Anti-replay window size

Hello
We would like to increase the size of the protection window anti-replay on our routers ISR connected to ASR using DMVPN. On the SERP, I can use up to 1024, but ASR only limited to 512.
I wonder if I can set up two sizes of different windows on SRI - 1024 and ASR - 512, connected to each other via DMVPN, without implications/issues. (I think 512 should be sufficient for the side of the ASR but SRI would need more).

Thank you!

Yes you can have sizes of separate windows anit-replay - the check is local and is only done in the inbound direction.

Now what you might want to remember that allows this feature implies not existing connections will begin using the new windows immediately.

Tags: Cisco Security

Similar Questions

  • How can I change "window size" in the trim of 10%?

    I use Firefox 32.0.3 and I need to know how to change "window size". I have a + and a - in the toolbar but it only changes the size of the window in increments of 10%. How can I get and intermediaries to increase the changes... i. e 15% or 18% or similar?
    Any help will be appreciated.

    That's the zoom buttons enlarge and reduce the size of the content?

    By default, the enlargement options:

    1.1 => 110%
    1.2 => 120%
    1.33 => 133%
    1.5 => 150%
    1.7 => 170%
    2 => 200%
    2.4 => 240%
    3 => 300%
    

    The default mitigation measures are:

    .9 => 90%
    .8 => 80%
    .67 => 67%
    .5 => 50%
    .3 => 30%
    

    To add or change these steps, you can modify the list in Firefox about: config preferences editor. Here's how:

    (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (2) in the search box that appears above the list, type or paste the zoom and make a break while the list is filtered

    (3) double-click the preference toolkit.zoomManager.zoomValues and edit it as you wish. Since it's a little difficult to read, you can copy it to a word processor or another program where you can zoom text, modify it, and then copy the revised version.

    Note #1: After having OK'ing this change, it will come into force in any new windows that you open. Existing windows/tabs seem to remember the implementation at the time you opened the. (To move a tab into a new window, click on the tab on the tab bar > move to the new window.)

    #2 Note: If the preference becomes a mess, you can right click > reset to restore the default value.

  • Difficulty maintaining the application maximum window size.

    I close a window of the application to its maximum size, but when I restart this application it opens in a small window, I then need to maximize. How can I configure windows to reopen the (maximum) size, they were closed? Thanks for any help/tips you can offer me.

    Either to set the properties of the shortcut to open the program "Enlarged" or, extend the application windowed in question to as large as you want, and then close. A windowed application will reopen last windowed size, it's in before it closes.

  • My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

    My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

    Hello

    ·        You did it changes on your machine before this problem?

    ·        You have a LCD or TFT monitor?

    Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

    You can also follow these links for the resolution of the monitor & check if it helps.

    Change the resolution of your monitor

    To change your screen resolution

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem w / window size is smaller than the size of the screen

    I recently had an automatic installation of Vista sp.  Don't know what version/sp.  After restarting my laptop, the window size is now smaller than the window size of the screen.  It looks like HD video with a 1 1/2 in. vertical black band on the left and right side of the screen.  How can I fix it?

    Hello

    Have you tried to adjust the resolution in the settings of the Control Panel/customize / display? If there is only limited adjustments available, you will probably need to reinstall or update your graphics card driver. This is best done with a download of the manufacturer of the device, not windows update. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • RWIN / TCP problem window size

    Hello.

    I have a problem with Windows Vista Ultimate x 64 - whenever I have try to download anything through IE, Opera and FireFox I get a download speed of a few KB of 30-50, even though I have a 5 Mbit ADSL connection.

    Now, I tried also test my download speed on torrents and with managers of download and when I use these I get my full download speed (~ 500 KB)-this is because when I download via torrent or download managers, I have multiple connections to the file so I can get full speed.

    So the problem is that I have a strange connection download speed limit (and browsers use only one socket when downloading files). I guess that the melody of Vista Auto is not changing my RWIN or TCP window size, so I need a way to manually change this somehow.

    I also tried to turn the auto tuning to restricted and the disabled, but it did not help. Also, when I put it to the test, I have no internet at all.

