Any ideas why PE7 will not manage Pentax Optio w60, avi?

I am able to work with the files video avi on all my other software programs editing but PE7 is my favorite. For some reason any when I import the avi from my SD card files / Pemtax Optio W60 camera I can hear audio in the edit window... no video.

I'm not 100% on that, but I've seen some comments on the forum Pentax that says Pentax AVI video uses NO compression DiVX or XvID... it is registered with the DV codec. I am not sure that is the codec used on this model... or what it means anyway.

I would be recognizing all of the information, suggestions and recommendations to solve this problem.

There are two good CODEC MJPEG who work with the Nikon D-90 hardware and will change in PrPro. The MainConcept and Morgan have done well. Don't know how well PE will manage, but otherwise well, advice from Steve he will get PE in DV - AVI Type II format.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • Any ideas why it does not work?

    I appreciate all the help provided by this Council. I learned a ton from coming here as I continue to develop my SQL knowledge.


    I have this request need to look on the Work_order table and pull out all the lines that have been closed during the previous day. So I need that it resembles the table Stock_Tran and tire and lines which had a Date_Trans during the previous day. Who will give me the work done and the work that was partially completed during the previous day.

    I get an error on line, I have highlighted and bolded work_order.partno is an invalid identifier (I'm sure that's not the only mistake). The query worked until I started to add the table Stock_Tran.

    Any ideas would be greatly appreciated!



    SELECT
    SITECODE
    , WORK_ORDER_NUMBER AS "WO #
    partno,
    , WO_PRIORITY AS 'PRIORITY '.
    QTY_WORK_ORDER
    QTY_FINISHED
    , TRUNC (WO_RELEASE_DATE) AS "RELEASE DATE".
    , TRUNC (WO_START_DATE) AS 'START DATE '.
    , TRUNC (WO_CLOSED_DATE) AS "CLOSED DATE".
    STOCK_TRAN. QTY_CHANGE

    Of
    WORK_ORDER
    , (SELECT SUM (QTY_CHANGE) AS "QTY WORKED" IN STOCK_TRAN)
    WHERE
    SITECODE = 'CFI '.
    AND STOCK_TRAN_CODE = 'P '.
    AND DATE_TRAN = TRUNC (SYSDATE - 1).
    AND WORK_ORDER. SITECODE = STOCK_TRAN. SITECODE
    AND WORK_ORDER. PARTNO = STOCK_TRAN. PARTNO)_

    WHERE
    WORK_ORDER_TYPE = 'K '.
    AND SITECODE = 'CFI '.
    AND (TRUNC (WO_CLOSED_DATE) = TRUNC (SYSDATE - 1) OR STOCK_TRAN.) DATE_TRAN = TRUNC (SYSDATE-1))
    AND QTY_FINISHED > 0

    ORDER BY WO_PRIORITY DESC

    Then it looks like you want

    SELECT
        SITECODE
      , WORK_ORDER_NUMBER AS "WO #"
      , partno
      , WO_PRIORITY AS "PRIORITY"
      , QTY_WORK_ORDER
      , QTY_FINISHED
      , TRUNC(WO_RELEASE_DATE) AS "RELEASE DATE"
      , TRUNC(WO_START_DATE) AS "START DATE"
      , TRUNC(WO_CLOSED_DATE) AS "CLOSED DATE"
      , STOCK_TRAN.QTY_WORKED
    FROM
        WORK_ORDER
      , (SELECT SUM(QTY_CHANGE) AS QTY_WORKED
                , sitecode
                , partno
           FROM STOCK_TRAN
         WHERE SITECODE = 'FCI'
           AND STOCK_TRAN_CODE = 'P'
           AND DATE_TRAN = TRUNC(SYSDATE - 1)
         GROUP BY sitecode, partno ) stock
     WHERE stock.sitecode = work_order.sitecode
        AND stock.partno = work_order.partno
        AND WORK_ORDER_TYPE = 'K'
        AND SITECODE = 'FCI'
        AND (TRUNC(WO_CLOSED_DATE) = TRUNC(SYSDATE - 1) OR STOCK_TRAN.DATE_TRAN = TRUNC(SYSDATE -1) )
        AND QTY_FINISHED >0
     ORDER BY WO_PRIORITY DESC
    

    Justin

  • I updated to windows 10 and installed items 14 64 bit.and is set by default to open .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how to sort gratefully receiving

    I have updated to 10 Windows and installed the 14 64-bit elements and makes it the default program for opening .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how do the sorting gratefully received

    Sort problem! I need the Adobe folder and use the Adobe Photoshop elements 14 .exe 'association' as my default file

  • some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

    some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

    Work within a site defined in DW?

