Another question regarding error management

Similar Questions

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3

• Questions regarding the management of windows server data.

  my master wants me to describe me the entire windows server 2012 secondary storage system, but as I've mentioned in this regard him now he wants me to write about data for windows server management. can someone expalain me a little on this subject and where can I find information about it.

  SF

  I suspect that your teacher wants you to discover by yourself by reading (or Googling) it.

  On another note server should consider the Technet site
  (http://social.technet.microsoft.com/Forums/en-us/home)

• Another Question regarding the IPC in the BB platform (secure process for RuntimeStore)

  In my scenario,.

  Process one will constantly be voicemails from somewhere and put it in a table in a RuntimeStore, named _store.

  B process, there is a thread T will waitFor the ID of the table in the _store. If succeeds, then copy to another location, i.e.,.

  persisting an object and then eaten after this, the thread will remove the ID of the table in the _store.

  I wonder if it is safe for both processes simultaneously access the _store.

  Wrote in the store. B is read and write to the store.

  If someone could help?  Very well appreciated.

  I am a bear with very little brain and can never remember the right way of doing things.  I'm sure that someone will take the holes in what follows and suggest the best ways and it would be fantastic.

  I think there are two issues here:

  (a) simultaneous access

  (b) persistence

  (a) the simultaneous access to an object in the persistent store are no different from any object, they are located in PersistentStore, RuntimeStore or RAM.

  Thus, for example, let's say we have a vector in PersistentStore, we use just like a queue to a single server (then only add to the tail and remove the head), with a separate 'lock' in RuntimeStore object.  Synchronize us on the lock object before we add an element, or remove an item, our access is perfectly safe

  (b) persistence

  Yes I agree, this aspect is not clear.  I always thought I want to commit an object placed partially updated, so in this example, would make the validation in the context of add or remove the treatment.

  Of course, things become a little more complicated if you start to talk about data updated in the queue, but I do not think that these problems are related to PersistentStore as a result, I think that these are issues of a general nature and there is probably many places on the web where are discussed different mechanisms to make sure that it works well.

  A few other points:

  (1) I understand that the treatment of validation is "atomic" on the BlackBerry and the "wound", so if you make an object you will persist all changes to this object. Usually, I maintain a collection that is associated with an Application for validation, points specific in the treatment of requests to ensure that the data associated with an application conform to the battery be fired immediately after a commit.

  (2) you can see updates of persistent objects, even if they are not posted.  These changes will be lost if they are not posted. So if you have a line like the one above, and two Clients add entries in the queue without committing, the server see the two entries in the queue until the battery is removed.  When the server restarts, the two went.

  Does that answer the question?

• Yet another question of color management

  Hi people,

  I have read several of the very detailed color management messages/discussions here already but that you did not find the answer I'm looking for. So I hope that some experts might be able to save me time and the entry...

  I'm under a Windows 7 (32-bit) environment with a Dell screen Ultrasharp u2711 attached. I left the monitor prepare to close on 30 minutes and ran an 'Easy' calibration with Lacie's eye - one device using the Gretag Macbeth 3.6 software. (I guess I could have used the calibration of the "Advanced" option but thought that I would allow me to save time and has always been pleased with the results on my older Sony CRT).

  I'm under LR3.2 and CS4. Viewing images in LR RAW skin tones are much too saturated, but when I export images as sRGB JPEGs results seem very nice when displayed in the (much less saturated) Windows Photo Viewer. If I open the same image in Internet Explorer, it is identical to the way she looks in LR. (I haven't installed so have not compared to Firefox). If I open the image in CS4 by default it has the same appearance it does in Windows, but if I change the format of RGB monitor test it corresponds to what I see in LR and IE.

  I guess it is somehow related to the new wider gamut range that the monitor can display (compare to my previous CRTs). I read in one of the messages of Jao that LR is always right and other unmanaged applications will do weird things on high range screens. IE is not color managed then why it display very similar colors to what I see in LR, when the standard Windows image viewer displays much less saturated color (which seems to be the opposite of what others are experiencing)?

  I usually always export to JPEG sRBG images usually go online, but this series is going to a customer who will be most likely took to printing and viewing on a PC.

  Looking forward to your comments on this.

  Kind regards

  Chris

  Can anyone confirm 100% if the Windows in Windows 7 Photo Viewer is color managed?

  This is the case.

  Check out this thread on the calibration range as your monitors. Adobe RGB is perhaps not the best starting point, and certainly the luminance to any monitor that is used for the treatment of the image must use 120cd/m2 as an absolute maximum. The best results will be obtained my ambient light control (monitor hoods etc) in order to use around 100 cd/m2 luminance values or less. A decent calibration device should be able to measure the ambient light and the recommendation on the lowest luminance setting allows you to calibrate.

• Another Question regarding totals

  How I would count only when the value is not null in the current group?
  