    P.S. I use my Intel DP35DP motherboard integerated network adapter.

    Hi SeW800,

    We will try a few things here.  First of all, check Intel site and make sure all the drivers for the motherboard and BIOS are up-to-date.

    WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

    Once everything is up to date, you might want to try to enable and disable these settings to see if it will work better:

    Provider of Congestion Vista - for TCP connections with a large receive window size and a band bandwidth-delay product, Compound TCP (CTCP) in the TCP/IP stack new generation greatly increases the amount of data sent at a time by monitoring the bandwidth product / time, variations in delay and packet losses. CTCP also ensures that its behavior does not negatively affect other TCP connections. In testing performed internally at Microsoft, large file backup times have been reduced nearly in half for a 1 Gigabit per second connection with a 50 milliseconds round-trip time. Connections with bandwidth product / more time can have even better performance.

    Activate - netsh interface tcp set global congestionprovider = ctcp
    Disable - netsh interface tcp set global congestionprovider = none

    netsh interface tcp set global ecncapability = toggle
    netsh interface tcp set global congestionprovider = ctcp / no
    netsh interface tcp set global rss = toggle
    netsh interface tcp set global autotuninglevel = normal
    netsh interface tcp set global chimney = toggle

    Thank you

    Kevin
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Win guard resizing a program window whenever that program is open (Outlook for example). Can I do remember window size?

    Win7 remembers my Firefox window size, but no other programs like Outlook

    Hi all

    Hold resize CTRL of your window and close the window.

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Window sizes host display does not restore after a remote desktop connection

    After that my computer has been accessed via a remote desktop connection, the window size for my program do not restore their previous size.  I have monitors of landscape which are larger than most of the remote users.  When they log off my computer, my window sizes are stuck to the size of the monitor of the remote user.  Y at - it a setting or a way to get my windows to restore to their original size?

    No, there is no setting for this.  It's just the way it's always been since Remote Desktop was invented (formerly in the 1990s as Microsoft Terminal Services Client or MSTSC).

    At the heart of the problem is that the programs that run on the desktop have no way of knowing that the display size has changed, and even if they did, they also can't know what was their previous size.  It is not just stored.

  • How to increase the default window size?

    Original title: default window size

    My windows 7 opens too small windows.  Can not know how to make default to a larger size.

    Hi archievee.

    Do not use Maximize. Take the corners of the window and drag it to the format full screen. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window.

    If this does not work, try this.

    Right-click on the icon and select Properties. Under the run drop-down list, select Maximized.

    I hope this helps.

  • The Photoshop window size is too large

    How can I make my window size of smaller Photoshop? Currently, whenever I open the window is so large, I can't access anything whatsoever at the bottom of the window, including the clamp and do drag the lower right window of PS. Help, please!

    You need to just click the Green zoom button to adjust to photoshop for your screen.

  • How do I re-Lr window size?

    I'm new to Lightroom - transition during opening. I am running Yosemite on an older iMac 24 "(début 2008)."

    How do I re-Lr window size? At the present time, it appears to be locked to the original format. Note that this is NOT full screen, which I can always enable/disable using < F >.

    SHIFT + F will switch between the different screen modes.

  • Adobe Media Encoder Export Settings window size problem

    Any help on this would be appreciated: I use a MacBook pro, osx 10.6, CS4 Web Premium. I used to have a connected external monitor, which had a much higher resolution, so when you use Adobe Media Encoder I have to click the button settings on a video to get the export settings window, then stretched from the window of export settings for the size of my external screen. Now, I use my laptop computer, and export settings window does not resize top buttons left to adjust it to the size of my laptop and the low third export settings window get cut so I do not see the ok/Cancel buttons etc.

    I tried re-installing media encoder (via reinstalled flash using CDs) to try to 'reset' the window sizes, does not solve the problem.

    If anyone knows of any other preferences or something that I could remove to solve this problem, I can be grateful.

    Yes, I received the same answer. This means that adobe don't use OS native windows (shame on them!). I just tried something with CS4 that worked, however. Try this:

    Stop Media encode

    Go to UserHomeDirectory > library > Preferences > Adobe > Adobe Media Encoder 4.0 > and delete the file called "AMEPrefs.xml" and "AppPrefs.xml".

