Anti-phishing/malware blocking is enabled, but the test of Firefox phishing sites are not blocked.

Similar Questions

• Changes made to the screw driver in the Interface of Simulation Toolkit (SIT) are not translated

  Hello

  I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

  Could someone help me with this please.

  Eliane.

  Hi Bill,

  Thank you very much for looking into this. Solved the problem.

  The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

  Thanks again.

  Eliane.

• How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

  How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

  Moving to the Director

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  When I install weblogic and eppm works in client machine only 10 minutes after does not always work in Server

  Thanks for the reply,

  I solved that

  Eppm proxy server is enabled, so I remove the proxy in internet option, it works very well in all the URLs of web client machine p6

• When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  Sorry try again - your post does not calculate

  They are all in the photo library, but I don't know why they are not in pictures

  What version of the operating system and Photos you have? Explain what exactly you're actually seeing and what has changed since it worked

  LN

• I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

  Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

  I checked with another browser and websites I went to work and are displayed in the browser.

  
  

• Hi, I am trying to download https anywhere on my asus memo tablet. I downloaded the brouser firefox but the https everywhere said that it does not load?

  Memo ASUS Tablet - firefox loaded today but the protocol https anytime download says can not load om my version of firefox, can advise you. Thank you

  Hello Paulsp8, have you tried the firefox for the android version of https://www.eff.org/https-everywhere? otherwise please contact the developer of the addon for support, thank you!

• My internet speed is good, but the download of firefox is very slow. Why?

  I have a WiFi internet connection shared with 54.0 Mbps speed. Internet high speed is good, but the installer of Firefox download Firefox at very slow speed. It takes about 10 to 15 minutes in the Firefox download. Please correct the problem if it occurs through your side, else do tell me what can I do to feel better. Thank you.

  Full Setup (for Windows) can be found at mozilla.org -> systems & languages under the Green download button link.

• Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help?

  Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.

  More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Windows media player plays most audio file but the 0r 5 last 10 seconds are crackling

  Windows media player plays most audio file but the 0r 5 last 10 seconds are crunchy, why?

  The following article might be worth a visit:

  Windows Vista - How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.