Another part of the earphone of cache update

Hello

This may sound stupid at first, but we are trying to update a 'region of the utility' of a cache listeners main region.

Utility area is updated from another thread. that is main regions output cache immediate headphones by handing responsibility for "Utility area" in a separate thread.

When I do a lot of cache is, my application hangs while inserting data in the utility area. In the region, is not supposed to be thread-safe?

Yes, the way you describe your puts must be thread-safe. How many members is involved here? Have you taken thread dumps, of all systems, during a shot, to see where the problem may be?

Tags: VMware

Similar Questions

  • I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

    Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

    The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

    Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

  • Cursor jumps to another part of the page or the screen when you type

    Hello

    When you type on the keyboard of my laptop cursor will go to a random part of the page or the screen and keep tapping on what I already typed.

    I had this problem with a Dell Inspiron, and they provided a patch with has been for the Bios or the touchpad.

    Is this a common fault with the Toshiba. I've seen some messages referring to disable the touchpad. However I don't think that this is a solution to the problem and Toshiba should provide a fix.

    Does not at any time have my finger on the touchpad while I was seized.

    Hope that answers.

    Huw.

    Hello

    As Christopher said use FN + F9 key combination to disable the touchpad. If the problem persists you should contact the Service partner. I'm sure they have more experience with it.

    I use two models of laptops different and same happen to me. Not often, but sometimes.

  • How can I activate Firefox redirect to another part of the site that I use regularly without asking permission

    I use a site about 2 or 3 times a week. After registration on the site, it should redirect me to another page but always request my permission to allow.
    In tools, Options where it allows me to give automatic approval to be redirected. Otherwise, I'm sitting watching the screen waiting for him to change, having not noticed ther bar at the top of the page, pending!
    Thank you

    Is there a way to allow the page redirect specific areas? For example, by using a trust list?
    There are a few sites that I use always demanding redirect, for example after the connection, but I don't want to allow redirection to any site.

  • Add the value of point two apex and display the result in another part of the apex

    Hello

    I need to make the addition of the two item values using apex.item.text and find the result in another apex.item.text.

    For example:
    SELECT
    apex_item. Text(1,null) ONE
    apex_item. Text(2,null) TWO
    apex_item. Text(3,null) RESULT
    FROM EMP
    please suggest me

    Thank you
    Sudhir

    >
    No it does not add the two values in the column, user key to enter the value, it must add the value of the item and displays the result in a dynamic way. Need a suggestion for using javascript
    >
    This requirement was not not clear in the op.

    See the demo of Denes Kubicek.

    This topic is discussed far too often. Have you tried to Oracle Application Express (APEX) and adapting one of the many examples of LoV cascading to your situation?

    See you soon,.

    PS: Tip:
    Look for the p_item_id and p_attributes of the APEX_ITEM API parameters.
    You can call JS functions for example using p_attribute

    APEX_ITEM.TEXT(...
    p_attributes => 'onchange="doTotal(this);"', /* doTotal being your JS Function */
    ...
    

    Published by: Dominic August 16, 2012 11:52

  • How to display in another part of the display of an element of LOV?

    Hi nice people.

    I have an element named TRUNC which is a static LOV. It displays this:

    display: result
    Year: YY
    Month: MM
    Day: DD
    Time: HH24
    Minute: MI

    I want to display in another element named AFF_TRUNC not the result, but the display of the element TRUNC. For example if the user choose 'Month' and sends that article appears 'months '.

    You have an idea? Is there a SQL query that might do the trick?

    Kind regards

    Christian

    Sorry! Should be more clear now.

    onChange=$x('AFF_TRUNC').innerHTML=this.options[this.selectedIndex].text
    

    CITY

  • Very much a beginner. How can I cut someone on a group photo and move them to another part of the same photo?

    I have a group photo and I would like someone from one side of it to the other. I would like to know how to select this person, cut him and stick him in a different place on the image. Is this possible? If so, how? Thank you!

    Try this

    Using Photoshop | Moving and Patch content-Aware

  • Change the content of a region according to another part of the Page even?

    Hi guys,.

    I have an application where I wish I had two regions on a page with the content of the 2nd region depend on the selection (via a link perhaps?) in the 1st region. The real app is showing colleges undergraduate of the applicant for attendance in the first region and then by displaying the coursework taken at the "institution" in region 2. Is this possible on a single page with the 2nd area of repopulation without a refresh of the page in its entirety?

    Thanks in advance.

    Phil

    Hi Phil,

    I have just set up a quick page to show what I think you're after. I would like to know if it's the kind of thing you want to say: [http://apex.oracle.com/pls/otn/f?p=56976:3] - click on any of the values of DEPTNO to see a list of employees in this Department are displayed on the right.

    Andy

  • Applying the 7.0.1 Updater PS copy legitimate AMENDMENTS of Photoshop Version 7 for Win - No Go!

    Yesterday I received from a seller on eBay 100% positive feedback, which seems to be a new copy of old stock perfectly legitimate Installer Windows 7 Photoshop on CD-ROM. spotlessly clean, with a hologram on case Adobe sticker, another sticker saying "Automatic Activation" and the serial number printed on a sticker on the back. I advanced and installed PS7 on my new laptop Hewlett Packard HP 250 with 8 GB RAM and 1 TB of storage Windows Edition running family 10 without any problem. It seems to be stable and works real nice and fast. I should point out that I've worked with a registered copy of PS5.5's "Shrink Wrap" for nearly 17 years on a Mac G4 with no problem at all.

