

    I have to restore my iPhone 5 s. Its in DFU mode. But the latest ipsw does not work. Any idea? Any Info?

    Is this a known issue?

    Concerning

    Gottfried

    some more info:

    iTunes is up to date (12.3.2.35)

    OSx also (10.11.2)

    Error message in iTunes: error 9 unknown error

    Ipsw download is complete. iPhone tries to restart or connect. blue screen for 1 second. That the error in iTune. iPhone shows again the 'connect to iTunes' - symbol

  • Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

    Original title: restoration works not

    The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

    Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
    For example, if you use Norton/Symantec products, you will see a message like this:
    Restoration incomplete. Your computer cannot be restored...
    It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
    According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
    Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

    Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

    It works for some configurations.

  • predictive text in safari on my iphone does not work

    predictive text in safari does not work on my iphone. It used to but now his party... How should I do?

    Hello

    You can check if the search engine suggestion and suggestions of safari in active in the settings. Go to settings/Safari/Search Engine Suggestions and just below this Safari of Suggestions. Make sure that the power switch is green.

  • Satellite R10-101: touch screen does not work in tablet mode

    Hello

    I just bought a Satellite R10-101 laptop / tablet.

    The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

    When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

    The touchscreen should be enabled or that I have to get a Toshiba stylus?

    The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

    Thank you for any help or advice.

    Joe

    Post edited by: Joe Blow

    Hello

    The display panel works as a touch sensitive digitizer screen.
    You need the stylus to use the touch screen in tablet mode.

    I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

  • ENVY of HP dv6-7300ex Notebook PC: Wi - Fi does not work on battery mode

    Hello

    Good evening everyone,

    I have a problem with connecting Internet using Wi - Fi connection. When I use the battery mode, the internet connection does not work. However, when I plug the cable into electricity, it works very well without any problems. The computer shows me that I am connected to WiFi but when I try to go to some Web sites, it does not work.

    The original operating system is windows 8 and now I've upgraded to windows 10. However, the problems is not in the two operating systems.

    Thank you very much.

    Hello

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer problems with WiFi and laptop dv6-7300ex of HP ENVY staying on when the battery mode. Here is a link that shows you how to change options in Figure 19 of the link allowing the hybrid sleep.

    It shows the battery options and you can check what power plan options on this moment, you are. Balanced is always recommended with laptops.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    I hope this helps.

    Thank you.

  • The NIC failover does not work in LBT mode

    Dear community,


    We met a strange behavior in our network environment while testing our new Cisco 4500 switches x 10g. If you have a TCP Session (example JJ | netcat) data transfer between two virtual machines on different host esx failover does not work on the VM receiver if a physical connection fails.

    The test configuration is as follows:

    |    | - 4 - switch 1 vmnic - vmnic 4-|    |

    VM1 | ESX1 |                  | VSS |                    | ESX2 |-VM2

    |    | - 5 - switch 2 vmnic - vmnic 5-|    |

    More details:

    • The switches are configured as a cluster VSS. New version of the software
    • ESX1/2 are running the latest version 5.5
    • The two vmnic is active on a DV-switch in LBT mode
    • Exchanges are configured with "Port based on the physical NIC load."
    • VM1 and VM2 are invited linux, NICS are vmxnet3

    Steps to reproduce:

    1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
    2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
    3. Check which link is used (in my example vmnic5 on ESX2)
    4. Unplug the ESX2 vmnic5

    What you observe:

    • DD-traffic dies immediately
    • If you kill the dd on machines (it does not end by itself) and start all over again, it works immediately
    • If you ping VM1 VM2 or another system, it works
    • If you plugged vmnic5 again once the virtual machine is switched to new vmnic5-> if you didn't kill dd will continue

    Now to test the reverse:

    1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
    2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
    3. Check which link is used (in my example vmnic4 on ESX1)
    4. Disconnect vmnic1 ESX1

    What you observe:

    • Failover works like a charm
    • Failback works like a charm

    Conclusion:

    • Only the virtual machine at the front desk has a problem
    • Only an already established TCP session behaves badly, work of new sessions very well (as does ping, no losses)
    • If you use LACP place LBT on uplink the problem disappeared
    • Same problem if you connect two links to Switch1
    • Same problem if you use a physical box with linux and LACP as system
    • I did the same test with two c3750x (no cluster VSS) and has not encountered the problem

    Any ideas? It's really a good one.

    Thank you!

    Sascha



    Update:

    To make it clear, it doesn't have the transmission of UDP.

    Post edited by: sewert1

    I did some further testing and also involved cisco. There is no problem with the switches and network in general.

    Turns out he works with Windows clients, but it does not work with Linux. But it works with Linux with adapters e1000 and e1000e but not with vmxnet3.

    So I did some tests and learned that the vmxnet3 kernel module must be at least version 1.3. Version 1.1 (SLES 11 default) or 1.2 (default SLES12) does not work.

    (./vmware-install.pl--clobber-noyau-modules = vmxnet3)

Maybe you are looking for