Annoying problem with popups on Safari (iOS)

Similar Questions

• Problem with YouTube on Safari

  Hey guys,.

  Im having a problem with YouTube in Safari, because it displays in text mode and looks like this:

  

  I deleted the cache and cookies in safari, but no luck. Any help?

  Extension AdBlock?

  Safari > Preferences > Extensions

  To uninstall the AdBlock extension, select it and click the "Uninstall" button

• Problems with the feature 'Parked' (iOS 10 cards)

  I have upgraded to iOS 10 on my iPhone 5 yesterday. I can't get the car parked cards function to work.

  I activated the following:

  -All maps Apple Notification options

  -Location services of maps (when using). 'Always', is not available as an option.

  -System Services: Common places

  -System services: Routing and traffic

  -System services: improve maps

  My phone connects via Bluetooth to my car handsfree system. Is it not carplay.

  What I am doing wrong? Thanks in advance!

  I have the same problem with an iPhone 6. Try the general > reset > all settings, and then re-pair your phone to your car and see if it works now.

  He has not set a mine, but that is what Apple recommended.

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• Problems with mail and Safari re Adobe Flash

  I have a MacPro retinal mid 2012 and spin Yosemite 10.10.5.  Two or three days I had a popup on Safari re Adobe Flash is more [work] when I was in the middle of something. I just was I there to make it out of the way. There is an installation of Adobe Flash Player in my utility file manager, but nothing else. Since then, I've been doing almost no mail - usually get account notices and information bulletins, etc. - and Safari does not display a game that I play often. Opens its site, but the game is not. Checked preferences; they look correct. A ran DiskUtility check / repair. Two points related to the Safari have not been repaired after three attempts. Also, ran two Virus checkers. 9.1.1 Safari and Mail 8.2. There is no message re updated or on Flash - of course, I can't receive them. Anyone know if it is related to Google and what should I do about it? Help please.

  Uninstall and reinstall Adobe flash Player.

  1 uninstall Adobe Flash Player:

  Make sure that this step 2.9 is not ignored.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html

  2 reinstall Adobe Flash Player.

  https://get3.Adobe.com/flashplayer/update/OSX/

  3. allow Plug-ins

  Safari > Preferences > Security

  Internet Plug-ins > "allow plug-ins".

  Activate it.

  Search for Adware.

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• problems with popup file exe

  Original title:

  Hi, alslamu LV

  I have problem with my windows 7 is really annoying me, well there is exe file suddenly appears and quickly hide, I put emphasis on my taskbar by some of origin, I could see the image I get in programs and have to remove it but I have not found any application as it, this doesn't happen in safe mode no administrator account of the exe file, a bit like camera

  Tip:
  is it all the same to what has been covered in specific time

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  If you can determine the name of the control with its creator.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with popup LOV

  Hello
  
  I'm having a problem with a popup lov. When I click on the icon 'popup' I can choose a provider and it is stored in the field. But when I leave the form and come back later, it shows the value of return instead of the display value. For example: you select "vendor" in the pop-up list with ID 12. "Provider has" if displayed in the text field, when you save the form, it stores the ID 12 inside. But when you go back to the form, it retrieves the ID 12 and has '12' in the field of text rather than "Provider A".
  
  I tried to set the 'source' from the field popup lov as a SQL query, but that has not worked for me.
  
  No idea why this is happening?
  
  Thank you!
  
  Dennis
  
  (XE 11 g R2, apex 4.1.1.00.23)

  Hi Dennis,

  I guess that the value is not in the list because where condition, but it appears because of the "Additional display values" setting is set to Yes. See the help for this setting:
  "An element can have a value of session state that does not occur in its list of values. Specify if this list of values should display this extra session state value. If you choose not to display this additional session state value and there is no matching values in the list of values, the first value will be the value selected. »

  BR,
  Marko Goricki
  ----------------
  http://apexbyg.blogspot.com/

• Multiple annoying problems with printing!

  I'm more tired of the problems that I have all of a sudden. I just changed all the ink cartridges in my machine, but for some reason is not printing black. In addition to this I had problems with paper jams! I've never had a problem before, but now all of a sudden I'm getting jams left and right? If the above is not enough to test my patience, I now get into the tail printed after each use and removes the work so that it will pass to the next task. WTH? HP and Mac do not play well together? Of course, I went from my little one year warranty date. I tried to search the forums to see if others have the same or similar issues, but haven't found anything. Can you help me?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Problem with Cisco requested orders IOS CLI

  So I try to reload the router with EEM.  However, I want it done via the cli action statement, so I can delay the cooldown to 10.  However, I have problems with the model keyword.  Here's my applet and debugging.  It seems that the declaration of model does not meet what is asked.  I've tried several different combinations, but this one made the most sense to me.