  <? Count (Current - Group () / Group)? >
  
  TIA
  
  Rose

  ;)

  will be taken into account number of items in the current group, which are not null

• Another question about Dates

  Hi, I have another question regarding the use of the field date in Adobe Designer 8.  I have the updated domain in place so that the person can enter the date, lets say, 12/12/11 and it will convert to December 12, 2011, or, the user can click on the calendar that is attached to the date field and make a date selection.  My question is this.  Is there a way that can not only the calendar go to any date by selecting < or >, but can also go to an exercise < < or > >?  We have contracts that extend from 2 to 3 years and want this option to be available.

  Thanks for any help you can provide.

  Here is how I currently have my date fields in place.

  In the field section:

  View model: MMMM D, YYYY

  Edit pattern: M-D-AA

  Section of the value:

  MMMM D, YYYY

  Date must be entered as per example, 12 January 2012

  Liaison section:

  MMMM D, YYYY

  The calendar widget allows you to select other years.

  When you open the calendar, click on the name of the month, the calendar will show you every month of the current year.

  When you then click on the year, it shows you all the years of the current decade.

  

• I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send.

  / * moved from answers Feedback * /.
   
  I have a question regarding windows mail. I was send and receive mail with no problems until last Thursday. I can still receive mail, but I can not send. My email is with bellsouth.net and comes in my computer through windows Messaging.  I spent an hour and a half on the phone with bellsouth, and they say that the problem is with my windows mail.  I tried to use a restore date, and that did not help either. I will post a copy of this message, as I keep getting.  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object 't', counts: 'mail.bellsouth.net', server: 'mail.bellsouth.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC0F thanks for any help.

  Sometimes, WinMail settings get screwed up and you must remove the account and then add it back back.  Make sure first that the antivirus software not interfere (see www.oehelp.com/OETips.aspx#3).   Delete your account completely, then close WinMail.  Then compact and repair the database of WinMail (see www.oehelp.com/WMUtil/).  Add your account to mail back once again, and then make sure you have the correct settings under Tools | Accounts | Mail | Properties | Servers and | Advanced to what AT & T Specifies to WinMail (or OE).  Then see if it works.

  Steve

• EqualLogic group member network configuration error: "management interface should not be on the san subnet.

  Hello

  We currently have new EqualLogic 6100 device with this network configuration:

  Director of the IP - 192.168.0.2 (VLAN1).

  Member network config:
  eth0 - 192.168.0.3 (VLAN1)
  eth1 - 10.10.10.3 (VLAN2)
  eth2 - 10.10.10.4 (VLAN2)
  eth3 - 10.10.10.5 (VLAN2)
  ETH4 - empty

  I would attribute 192.168.0.4 to eth4, but received the error: "management interface should not be on the san subnet.

  I am sure that all interfaces eth has access to the VLAN1 and VLAN2, mean error indicates that eth4 should not access VLAN2 and only access the VLAN1 on the switch?

  Or eth0 should also have access to the VLAN2 only to reconfigure eth0 and eth4?

  Thank you

  > The group eating IP should be in iscsi VLANS?

  Yes!

  Note: If configure you an EQL it will ask an iSCSI port because nothing is more necessary to bring it up. The doest previous EQLs have a dedicated Mgmt Port and later, you can convert the last ethX as a MGMT port. This is the reason why configure you ISCSI at the beginning. (Think of a mixed group of newer and older models, and you get a picture)

  OK... once again it is the one and only member of the Group and there is making the production host connected to the right?

  The change of IP address, to a 3rd. subnet for temporary use.

  -Do not touch eth0-3 and the IP address of the group now

  -Configure the MGMT port and IP address management in the tempr group. Subnet. Use the Config-> Adv. Group-> network MGMT. You can change the MGMT Port of the Member, and the address IP of MGMT

  -For the registration of the configuration, you will lose access. You must place your admin PC in the templ. subnet so

  -Connect to the GroupMgr with temp again. INTELLECTUAL PROPERTY

  -Now you can change the IP address of group 10.10.10..x

  -Now you can change eth0 10.10.10.2

  -At the end, you can change the address IP of the Group MANAGEMENT, as well as the MGMT Port to 192.168.0.x

  -Change the IP address of your admin PC rear

  A failover, you should consider to hang a serial cable the active controller of the EQL. Use 9600,8,1, N with your favorite terminal program (putty.exe on windows). All the steps, you can perform from the command line.

  If this group and the only member not in production, but you can reset the config and restart from the beginning.

  Kind regards

  Joerg

• Can not complete the configuration of the HA agent on the host. Another HA configuration error

  Dear team,

  
  I am facing a problem when setting up the AP on a single server. Scenario is the following:-

  
  Six months back I install the VMWare solution for our Organization. ESXi 4.1 is. At this time there were two servers in the cluster, and both have been configured with HA successfully.

  Now, I have a server added more in the Cluster, but when I'm trying to configure the AP on the same system, it gives the error "cannot complete the configuration for HA agent on the host computer.". Another HA configuration error. "(Screenshot attached) so many times I click with the right button on the server and select reconfigure VMware HA but failed.

  
  Could someone help me please. It is a live system and the knot very critical. If need help on an urgent basis.