    All images cropped and size?

    Are all the images for the Web as optimized JPG?

    All images are saved in your folder of Site Local DW?

    Nancy O.

  • Exchange image BG won't work - any ideas why not?

    http://designerandpublisher.com/test-BG/test-BG-page01.html

    Hi - I am trying to establish an exchange of background image where when the user visits the site and by clicking on the links, the background image changes.  You will see the soldier one there now and I have others.

    The JS file 2 HTML pages are linked to the does not seem to work [see above].

    No idea why it does not work, or is there a better JS file anyone can be aware of which isn't what I'm looking for?

    Thank you - Guy deaf

    Change of body to #swapBg as below:

    {#swapBg}

    background-repeat: repeat no.;

    background-attachment: fixed;

    left margin: 0px;

    margin-top: 0px;

    margin-right: 0px;

    margin-bottom: 0px;

    }

  • The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

    The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

    I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

    am driven crazy by this so any advice would be welcome...

    Hello

    My friend John Papa - MVP - is the expert on Windows Movie Maker.

    PapaJohn.org
    http://Papajohn.org/

    PapaJohn - online tutorials
    http://www.Papajohn.org/mm2-online-tutorials.html

    Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
    http://www.windowsmoviemakers.NET/tutorials/

    Windows Live Movie Maker Forums are good sources of information:

    Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
    http://windowslivehelp.com/

    Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
    http://windowslivehelp.com/product.aspx?ProductID=5

    ====================

    These might help:

    Getting started with Windows Movie Maker

    Import video, photos and audio on Windows Movie Maker

    Import video from a videotape

    Get a movie in Windows Movie Maker

    Make a movie quickly in Windows Movie Maker (AutoMovie)

    Publish a movie in Windows Movie Maker

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Why Vista will not connect to the internet wherever I'm connected with my XP machine?

    Why my computer won't get online wherever I like Xp only

    Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

    Hello

    1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

    2 have you tried all of the suggestions of Fahimulla K?

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    See also:

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

    I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

    Depends on what you used for the backup.

    If you used the windows backup or another backup software will contain the entire disk will be a backup file, and view/use this file, you use the same software that allows you to save.

  • Problem opening pdf files.  I have Acrobat Reader DC/Windows by default, but when I click on the file, a file conversion screen with all these codes. Must use the "open with" function which is a nuisance.  Why it will not default?

    Problem opening pdf files.  I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance.

    Why it will not open by default when I click on the file?

    Hello

    I guess that you are looking for this:

    Open drive

    Go in Edition > Preferences > General

    Uncheck the option, the online storage see the opening of the files

    Click OK and restart

    Thank you

    Abhishek

  • My Windows Media Player will not play mu movies in AVI format.

    Media Player

    My Windows Media Player will not play mu movies in AVI format, it was up until about a week ago, running vista home basic 32 bit. What is the problem here and how can it be solved?
    See you soon
    Greg

    Several things you might try: -.

    Restore.You try system can restore your computer to a point before the startup problem occurring.

    You can download and install codecs: -.

    http://Shark007.NET/vistacodecpackage.html

    Try another media player, like VLC Player: -.

    http://www.videolan.org/VLC/download-Windows.html

  • Any ideas why my Satellite L30-101 is not turn on?

    I have a L30-101, which does not any power whatsoever.
    There are 19v from the Jack that goes in the back of the laptop but where it goes from there I don't know.

    None of the lights on the front of the machine to recognize any signs of power. It will not charge the battery is totally dead
    Someone at - it ideas? The laptop had no much use, as was a second device, but it just won't work and driving me crazy. He won't show signs of life at all.

    Any help would be appreciated.

    Lewis

    > It 19v come from the Jack that goes on the back of the laptop but where it goes from there I don't know.
    > None of the lights on the front of the machine to recognize any signs of power. It will not charge the battery is totally dead
    > Anyone has any ideas?