    Then restart Media Encoder. For me, this reset the window size and placement. I tried to move the window of export settings down to half of it was above the bottom of the screen. Once I deleted those files and rebooted, the window was smaller and repositioned.

    If this does not work, try to download the demo of this product:

    http://irradiatedsoftware.com/sizeup/

    It is said that Adobe programs are programs of "disorder", they won't probably resize, but they should at least move. If nothing else, maybe you can move the window value is negative (upwards) so that the resize handle is visible, then move it down so that the header bar is visible again...

  • Popup window size problem

    Hello

    For some reason, in my Flash site popup window link opens a popup that does not go to the window size rules that I set.

    The site is www.caveataudiens.net, click on the button "music" and then the button on the Jukebox to see as an example.

    The Jukebox button has the following actionscript code:

    on (release) {}
    customize the window that is open
    0 is equal to n
    1 is equal to YES.
    address = "" http://www.caveataudiens.net/music/mp3player.html "; "
    target_winName = 'James ';
    Width = 400;
    height = 300;
    Toolbar = 0;
    location = 0;
    directories = 0;
    status = 0;
    MenuBar = 0;
    ScrollBars = 1;
    Resizable = 0;
    sends data to the function of
    openWinCentre (address, target_winName, width, height, toolbar, location, directories, status, menubar, scrollbars, resizable);
    }



    and I have in my main actionscript layer:

    stopAllSounds();

    forum_btn.onRelease = function() {}
    getURL (" http://www.flaccidsacks.co.uk/phpBB2/", "_blank");

    }

    music_btn.onRelease = function() {}
    gotoAndStop ("music");
    }

    links_btn.onRelease = function() {}
    gotoAndStop ("links");
    }

    about_btn.onRelease = function() {}
    gotoAndStop ("about");
    }

    news_btn.onRelease = function() {}
    gotoAndStop ("news");

    }

    Movieclip.prototype.openWinCentre = function (url, winName, w, h, toolbar, location, directories, status, bar menus, scrollbars, resizable) {}
    getURL ("javascript:var myWin;") If (! myWin | myWin.closed) {myWin = window.open ("'" url + "','" + winName + "','" + 'width =' + w + ', height =' + h + ', toolbar =' + tools + ', location =' bar + place + ', directories =' + directory + ', status =' + status + ', menubar =' + bar menus + ', scrollbars =' + bars scroll + ' resizable = "+ resizable +", top ='+ ((screen.height/2)-("+ h/2 +")) + ', left =' + ((screen.width/2)-("+ w/2 +")) + "" "+" ' ")} else {myWin.focus ;};) ("void (0);");
    }

    A kind soul can help me understand how to adjust the size of the window?

    Thank you very much

    Lyle



    Thanks, this works very well.

  • Initial window size too much HTML (.chm) help

    I was wondering if anyone knows how this problem - my .chm initially opens in a window that takes my entire screen (sometimes its opening as a stand-alone .chm and when you access the application with which comes the .chm). The initial window size is much too big, forcing me (and end users) to reduce the window manually (I have to shrink even just to see the Add button under the Favorites tab). I checked all the settings window in the pod project... windows sizes are smaller than what the .chm initially displays and I see all of the options I selected or not selected that would what be it (I tried a few things that you can imagine).

    Any suggestions would be greatly appreciated!
    Thank you
    Amy

    Hi Rick, and Pete

    I have some good info to work with thanks to your messages. I was not aware of the hh.dat file or its purpose.

    Thank you very much
    Amy

  • Window size

    I have by mistake is the size of the window on Firefox bigger than my computer screen. Now I can't figure out how to restore it. Please help me.

    Try to open the system menu via Alt + space and use move and resize the elements to fit the window again.

    You can try to rename (or delete) the file xulstore.json in the Firefox profile folder if it does not work.

    • C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.

    "AppData" (XP: Application data;) Mac: ~ / library. Linux: ~/.mozilla) is a hidden folder.

Maybe you are looking for