  Event Manager applet

  event no

  message from syslog to action 1.0 "router Reload."

  command action 1.1 cli 'enable '.

  model "reload in 10" action 1.3 cli command 'yes '.

  command action 1.5 cli "confirm".

  action syslog 1.7 msg "it worked!"

  * 1 Mar 00:37:18.831: % HA_EM-6-LOG: TEST: reload router

  * 00:37:18.839 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >

  * 00:37:18.939 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.

  * 00:37:18.955 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10

  * 00:37:18.967 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: confirm

  R2 #.

  R2 #.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: % If please answer 'yes' or 'no '.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: the system configuration has changed. Save? [Yes/No]:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  The manual way:

  R2 #reload in 10

  The system configuration has changed. Save? [Yes/No]: Yes
  Building configuration...
  [OK]
  Recharge regular in 10 minutes by the console
  Reload reason: reload command
  Proceed to recharge? [confirm]
  R2 #.
  * 00:56:27.083 Mar 1: % SYS-5-SCHEDULED_RELOAD: Reload asked at 01:06:22 UTC Friday, March 1, 2002 at 00:56:22 UTC Friday, March 1, 2002 by the console. Reason for reload: reload the command.

  I tried this:

  Event Manager applet
  event no
  message from syslog to action 1.0 "router Reload."
  command action 1.1 cli 'enable '.
  Action 1.2 cli command "wr".
  model "reload in 10" action 1.3 cli command "confirm".
  action syslog 1.7 msg "it worked!"
  !
  end

  R2 #.
  R2 #.
  #event R2 Manager run TEST

  * 1 Mar 00:54:52.855: % HA_EM-6-LOG: TEST: reload router
  R2 #.
  * 00:54:52.863 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >
  * 00:54:52.963 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:52.979 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #wr
  * 1 Mar 00:54:53.895: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 00:54:53.899 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: building configuration...
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: [OK]
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:53.903 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: it worked!
  R2 #.
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  Your second approach is good, but you aren't answer the prompt.  Add:

  Action 1.8 cli command 'y '.

• Problem with popup window and url link graphic Flash

  Hello
  
  I'm having a problem with the pop-up window and the url link in flash chart and hoping someone can help me with this.
  
  Here is my select statement for the flash chart and I want to be able to click on any type of device on the table which will appear a window with a report more details of this type of device.
  
  Select ' javascript:popupURL("f?p=&APP_ID.:18:&APP_SESSION.:::P19_DEVICE_TYPE:") | DEVICE_TYPE "as link label DEVICE_TYPE, value1 COUNT (SEQ_NO)
  of PSWSC_WIRELESS
  where SURPLUS = 'NO' and
  LOCATION_AREA is not null
  DEVICE_TYPE group
  order by DEVICE_TYPE
  
  When it works, I got an error on page 19 "error: 'DEVICE_TYPE' is not defined." And no data available on page 18.
  
  I had also looked at the link below, but still does not work.
  
  http://forums.Oracle.com/forums/thread.jspa?MessageID=3854974 & #3854974
  
  I would appreciate any help from you all.
  
  Thank you very much
  MT

  What of it?

  SELECT  'javascript:popupURL("f?p=&APP_ID.:18:&APP_SESSION.::::P19_DEVICE_TYPE:'|| DEVICE_TYPE||'")' as link,
   DEVICE_TYPE label,
   COUNT(SEQ_NO) value1
    FROM PSWSC_WIRELESS
   WHERE SURPLUS = 'NO' AND
         LOCATION_AREA IS NOT NULL
   GROUP BY DEVICE_TYPE
   ORDER BY DEVICE_TYPE
  

• Problems with iphone 4S and ios 9.3.1

  I've updated my 4S 3 years yesterday at 9.3.1 - well, I wanted to do. The process has failed and the phone wanted itunes to restore connection. And that is not too much. I tried with a 10 Win and a Win 7 machine, with a new installation of itunes and USB driver and all the protection virus and firewall disabled. WTH upgrade and with a reset to the factory settings. "What combination I've tried, I finished with an error' 29 ' 2/3 down the road from the installation of the process. Apple support couldn't help me and finally told me that it is a hardware problem. But I can't believe that a phone that worked yesterday with transparent 9.3.0 and does not work today with supposed 9.3.1 a hardware problem during the night. An idea that I can do to recover the phone? Seems to be a bug in the 9.3.1 from my point of view.

  Same situation here: error 29 during the "firmware update". In my case, it turned iOS loved 9.3.1 is no longer the 3rd replacement battery part I installed two weeks earlier. I put in the (dying) original battery and the update worked.

• What is the problem with Youtube on Safari?

  Hello

  I use a Macbook Pro 2015 Yosemite 10.10.5. My 9.0.2 Safari can't load Youtube pages for some reason any. No picture, no nothing. I tested it on Chrome, and the page loads fine. But now, youtube is unusable in Safari. I have tried enough what is standard. Cleared cookies and history, deleted data from site, clear cache, stop/restart safari, restarted my mac, but nothing seems to work. All of a sudden it started to arrive a few hours ago. What is happening with Safari and youtube? I will attach a screenshot below of how youtube load on safari now. And help with this is appreciated. Thank you!