    How about a dead motherboard?
    Failure of the motherboard may be the reason for this

    It would be the worst case since the motherboard is some of the most expensive and deeper cases there s no need to replace it as a new laptop would be more expensive

  • Hi my website it works fine on all other browsers but on firefox it does not display correctly. I expect to send a screenshot to see if anyone had any ideas why this might occur.

    I'm almost finished my website and on all other browsers I've tried the site load properly, but some expandable boxes on my Web site do not appear on firefox.

    Anyone has any ideas on how I can fix it.
    [http://tinypic.com/r/2rwvk7n/5]
    [http://tinypic.com/r/69fbdd/5]

    It's firefox on mac.

    Upgrade your browser Firefox 8 and check

  • formItem direction: vertical, does not work... any idea why?

    Hey guys... im basically trying to place my text box just below my formItem label and after some research, I discovered that I just need to add the formItem layout = "vertical"...

    the code I have is

         for each(var item:Object in menuItems){
              var formItem:FormItem = new FormItem();
              for each(var category:Object in categories){
                   if(item.Type == category.Id){
                        formItem.label = category.DisplayName;
                        formItem.setStyle("labelStyleName", "formItemLabelLeft");
         //----------->          formItem.direction = "vertical";
    
                   }
              }
              var textArea:TextArea = new TextArea();
              textArea.text = item.Description;
              textArea.height = 50;
              formItem.addElement(textArea);
              menuForm.addChild(formItem);
         }
    

    any ideas?

    Not sure, I understand the need to use a container of form, but if you want an easy solution, try to use a FormHeading to show labels instead of set the FormItem label:


    http://ns.Adobe.com/MXML/2009.
    xmlns:s = "library://ns.adobe.com/flex/spark".
    xmlns:MX = "library://ns.adobe.com/flex/mx" >
       
       
           
           
               
               
           

           
           
               
               
           

       

       

    Peter

  • Why HP will not be on an update of their Intel HD 3000 graphics card?

    Hey everybody!

    I like to play world of Warcraft on my DV7 portable entertainment and they just made an update of last week.  Now they tell me that my graphics card is outdated.  I went on the Intel site and there has been some updates since the last time that my graphics card has been updated in 2011.

    I read that you can do an update from the Intel site since HP customizes all their ups drivers and I don't understand why HP did not actually updates the graphics card so long when they prefetch wow on their laptops.    The game world is constantly evolving and needs these updates to continue to play without any problems.

    Does anyone have a solution to my problem or suggestions?

    Thank you!

    First do me a favor and just to be sure, look in under Graphics Device Manager and tell me what you see. If it is switchable, you will have two devices it. You must also have a nVidia or AMD Catalyst Control Center in the programs list. If you have any of these, then you have no switchable graphics and we can proceed to install the latest drivers from Intel.

    This is the driver package you need:

    Drivers you need

    It gives instructions on how to make the 'force' or manual installation of the graphics driver.

    http://www.Intel.com/support/graphics/sb/CS-022355.htm

    As stated in the pick instructions the pilots .zip version. They were dated August 2013 and later for the HD 3000. I have looked at some sites WOW talk about new updates and you don't be surprised if the update of the pilots is not all you need. There is an exchange of views that the game may have gotten too demanding for integrated video chips and your Intel HD 3000 can be up to manipulate the game more playable resolutions and with decent video features. But before we go there we will try update the driver. Don't forget that you understand before you pull the trigger on this. Post back if you need help most.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Why CS4 will not open DNG files converted from raw Olympus E - M1 files?

    For several years, I was able to use the DNG Converter to convert. My E - M1 Olympus ORF raw files and then open them for treatment in CS4. Suddenly CS4 quit recognizing these DNG files saying "Photoshop could not complete your request because Photoshop does not recognize this type of file"

    I have not changed preferences. I use E - M1 v3.0, DNG Converter v8.3.0.141 on a Mac. I deleted the converter DNG several times, even reinstalled an earlier version, but nothing does not change.

    However, CS4 will open the converted DNG files from Pentax raw. PEF files of my K-5. Weird. This is the Olympus raw DNG conversions that will not open.

    I can view the DNG files converted into question in the preview of the Mac just fine, but CS4. Any ideas will be appreciated.

    Don't forget the compatibility of the DNG Converter is defined to provide support for your version of ACR:

    Benjamin

Maybe you are looking for