    So I downloaded and ran the Photoshop 7.0.1 updater and got a message saying that it 'impossible to find the Adobe Photoshop 7 folder in the Program Files x 86 folder.

    Well, he found the file, but it wouldn't work--no go and no show. Another part of the message says "" If the installation program does not work, then uninstall Photoshop and reinstall it from the CD-ROM, and then run again PS 7.0.1 updater '. " Dutifully, I did all this and the same thing happens again anywhere.

    I googled the problem and to my great astonishment found that it is a known problem. It turns out that this way back in 2002 Adobe got so fedup with PS7 be hacked that they incorporated to a data base of dubious serial numbers known in the PS7.0.1 update to thwart the pirates following the path of upgrading to scuttle the update process. Unfortunately, Adobe has also included a large number of legitimate serial numbers, and it may very well be that my copy of Photoshop 7 is one of them!

    Could someone tell me what I need to do to get the update to work, and it is possible to save a copy of Photoshop now 14 years? If my copy of Photoshop is legitimate (and I see no reason to think otherwise) if I can get a new serial number?

    First of all, Adobe no longer supports this really old version, so there is no way to get a new serial number

    Given that Adobe can't stand this version, you're stuck with installation and updating

  • How can I insert a reference to another part of a document?

    Hello people, I want to add one reference to another part of the document, for example a reference to a previous chapter.

    I think it won't be easy but I am a new user of pages.

    Thanks in advance.

    There is no support for bookmarks in any publication pages v5, and consequently, intra-references (hyperlinks) are not possible.

    Bookmarks are available in Pages ' 09 v4.3. Discontinued by Apple in 2013, he continues to work on El Capitan 10.11.5.

  • I need to replace a color on my image with a specific part of the image color.  How do I?

    I spent over 2 hours trying to figure out how to replace a color on a part of my image with a specific color indicated on another part of the image.  So far, I was able to go to "Replace color" on my version of Adobe Photoshop, but it seems that I can only change the hue and brightness of the color that it is currently.  I need to use a specific color, so this didn't help me.  Does anyone know how to complete the task that I refer to?

    In addition, please keep in mind that I use Adobe Photoshop 6.0, not a fancy cs version or whatever it is.  So it's fairly old school...

    Any help/comments are greatly appreciated!  Thank you.

    Hello

    In fact, you can choose a specific color using the replace color function!

    Go to Image > adjustments >, replace color

    Select the color you want to replace. Then, click on the 'Result' box in the section of replacement (see below)

    A color picker dialog box opens, where you can use the eyedropper tool to select a specific color in your image, or you can enter the specific RGB/CMYK values.

    Please post again if you have any other questions - I use CS6, but as far as I know, this process works the same for PS 6.0.

    Good luck!

  • How to make the two direct DBS update and write through the same cache?

    Hello
    Sorry for any fault of grammar since English is not my first language.
    Our team is planning to migrate a project centered on the DB to the solution of database consistency. A problem that we face is that a large part of the business logic was implemented in DB stored procedures, which would take the time and effort to rewrite in the entity of consistency model. To for this transition process harmonious and progressive, is there a way to support the two BD update and write through on the same cache? In other words, I want that stored procedures will continue to manage the demand for legacy, after the update, update the web service (update) or (expel/get) the cache; While new logic of business on the same Entity (Cahce), I want to reach write-through. Is it achievable? Thank you!

    Hello

    So what you're really asking is a way to ensure that updates made directly to the DB of your existing system are pushed in cache coherence.

    It is a common problem with a number of possible solutions according to your specific needs.

    If you do not need data in cache, in other words, don't mind if it's a bit outdated, then you can use the expiry and refresh to come so that consistency will expire entries the cache and reading in that the DB to the need to hide.

    If you need accurate data in the cache, it is when it changes on the DB you had to push as soon as possible in the cache, then you need another way. It depends probably the DB that you use and what functionality it provides to allow you to hang change tables.

    The SIG London yesterday there was a presentation on the Oracle Golden Gate to do this kind of thing. I think that it is based on the use of the APP and of course an Oracle DB.

    JK

  • When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    Windows Media Player is not a Publisher.

    You can use Windows Movie Maker to split
    and combine audio files, but it works better
    If they are in the. WMA format.

    Also the free Audacity software may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Audacity

    http://Audacity.sourceforge.NET/

    How to split a long recording into multiple files or CD tracks?
    http://Audacity.sourceforge.NET/Help/FAQ?s=files&i=split

    How to combine two files into one longer file?
    http://Audacity.sourceforge.NET/Help/FAQ?s=editing&i=join

    How to mix songs with Audacity
    http://www.ehow.com/how_5061510_mix-songs-audacity.html

  • Update XCode is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

    When I try to update Xcode the following error message will be display... Looking for the solution...

    Hello

    "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled"

    Applications installed on your Mac are updates available or accepted from the Mac App store, but you have purchased using an Apple who is not currently signed in ID. Log in with the Apple that you used initially to buy apps ID. If you don't know what Apple ID was used, check to see if someone else who uses your Mac has accepted these applications.

    Information above is taken from this Apple support article > Accept bundled apps using the Mac App Store - Apple supported

  • Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

    Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

     Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
    

    Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

Maybe you are looking for