  

  I disabled my Adblock more, problem solved. Hope this will help you.

• I'm having some annoying problems with my PC, can someone help?

  It is a long story, but he's going to explain things, I hope.
  I use Windows Vista Ultimate x 64 Service Pack 2
  I had not updated my PC since the end of March, and I decided to run some updates yesterday, may 5. There were 34 items to install, and I've selected all and put them to download. They are all downloaded correctly and when installing, document 6 all about (I don't see which element it is) the screen suddenly froze and entirely turned a shade of red. Reply, no keyboard, no mouse, nothing. By force, I turned off my laptop and rebooted the PC. I said start normally, and he did, if it took a while, and then I saw "Configuring updates step 1 of 3" on the screen, normally what you would see to shut down the PC after the updates installed. I left the PC for a while while he has updated that I was doing other things, when I came back it was up and running very well. I put all other updates installed, 32 items and left. He finished, I rebooted, it starts very well and very well, and then things seemed to agree.

  The PROBLEM now is that whenever I open my 'Vidéos' folder, I get an error saying "COM Surrogate has stopped responding", and he asked me would it be close program or check online for a solution and the fence. No other option. He says

  Problem event name: APPCRASH
  Application name: DllHost.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549bbff
  Fault Module name: quartz.dll
  Fault Module Version: 6.6.6002.18158
  Timestamp of Module error: 4b195a4a
  Exception code: c0000005
  Exception offset: 000000000003bef7
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 1033
  Additional information 1: 2de2
  More information 2: 80c0e63670c525a2309f89c2c3c464ea
  3 more information: dae6
  Additional information 4: e1214622aa88f2a1f60b6531c7d37125

  report number. I could not find "quartz.dll" in a search of my hard drive to find out what is the cause. Restarting my PC did not help. Research online and closing a window telling me to check the updates, and there is not. Research/closing & closing the result in the same thing: the error comes back once more. Over and over again. No matter how many times I close, the error comes once more. And ONLY in the videos folder. If I get a subfolder of the folder videos (for example, where I store my video projects or AMV who made friends) the problem goes away, but hit the back or high or clicking on "videos" in the above address bar will restart the question. If I say NO 'close' the question will NOT report itself again. Minimize the pop-up and continuing on as normal work, but they are becoming very very annoying to deal with every time I have in this file. If anyone can help me, it would be greatly appreciated.

  In addition, I had deleted some elements in my recycling bin folder, and when I entered, windows Explorer would crash. NO INTERNET EXPLORER. He asks to restart. I rebooted, back in the trash and another incident occurred. I told him to find a solution online, then I right-click on the Recycle Bin and empty. Since then I have not been able to recreate this issue, but I guess that's part of the same show I have yet, and as such, I have listed here in case where this could help someone understand, deduce the problem or give me a short reinstalled operating system solution, which I don't REALLY want to do.

  Quartz.dll belongs to DirectX I think. You can try to install the installation of June 2010, if you have not yet.

  Usually, if Windows Explorer / computer / my computer goes down, it may be a file corrupted on the system

• Annoying problem with symbols

  When I'm in a scene, and then double-click the symbol on the stage in order to change it, it works except that the background is not grey out as it should. It's, it's more difficult to focus on my symbol which is very annoying. Help?

  Well, I'm editing. I open a file with this problem, copied frames and pasted into a new document. Problem did not exist in the new document. So I started to look for differences. Oddly, the view > preview mode seems to have an effect. When set to Full, the change in place does not diminish the rest of the film. Together in another setting, such as the anti-aliasing text, solves the problem. Obviously, this setting disables the "dim" edit-in-place capability.

  I would like to know if it works for you. I'm curious why this whole shebang has this effect. I saw other comments on this question without answers, so that makes me a learned fool (I am certainly not much less to find that).

• getURL problem with Firefox and Safari

  I use getURL to GET and SEND on a named window. The window is the parent window of the pop-up window that contains the swf file.
  
  I checked if the window is named what I think it is, (I use javascript window.name = "myname" in the main window) and I use the name of the window in the getURL.
  
  Properly applies to the GET and messages to the window called when I use IE or Opera, but Firefox and Safari spawn new windows every time, instead.
  
  Is this a known problem, and is there a work around?
  
  Suggestions would be very appreciated!
  
  Thank you!

  So, I thought about it.

  It was a security issue. If the pop-up window and the main window are not in the same domain (which was the case here), Firefox and Safari won't let not the child window target parent. Instead, it creates a new window. I don't know why this would be considered to be best in terms of security, but it's what he does.

  The solution was to make the popup has the same domain as the parent.