  
  But in addition, we also bought a 1 year (TS) technical support for our prodcut. Could someone please guide me how can I get a ticket for it.

  Thank you and best regards,

  Gaurav Asthana

  
  

  Hi all

  Thank you for your kind support. My problem is solved and it is very simple. By turn off and turn on again the HA on the Cluster setting, the problem is solved. All servers are now configured HA.

  Thank you again...

  Gerard

• That errro again... host currently has no error management network redundancy

  I don't get the "host currently has no error management network redundancy.

  I think that I have the correct configuration, but not sure since our network guys gave me the IP addresses to use for HA.

  Here is the config for HA

  ESX Server 6.

  Service console is on 0 to 172.16.1.106 in 255.255.0.0 vSwitch

  The second redundancy console) is on vSwitch 4 to 77.77.77.10 in 255.255.255.0.

  ESX Server 5.

  Service console is on vSwitch 4 to 172.16.1.105 in 255.255.0.0

  The second redundancy console) is on vSwitch 4 to 77.77.77.9 in 255.255.255.0.

  I've reconfigured HA on ESX Server 6 and ESX Server 5 and even restarted them but still not the mistake of redundancy...

  Something is not properly configured?

  stanj wrote:

  If the collection of network adapters offer the same functions of redundancy, so why so many articles point to using a second console HA redundancy?

  It's simply the options given. There are several ways to provide a redundancy of HA heartbeat.

  The article also indicates HA advanced features such as das.isolationaddress2 and das.failuredetectiontime will be charged when you set up a secondary service console. It is an approach more effective, but still more complicated?

  These advanced options are not always available and also provide another way to configure HA redunancy.

  Here's something interesting to look at as well

  http://www.yellow-bricks.com/VMware-high-availability-deepdiv/

  For me, I always learned the KISS method (Keep it Simple stupid).  Add a second NETWORK card is the easiest way to keep your redundant environment, in my opinion

• A few questions regarding the audit

  Hi all
  
  
  
  Greetings. I have a few questions regarding the audit.
  
  
  1. how to enable auditing for create table and truncate table by a user?
  
  

  SQL> audit table by schema_name;
  
  Audit succeeded.

  Fact the knowledge of the above: http://psoug.org/reference/auditing.html
  
  This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;
  
  
  Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?
  
  
  2. How can I check what all auditing has been activated so far?
  
  
  Please suggest me. I am unable to follow the audit to create and truncate.
  
  
  Concerning
  KK

  In the above article that I mentioned earlier it said check the dba_audit_trail table.

  COLUMN username FORMAT A10
  COLUMN owner    FORMAT A10
  COLUMN obj_name FORMAT A10
  COLUMN extended_timestamp FORMAT A35
  
  SELECT username,
         extended_timestamp,
         owner,
         obj_name,
         action_name
  FROM   dba_audit_trail
  WHERE  owner = 'AUDIT_TEST'
  ORDER BY timestamp;
  
  USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
  ---------- ----------------------------------- ---------- ---------- ----------------------------
  AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00  AUDIT_TEST TEST_TAB   CREATE TABLE
  AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00  AUDIT_TEST TEST_TAB   INSERT
  AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00  AUDIT_TEST TEST_TAB   UPDATE
  AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00  AUDIT_TEST TEST_TAB   SELECT
  AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00  AUDIT_TEST TEST_TAB   DELETE
  AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00  AUDIT_TEST TEST_TAB   DROP TABLE
  
  6 rows selected.
  
  SQL>
  

  Have you reviewed this table?

  Alternatively, you can consult the table of dba_stmt_audit_opts.
  DBA_STMT_AUDIT_OPTS

  Published by: Kerri_Robberts on July 15, 2011 15:11

• Another Question... Pasted the first album... but does not work properly

  Hello-

  Another question - I stuck my first file (wpa without loss) from the album on my rocket and when I go to him, he travels only (so 1,2,3, etc. and then it again.)  The songs look like they have any length, if that makes sense.  The bottom bar is from 0:00 0:00.  The strange thing is the player will play all music pre-loaded there, and when I tried to copy a song the player on the computer off, he played.  It is therefore not the file of the song itself I guess.

  What I've done wrong? And how to fix it?

  Thank you very much!!  This forum is very useful for a beginner!

  WMA Lossless is not a supported audio format. Which means that it won't work. You will need to re-Ripper in plain ' ol .wma, .mp3, .ogg or .flac format.

• Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if the make

  Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating!  I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!

  You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?

• Another question CFIMAGE

  Hello, everyone.

  I have the action = "writeToBrowser" CFIMAGE works now, I just have a question regarding this project.

  How to resize the image?

  Here's what I have so far:

  <cfinvoke component="components.announce" method="getFile" returnvariable="getFile">
    <cfinvokeargument name="docID" value="#qry.DocumentID#">
  </cfinvoke>
  <p><div style="float:left;"><cfimage action="writeToBrowser" source="#getFile#"></div>#some text#</p>
  

  The image is 290 x 160, and I care about her, a bit.  How I do that?

  Thank you

  ^_^

  Have you tried the ImageResize function?